Abstract:Quasi-2D halide perovskites, especially the Ruddlesden–Popper perovskites (RPPs), have attracted great attention because of their promising properties for optoelectronics; however, there are still serious drawbacks, such as inefficient charge transport, poor stability, and unsatisfactory mechanical flexibility, restricting further utilization in advanced technologies. Herein, high-quality quasi-2D halide perovskite thin films are successfully synthesized with the introduction of the unique bication ethylenediammonium (EDA) via a one-step spin-coating method. This bication EDA, with short alkyl chain length, can not only substitute the typically bulky and weakly van der Waals-interacted organic bilayer spacer cations forming the novel Dion–Jacobson phase to enhance the mechanical flexibility of the quasi-2D perovskite (e.g., EDA(MA)n−1PbnI3n+1; MA = CH3NH3+) but also serve as a normal cation to achieve the more intact films (e.g., (iBA)2(MA)3–2x(EDA)xPb4I13). When fabricated into photodetectors, these optimized EDA-based perovskites deliver an excellent responsivity of 125 mA/W and a fast response time down to 380 μs under 532 nm irradiation. More importantly, the device with the Dion–Jacobson phase perovskite can be bent down to a radius of 2 mm and processed with 10,000 cycles of the bending test without any noticeable performance degradation because of its superior structure to RPPs. Besides, these films do not exhibit any material deterioration after ambient storage for 30 days. All these performance parameters are already comparable or even better than those of the state-of-the-art RPPs recently reported. This work provides valuable design guidelines of the quasi-2D perovskites to obtain high-performance flexible photodetectors for next-generation optoelectronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09651?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09651</a>.FWHM in the XRD patterns, PL, SEM images, I–V curves, EQE, detectivity, and high-resolution current versus time curves of the samples in Group 1 and Group 2; photoresponse properties of the "glass/ITO/EDA4/Au" device; photocurrents and XRD patterns of EDA4 and the samples in Group 2 after ambient storage with a humidity of 60%; and experimental setup for the photodetector measurement (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09651/suppl_file/am0c09651_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-performance photodetector based on quasi-two-dimensional Ruddlesden–Popper perovskite PEA2FA2Pb3Br10 film

Ultrathin Single‐Crystalline 2D Perovskite Photoconductor for High‐Performance Narrowband and Wide Linear Dynamic Range Photodetection

High responsivity VIS-NIR photodetector based on (PEA)2PbI4/P3HT Heterojunction

2D Ruddlesden-Popper perovskite ferroelectric film for high-performance, self-powered and ultra-stable UV photodetector boosted by ferro-pyro-phototronic effect and surface passivation

Highly Sensitive Self‐Powered 2D Perovskite Photodiodes with Dual Interface Passivations

Air-Stable and Self-Driven Perovskite Photodiodes with High On/Off Ratio and Swift Photoresponse.

Quasi‐2D Ruddlesden–Popper Perovskites with Low Trap‐States for High Performance Flexible Self‐Powered Ultraviolet Photodetectors

Perovskite-Type 2D Materials for High-Performance Photodetectors

High‐Sensitivity and Fast‐Response Photomultiplication Type Photodetectors Based on Quasi‐2D Perovskite Films for Weak‐Light Detection

2D Perovskites with Giant Excitonic Optical Nonlinearities for High‐Performance Sub‐Bandgap Photodetection

High‐Resolution and Stable Ruddlesden–Popper Quasi‐2D Perovskite Flexible Photodetectors Arrays for Potential Applications as Optical Image Sensor

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

High‐Performance Quasi‐2D Perovskite/Single‐Walled Carbon Nanotube Phototransistors for Low‐Cost and Sensitive Broadband Photodetection

Two-Dimensional (c4h9nh3)(2)pbbr4 Perovskite Crystals for High-Performance Photodetector

Flexible Array of High Performance and Stable Formamidium-Based Low-n 2D Halide Perovskite Photodetectors for Optical Imaging

Flexible Quasi‐2D Perovskite/IGZO Phototransistors for Ultrasensitive and Broadband Photodetection

2D Ruddlesden‐Popper Sn‐Based Perovskite Weak Light Detector for Image Transmission and Reflection Imaging

High-performance photodetector based on two-dimensional perovskite crystals with alternating interlayer cations

Gradient 2D–3D Ruddlesden-Popper perovskite film for high-performance self-powered photodetectors

Bication-Mediated Quasi-2D Halide Perovskites for High-Performance Flexible Photodetectors: From Ruddlesden–Popper Type to Dion–Jacobson Type

Real Time and Highly Sensitive Sub‐Wavelength 2D Hybrid Perovskite Photodetectors