Abstract:In this paper, the vortex-induced vibration (VIV) of a main cylinder with two symmetrically arranged control rods at Reynolds number of 500 is numerically simulated. The control rods and the main cylinder are connected rigidly and can move synchronously, which is modeled as a spring oscillator with double degree of freedom. Seven gap ratios (G/D= 0.1 ∼2) and sixteen angles (α= 15° ∼165°) are used to model the cylinder system. Thirteen flow patterns are identified, and the VIV of the cylinder system in every flow pattern is discussed separately. It is found that the characteristics of the VIV of the cylinder system are similar in the same flow pattern, which may give a way to understand the VIV of the multiple cylinders further. Based on the classification in previous researches, some advanced insights into the passive control are achieved. The control rods located in the boundary layer (G/D= 0.1) can change the VIV of the main cylinder most effectively, and the effect decreases with increasing gap ratio. The control rods immerged in the wake of the main cylinder may result in sub-harmonic resonance, while the control rods located centrally in front of the main cylinder does not obviously affect the VIV of the main cylinder. As G/D= 0.1 ∼0.7, overall, the control rods located nearly side-by-side with main cylinder can amplify the VIV, while the control rods located downstream of the main cylinder can suppress the VIV. As G/D= 1 ∼2, the control rods can suppress the VIV slightly, and the effect increases with increasing gap ratio and decreasing angle. For G/D= 0.1 & α= 105°, the VIV is magnified for maximum effect, and the peak amplitude is about twice that of the single cylinder. For G/D= 0.2 & α= 45°, the VIV is suppressed for maximum effect, and the peak amplitude is about 0.88% of that of the single cylinder.

Vortex induced vibration control of a cactus-shaped cylinder with porous spines

Vortex-induced vibration suppression of cactus-like cylinders

Control of Vortex-Induced Vibration of an Elastically Mounted Cylinder with a Pair of Porous Rods

The Effects of Cactus Inspired Spines on the Aerodynamics of A Cylinder

Control of Flow-Induced Vibration of a Circular Cylinder with a Porous Splitter Plate

Simulations on Hydrodynamic Coefficients of Stationary Cactus-Shaped Cylinders at a Low Reynolds Number

Large-eddy Simulation of Vortex-Induced Vibration of a Circular Cylinder at Reynolds Number 10 000

Reduction in Drag and Vortex-Induced Vibration of a Circular Cylinder Covered by a Porous Layer in the Laminar Regime

Numerical investigation of vortex-induced vibration of a porous-coated cylinder at subcritical Reynolds number with a combined k - ε model for porous medium

Vortex-induced Vibrations of a Circular Cylinder with Two Symmetrically Arranged Control Rods

Vortex-induced vibration response of a circular cylinder surrounded with small rods

A numerical simulation of VIV on a flexible circular cylinder

VIV Suppression for a Large Mass-Damping Cylinder Attached with Helical Strakes

Suppression of Vortex-Induced Vibration Caused by A Terebridae-Inspired Cylinder with Different Helical Angles

Suppression of Vortex-Induced Vibration of A Circular Cylinder Using Suction-Based Flow Control

Spatially Filtered Vibration Control of Cylindrical Shells

Vortex-induced Vibration and Structure Instability for a Circular Cylinder with Flexible Splitter Plates

Numerical simulation of VIV for a circular cylinder with a downstream control rod at low Reynolds number

Vortex-induced vibration of two circular cylinders in a side-by-side arrangement at moderate Reynolds number: A numerical study

Experimental investigation on the vortex-induced vibration of a circular cylinder partially covered with moss

Experimental Investigation on Suppressing Circular Cylinder VIV by a Flow Control Method Based on Passive Vortex Generators