Abstract:Conventional fluids used in fission‐based water‐cooled nuclear reactors have lower heat transfer coefficients and thermal conductivity, prompting researchers to explore high‐performance fluids to enhance heat transfer and prevent core meltdown during accidents. It is crucial to investigate fluids that can improve thermal hydraulic characteristics, such as the heat transfer coefficient, critical heat flux (CHF), and minimum departure from nucleate boiling ratio (MDNBR). This study investigates the effectiveness of nanofluids in enhancing heat transfer parameters, including thermal conductivity and heat capacity. Results indicate that the silver water nanofluid outperformed the other nanofluids and pure water. The silver water nanofluid demonstrated a 67.15 % improvement in the average heat transfer coefficient and a 45.23 % enhancement in MDNBR compared to pure water. This study underscores the promise of nanofluids, particularly Ag–H2O, in enhancing the thermal performance and safety of water‐cooled nuclear reactors. Future research should continue to explore various nanofluids and their applications to further optimize reactor design and operation, ensuring both efficiency and safety in nuclear energy production. Conventional fluids used in fission‐based water‐cooled nuclear reactors have lower heat transfer coefficients (HTCs) and thermal conductivity, which has led researchers to explore high‐performance fluids that can enhance heat transfer in routine operation and prevent core meltdown in the case of accidents. It is important to investigate a wide range of fluids that can help designers improve thermal hydraulic characteristics, such as HTC, critical heat flux, and minimum departure from nucleate boiling ratio (MDNBR). In this study, the effectiveness of nanofluids in enhancing heat transfer parameters, including thermal conductivity and heat capacity, was investigated. Four different nanofluids (Al2O3–H2O, ZrO2–H2O, Ag–H2O, and Si–H2O) with pure water as the primary coolant in an HPR‐1000 nuclear reactor were compared using computational methods. Due to computational limitations, only the flow channel among four fuel rods with the highest power density in the core was simulated using Eulerian computational fluid dynamics. The results of this study show that silver water (Ag–H2O) nanofluid outperformed other nanofluids and pure water. It had a higher average HTC and MDNBR, with a 67.15 % and 45.23 % improvement, respectively, compared to pure water. The fuel rod wall temperature was also reduced by 28.5 K with Ag–H2O compared to water. Comparison of current simulated results with literature data shows a good agreement.

Experimental investigation of the performance of silver nanofluid as a coolant in a helical shell and tube heat exchanger

Enhancing heat transfer efficiency and energy improvement through novel biosynthesized aqua-based silver nanofluid from leaf extract in a helical double pipe heat exchanger: a comprehensive investigation

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Enhancing Heat Transfer Performance: Nanofluids Application in Helical Microfin Tube Concentric Heat Exchangers

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Enhancing heat transfer efficiency in shell-and-tube heat exchangers with SiC and CNT-infused alkaline water nanofluids

A critical insight on nanofluids for heat transfer enhancement

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

A numerical study of water based nanofluids in shell and tube heat exchanger

Numerical Study of Flow and Heat Transfer Characteristics for Al2O3 Nanofluid in a Double-Pipe Helical Coil Heat Exchanger

Experimental evaluation of passive and active cooling methods for high-concentration photovoltaic systems using nanofluids

Improved Heat Transfer Capabilities of Nanofluids—An Assessment Through CFD Analysis

Experimental investigation of a novel heat exchanger for optimizing heat transfer performance using Al2O3-water nanofluids

Thermo-hydraulic performance of metal oxide nanofluid flow through the helical coil tube of a three-fluid heat exchanger: an experimental and optimization study

Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids

Computational investigation on the energy efficiency of heat exchangers using Al2O3 nanofluids

Analysis of shape dependency of thermal conductivity of silver-based nanofluids

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Experiment on Heat Exchanger Using Innovative Coils and Phase Change Material/MXene Nanofluids

A novel application for energy efficiency improvement using nanofluid in shell and tube heat exchanger equipped with helical baffles

Recent Achievements in Heat Transfer Enhancement with Hybrid Nanofluid in Heat Exchangers: A Comprehensive Review