Abstract:Purpose A computational fluid dynamics (CFD) analysis has been carried out on the aerodynamic and thermal behavior of an incompressible Newtonian fluid having a constant property and flowing turbulently through a two-dimensional horizontal high-performance heat transfer channel with a rectangular cross section. The top surface of the channel was kept at a constant temperature, while it was made sure to maintain the adiabatic condition of the bottom surface. Two obstacles, with different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel; they were fixed to the top and bottom surfaces of the channel in a periodically staggered manner to force vortices to improve the mixing and consequently the heat transfer. The first fin-type obstacle is placed on the heated top channel surface, and the second baffle-type one is placed on the insulated bottom surface. Five different obstacle situations were considered in this study, which are referred as cases FF (flat fin and flat baffle), FVD (flat fin and V-downstream baffle), FVU (flat fin and V-upstream baffle), VVD (V-downstream fin and V-downstream baffle) and VVU (V-Upstream fin and V-upstream baffle). Design/methodology/approach The flow model is governed by Reynolds-averaged Navier–Stokes equations with the k-epsilon turbulence model and the energy equation. These governing equations are discretized by the finite volume method, in two dimensions, using the commercial CFD software FLUENT software with the Semi Implicit Method for Pressure Linked Equations (SIMPLE) algorithm for handling the pressure-velocity coupling. Air is the test fluid with the flow rate in terms of Reynolds numbers ranging from 12,000 to 32,000. Findings Important deformations and large recirculation regions were observed in the flow field. A vortex causes a rotary motion inside the flow field, which enhances the mixing by bringing the packets of fluid from the near-wall region of the channel to the bulk and the other way around. The largest value of the axial variations of the Nusselt number and skin friction coefficient is found in the region facing the baffle, while the smallest value is in the region near the fin, for all cases. The thermal enhancement factor (TEF) was also introduced and discussed to assess the performance of the channel for various obstacle situations. It is found that the TEF values are 1.273-1.368, 1.377-1.573, 1.444-1.833, 1.398-1.565 and 1.348-1.592 for FF, FVD, FVU, VVD and VVU respectively, depending on the Re values. In all cases, the TEF was found to be much larger than unity; its maximum value was around 1.833 for FVU at the highest Reynolds number. Therefore, the FVU may be considered as the best geometrical configuration when using the obstacles to improve the heat transfer efficiency inside the channel. Originality/value This study can be a real application in the field of shell-and-tube heat exchangers and flat plate solar air collectors.

Thermo‐flow behavior of air-channel heat exchanger with nonidentical baffle lengths: computational analysis

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Heat Enhancement in a Short Air Channel with Solid and Permeable Baffles

COMPUTATIONAL THERMAL ANALYSIS OF TURBULENT FORCED-CONVECTION FLOW IN AN AIR CHANNEL WITH A FLAT RECTANGULAR FIN AND DOWNSTREAM V-SHAPED BAFFLE

Baffle orientation and geometry effects on turbulent heat transfer of a constant property incompressible fluid flow inside a rectangular channel

Numerical simulation of turbulent airflow and heat transfer through a rectangular channel along with two trapezoidal baffle plates: Comparison between plane and trapezoidal shape baffles

Numerical Simulations of Heat Transfer Phenomena through a Baffled Rectangular Channel

Heat Convection in a Channel-Opened Cavity with Two Heated Sources and Baffle

Steady and unsteady numerical investigation of mixed convective heat transfer enhancement in a channel with baffles attached to the heated wall

Numerical Analysis of Fluid Flow and Heat Transfer in Entrance and Fully Developed Regions of a Channel With Porous Baffles

Enhancing performance in solar air channels: A numerical analysis of turbulent flow and heat transfer with novel shaped baffles

Experimental investigation of the performance attributes of a double pipe heat exchanger equipped with baffles of conventional or flower layouts

Calculation of turbulent flow and heat transfer in a porous-baffled channel

Heat transfer and thermal–hydraulic evaluations of cross-circular grooved rectangular flow ducts depending on rectangular baffle design parameters

Use of porous baffles to enhance heat transfer in a rectangular channel

The effect of trapezoidal baffles on heat and flow characteristics of a cross-corrugated triangular duct

Structural Mechanics of Flexible Baffle Used in Enhancing Heat Transfer of Power Law Fluids in Channel-Trapezoidal Cavity

Numerical Simulation on Heat Transfer Augmentation by Using Innovative Hybrid Ribs in a Forward-Facing Contracting Channel

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations

Effects of geometry on the thermal-fluid dynamics of a transition water flow in an square heated asymmetric cavity channel

Experimental Study of Boiling Heat Transfer and Flow Characteristics in Fin Channels with Variable Cross Section