Abstract:In this study, a series of artificial rock joint specimens were subjected to a pre-peak cyclic loading test. The effects of the initial joint roughness parameters (Z2(initial)), joint wall compressive strength (JCS), normal stress during cycle (σnc), cycle frequency (f), cycle amplitude (A), and cycle number (N) on the mechanical behaviors and asperity degradation were studied extensively. The results revealed that the joint surface degradation coefficient Rd and the joint surface degradation thickness Td were positively correlated with f, A, and N and negatively correlated with the JCS. As Z2(initial) and σnc increased, \({\varvec{T}}_{\varvec{d}}\) increased, and Rd decreased. It was concluded that specimens with larger Z2(initial) and σnc were dominated by vertical degradation, whereas specimens with smaller Z2(initial) and σnc were dominated by horizontal degradation. The joint roughness parameter Z2(N) decreased with increasing f, A, Z2(initial), σnc, and N but decreased with decreasing JCS. As N increased, the rate of decrease in Z2(N) transitioned from fast to slow, and the degradation process was divided into a rapidly declining stage and a slowly declining stage. Based on regression analyses, a joint asperity degradation model was presented to calculate the joint roughness parameters Z2(N) of rock joints under various influential factors in the pre-peak cyclic loading stage. Additionally, based on the constant normal load (CNL) direct shear test on the specimens after cycling, it was found that with an increase in N, the peak stress, residual stress, and peak dilation decreased, while the peak shear displacement increased. Finally, a critical condition was presented to assess the joint pre-peak cyclic loading stage, and the critical cycle number Nc of the joint from the pre-peak cyclic loading stage that was transmitted to the peak shear stress stage was proposed.

Effect of load frequency and amplitude of displacement on soft synthetic rock joints under cyclic shear loads

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

On Size Effect of Rock Joints Roughness Based on Varied Statistical Methods

Effect of Varying Normal Stiffness on Soft Rock Joints under Cyclic Shear Loads

Studying the normal stress influential factor on rock joint stiffness using CNL direct shear test

Experimental Study of Mechanical Behaviour of Rock Joints Under Cyclic Loading

Effects of Cyclic Loading on the Shear Behaviour of Infilled Rock Joints Under Constant Normal Stiffness Conditions

Effect of Joint Type on the Shear Behavior of Synthetic Rock

Effect of Dynamic Cyclic Shear on Frictional Strength Weakening of a Plane Joint

Investigation on Acoustic Emission Kaiser Effect and Frequency Spectrum Characteristics of Rock Joints Subjected to Multilevel Cyclic Shear Loads

Effect of Cyclic Shear Loading on Shear Performance of Rock Bolt Under Different Joint Roughness

Effects of Joint Roughness, Shear Rate, and Normal Stress on Shear Behavior and Acoustic Emission Characteristics in Two Parallel Coplanar Intermittently Jointed Rock: An Experimental Study

Asperity Degradation Characteristics and Mechanical Behavior of Rock Joints Subjected to Pre-peak Cyclic Loading

Shear strength deterioration effect of rock mass joint surface under cyclic shear load

Shear fracture behavior and damage constitutive model of rock joints considering the effect of pre-peak cyclic loading

Experimental and numerical studies on the shear mechanical behavior of rock joints under normal vibration loads

Failure Characteristics and Scale in a Sandstone Joint Subjected to Direct Shear Testing: Experimental Investigation with Acoustic Emission Monitoring

Study on Shear Slip Characteristics of Sandstone Plane Joints under Normal Dynamic Load Disturbance

Dynamic mechanical behavior and failure characteristics of jointed rock-like specimen under impact load

Experimental assessment on the dynamic mechanical response of rocks under cyclic coupled compression-shear loading