Abstract:BACKGROUND: Computed tomographic angiography (CTA) is the gold standard in the diagnosis of most vascular pathologies. The optimal method to improve this technique is the use of anthropomorphic tissue-mimicking phantoms, since CTA is accompanied by radiation exposure and the risk of allergic reactions when using contrast agents. In addition to compliance with the X-ray properties of the vessel, the pulsations occurring in the aorta in vivo must be simulated. A review of existing solutions demonstrates a small number of national developments in this area at a relatively high cost of foreign analogues. Moreover, the lack of reproducible methodology for creating pulse flow simulation devices using available and inexpensive materials is worth noting. AIM: To develop a hydraulic circuit to simulate pulse blood flow in a tissue-mimicking aortic phantom. METHODS: A literature analysis of existing pulse flow simulation devices and tissue-mimicking phantoms of the abdominal aorta was conducted. The medical and technical requirements for the designed device were formulated. The control circuit was developed, the circuit element base was determined, and the hydraulic circuit prototype was assembled. Based on a literature review, a material suitable for reproducing the biomechanical characteristics of arterial tissue was selected. A simplified phantom of the abdominal aortic segment was made. The device model included a simplified abdominal aortic phantom, a control system, a pump, a pressure sensor, a flow meter, and a flow regulator. Initial testing of the developed circuit in the basic signal mode and in the real flow profile simulation mode was performed. The basic signals were periodic rectangular signals reproduced at different frequencies, simulating normal, rapid, and slow heart rate. Using pulse-width modulation, a profile of the pressure pulse wave was obtained. RESULTS: The developed hydraulic circuit allowed successful reproduction of pressure and flow velocity profiles in a tissue-mimicking aortic phantom. Further development of the project will involve fabrication and validation of the circuit (using anthropomorphic versions of the phantom) and simulation of the angiographic study. CONCLUSIONS: The results may be useful for the improvement of CTA techniques and the development of angiosurgical training stands.

A hybrid mock circulatory loop integrated with a LED-PIV system for the investigation of AAA compliant phantoms

A Hybrid Mock Circulatory Loop for Fluid Dynamic Characterization of 3D Anatomical Phantoms

Mock circulatory loop applications for testing cardiovascular assist devices and in vitro studies

A Fast Building and Effective Hydraulic Pediatric Mock Circulatory System for the Evaluation of A Left Ventricular Assist Device

Review of Systemic Mock Circulation Loops for Evaluation of Implantable Cardiovascular Devices and Biological Tissues

In vitro benchtop mock circulatory loop for heart failure with preserved ejection fraction emulation

A hybrid mock circulatory system: development and testing of an electro-hydraulic impedance simulator

Experimental analysis of a Multilayer Flow Modulator deployment in an AAA with incorporated branch

Experimental investigation into the effect of compliance of a mock aorta on cardiac performance

Investigating the importance of left atrial compliance on fluid dynamics in a novel mock circulatory loop

In-vitro Major Arterial Cardiovascular Simulator to generate Benchmark Data Sets for in-silico Model Validation

Hydraulic circuit for pulse flow simulation in the tissue-mimicking aortic phantom

A Review of Arterial Phantom Fabrication Methods for Flow Measurement Using PIV Techniques

Development of a circulatory mock loop for biventricular device testing with various heart conditions

A Mock Circulatory Loop Analysis of Cardiorenal Hemodynamics With Intra-Aortic Mechanical Circulatory Support

A modular computational circulatory model applicable to VAD testing and training

Integrated particle image velocimetry and fluid–structure interaction analysis for patient-specific abdominal aortic aneurysm studies

Intra-aortic balloon counterpulsation timing: A new numerical model for programming and training in the clinical environment.

The role of innovative modeling and imaging techniques in improving outcomes in patients with LVAD

Development of a High-Fidelity Benchtop Model for Simultaneous Flow, Pressure, and Imaging Assessment of Transarterial Embolization Procedures

A pulsatile blood vessel system for a femoral arterial access clinical simulation model