Abstract:Aqueous zinc-ion batteries (ZIBs) represent an attractive choice for energy storage. However, ZIBs suffer from dendrite growth and an irreversible consumption of Zn metal, leading to capacity degradation and a low lifetime. In this work, a zinc–alginate (ZA) hydrogel–polymer electrolyte (HGPE) with a non-porous structure was prepared via the solution-casting method and ion displacement reaction. The resulting ZA-based HGPE exhibits a high ionic conductivity (1.24 mS cm−1 at room temperature), excellent mechanical properties (28 MPa), good thermal and electrochemical stability, and an outstanding zinc ion transference number (0.59). The ZA-based HGPE with dense structure is proven to benefit the prevention of the uneven distribution of ion current and facilitates the reduction of excessive interfacial resistance within the battery. In addition, it greatly promotes the uniform deposition of zinc ions on the electrode, thereby inhibiting the growth of zinc dendrites. The corresponding zinc symmetric battery with ZA-based HGPE can be cycled stably for 800 h at a current density of 1 mA cm−2, demonstrating the stable and reversible zinc plating/stripping behaviors on the electrode surfaces. Furthermore, the quasi-solid-state ZIB with zinc, ZA-based HGPE, and Ca0.24V2O5 (CVO) as the anode, electrolyte, and cathode materials, respectively, show a stable cyclic performance for 600 cycles at a large current density of 3 C (1 C = 400 mA g−1), in which the capacity retention rate is 88.7%. This research provides a new strategy for promoting the application of the aqueous ZIBs with high performance and environmental benignity.

High-rate aqueous zinc-ion batteries enabled by a polymer/graphene composite cathode involving reversible electrolyte anion doping/dedoping

A Polymer/Graphene Composite Cathode with Active Carbonyls and Secondary Amine Moieties for High-Performance Aqueous Zn-Organic Batteries Involving Dual-Ion Mechanism.

Organic-inorganic Hybrid Cathode Enabled by In-Situ Interface Polymerization Engineering Boosts Zn2+ Desolvation in Aqueous Zinc-Ion Batteries

Anchoring Polyiodide to Conductive Polymers As Cathode for HighPerformance Aqueous Zinc-Iodine Batteries

In Situ Fabricated Poly(1,8‐naphthalenediamine)/Active Carbon Composite Cathodes for Aqueous Zinc‐Ion Batteries with High Active Sites Utilization and Ultralong Life Span of 50 000 Cycles

An Ultrafast, Durable, and High‐Loading Polymer Anode for Aqueous Zinc‐Ion Batteries and Supercapacitors

High Capacity and Long-Life Aqueous Zinc-Ion Battery Enabled by Improving Active Sites Utilization and Protons Insertion in Polymer Cathode

Improving Zn2+ Migration Via Designing Multiple Zincophilic Polymer Electrolyte for Advanced Aqueous Zinc Ion Batteries

Electrochemical oxidation of - coupling organic cathode for enhanced zinc ion storage

Electropolymerization of a Carbonyl-Modified Dihydropyrazine Derivative for Aqueous Zinc Batteries with Ultrahigh Cycling Stability

Synergetic Modulation of Ion Flux and Water Activity in a Single Zn 2+ Conductor Hydrogel Electrolyte for Ultrastable Aqueous Zinc-Ion Batteries

Novel Zn0.079V2O5·0.53H2O/Graphene aerogel as high-rate and long-life cathode materials of aqueous zinc-ion batteries

Highly Reversible and Stable Zinc Anode Enabled by a Fully Conjugated Porous Organic Polymer Protective Layer

Highly Reversible Zinc Anode Achieved by Surface Polyimide Coating for High‐Performance Aqueous Zinc‐Ion Batteries

Zn-doped manganese tetroxide/graphene oxide cathode materials for high-performance aqueous zinc-ion battery

Two-Dimensional Conductive Polymer/V2O5 Composite with Rapid Zinc-Ion Storage Kinetics for High-Power Aqueous Zinc-Ion Battery

Towards High‐Performance Aqueous Zinc Batteries Via a Semi‐Conductive Bipolar‐Type Polymer Cathode

Low-Cost Zinc–Alginate-Based Hydrogel–Polymer Electrolytes for Dendrite-Free Zinc-Ion Batteries with High Performances and Prolonged Lifetimes

Interface Engineering with Dynamics‐Mechanics Coupling for Highly Reactive and Reversible Aqueous Zinc‐Ion Batteries

2,3-diaminophenazine as a high-rate rechargeable aqueous zinc-ion batteries cathode

Highly reversible Zn anodes enabled by in-situ construction of zincophilic zinc polyacrylate interphase for aqueous Zn-ion batteries