Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Aging-induced complex transformation behavior of martensite in Ni57.5Mn17.5Ga25 shape memory alloy

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Effect of aging on martensitic transformation behavior of Ti 48.8 Ni 50.8 V 0.4 alloy

Effect of aging on martensitic transformation behavior of Ti<sub>48.8</sub>Ni<sub>50.8</sub>V<sub>0.4</sub> alloy

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

Structure, Martensitic Transformations, and Mechanical Properties of Aging Nanocrystalline Ti–50.9 at % Ni Alloy

Study of ageing and size effects in Nickel–Titanium shape memory alloy using molecular dynamics simulations

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

The Effects of Ti3Ni4 Precipitates on the R-phase Transformation

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy

Transformation Behavior and Shape Memory Effect of Ti 50− X Ni 48 Fe 2 Nb X Alloys by Aging Treatment

Effect of ageing treatment on the transformation behaviour of Ti-50.9 at.% Ni alloy

Study on Aging Effect and Mechanism of Cu-11.1Al-6.5Mn-1.6Zn-0.1Zr Shape Memory Alloy

Grain Size Effect on the Martensitic Transformation of Ni50Mn25Ga17Cu8 High-Temperature Shape Memory Alloy

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

Features of Decomposition and the Mechanical Properties of an Aging Shape Memory Ti49Ni51 Alloy Subjected to Heat Treatment

Microstructure and Thermoelastic Martensitic Transformation in Ni-Low and -Rich Ni–Ti–Hf–Nb Hightemperature Shape Memory Alloys

Martensitic Transformation And Related Magnetic Effects In Ni-Mn-Based Ferromagnetic Shape Memory Alloys

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Microstructure and martensitic transformation of Ti49Ni51−Hf high temperature shape memory alloys

Effect of Ageing Treatment on the Deformation Behaviour of Ti–50.9 At.% Ni