Abstract:This study investigates a carbon-based all-perovskite tandem solar cell (AP-TSC) with the structure ITO, SnO2, Cs0.2FA0.8Pb(I0.7Br0.3)3, WS2, MoO3, ITO, C60, MAPb0.5Sn0.5I3, PEDOT: PSS, Carbon. The bandgap configuration of the cell is 1.75 eV/1.17 eV, which is theoretically limited to 36% efficiency. The effectiveness of embedding cubic plasmonic metallic nanoparticles (NPs) made of Gold (Au) and Silver (Ag) within the absorber layers to eliminate the requirement for thicker absorber layers, decrease manufacturing costs and Pb toxicity is demonstrated in our analysis. This analysis was conducted using 3D Finite Element Method (FEM) simulations for both optical and electrical calculations. Prior to delving into the primary investigation of the tandem structure, a validation simulation was conducted to demonstrate the accuracy and reliability of the simulations. Notably, the efficiency mismatch observed during the validation simulation, specifically in relation to the incorporation of metallic nanoparticles (NPs), amounted to a mere 0.01%. To mitigate the potential issues of direct contact between metallic NPs and perovskite materials, such as increased thermal and chemical instability and recombination at the NP surface, a 5 nm dielectric shell was applied to the NPs. The incorporation of cubic core-shell Ag NPs resulted in a 15.32% enhancement in short-circuit current density, from 16.39 mA/cm2 to 18.90 mA/cm2, and a 15.68% increase in overall efficiency, from 26.9 to 31.12%. This research paves the way for the integration of core-shell metallic NPs in AP-TSCs, highlighting a significant potential for efficiency and stability improvements. In a dedicated section the band alignment of the sub-cell was addressed. Additionally, a thermal investigation of the proposed tandem structure was conducted, demonstrating the robustness of the proposed AP-TSC. Finally, the sensitivity analyses related to input parameters and the challenges associated with large-scale fabrication of the proposed AP-TSC were extensively discussed.

Performance Improvement of an Ultra-Thin Film CIGS Tandem Solar Cell Using New Plasmonic Cluster Nanostructures

An innovative method of the vertical coupling effect improvement to the tandem Cu(In, Ga)Se2/perovskite solar cells using Ag cluster nanostructures

Efficiency Enhancement of Ultra-thin CIGS Solar Cells Using Bandgap Grading and Embedding Au Plasmonic Nanoparticles

Designing novel plasmonic architectures for highly efficient CIGS solar cells

Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells.

Using Spacer Layers To Control Metal And Semiconductor Absorption In Ultrathin Solar Cells With Plasmonic Substrates

Enhancing the Efficiency of Ultra-thin Perovskite Solar Cell Through Cluster of Cubic Plasmonic Nanoparticles: A Numerical Investigation

Photocurrent improvement of an ultra-thin silicon solar cell using the localized surface plasmonic effect of clustering nanoparticles

High-efficiency and Cost-Effective Manufacturing of Solar Cells Based on Localized Surface Plasmonic Resonance

Enhancing Light Absorption in Ultra-Thin Perovskite Solar Cells Using Plasmonic Gold Nanoparticle Clusters

Plasmonic Electrically Functionalized TiO2 for High‐Performance Organic Solar Cells

Improving the light absorption efficiency in thin-film plasmonic tandem solar cell

Development of a Plasmonic Light Management Architecture Integrated within an Interface Passivation Scheme for Ultrathin Solar Cells

Efficiency improvement of thin film solar cell using silver pyramids array and antireflective layer

Particle swarm optimization for performance enhancement of cadmium telluride thin film solar cells by embedded nano-grating structures with a plasmonic metal coating layer

Morphological investigation and 3D simulation of plasmonic nanostructures to improve the efficiency of perovskite solar cells

Enhanced efficiency of carbon based all perovskite tandem solar cells via cubic plasmonic metallic nanoparticles with dielectric nano shells

Optical analysis of thin film cadmium telluride solar cell using nanoparticles for efficiency enhancement

Modification of Copper-based Chalcogenide Nanocrystals' Interconnections for Efficient Hole Transportation in Perovskite Solar Cell

Optical Optimization of Ultra-Thin Crystalline Silicon Solar Cells by a Co-Simulation Approach of FEM and GA