Abstract:This work presents a novel method to acquire the effective convection heat transfer coefficients on the interfaces of wall-fluid contacts and sphere-fluid in both the near-wall region and core region of sphere-packed beds. Pore-scale numerical simulations are first conducted for different porosities pertaining to two regular body-centered cubic and face-centered cubic packings, packing lattice angles, inflow velocities, and ratios of the thermal conductivities of the solid and fluid. A finite-thickness metal reactor wall is included in the pore-scale simulation to make the heating boundary conditions more realistic. The outer surface of the metal wall is subjected to a uniform heat flux. The heat then passes through the metal wall and dispenses into the solid and liquid phases of the packed bed through the wall-sphere and the wall-fluid interfaces at the inner wall according to the physical mechanisms. Within the reactor, the heat transfer mechanism is separately considered in the near-wall region and the core region due to the intrinsic differences in the flow pattern. For each packing, different inflow angles are examined and exhibit different flow patterns and heat transfer performances. After the whole domain is hydrodynamically and thermally fully-developed, the local effective convection heat transfer coefficients can then be calculated. These coefficients reflect the realistic local convection either on the reactor wall or on the sphere-fluid interface. These convection heat transfer coefficients, along with the effective solid thermal conductivity through the contacting spheres obtained in our previous work, are implanted into a modified two-equation LTNE model. This modified LTNE model yields linear longitudinal fully-developed temperature distributions within the reactor having discrepancies in the temperature slopes less than ±10% from those by the pore-scale numerical simulations. In contrast, the conventional model even fails to reach linear distributions of the solid- and liquid-phase temperatures, which are expected for fully-developed packed-bed flows.

A Numerical Study on the Influence of Confining Walls on Drag and Heat Transfer Coefficients in Single‐Particle Lab‐Scale Reactors

Convective Heat Transfer Coefficient for a Rod-Like Particle in a Uniform Flow

A conjugated heat and mass transfer model to implement reaction in particle-resolved CFD simulations of catalytic fixed bed reactors

Numerical study on flow and heat transfer characteristics of low pressure gas in slip flow regime

Theoretical modeling of the drag reduction influenced by film boiling heat transfer on a spherical body

Numerical Simulation of Turbulent Structure and Particle Deposition in a Three-Dimensional Heat Transfer Pipe with Corrugation

Numerical Determination of Fluid‐to‐particle Mass and Heat Transfer Coefficients in Packed Bed Reactors

Numerical Simulation Of The Drag And Heat-Transfer Characteristics Around And Through A Porous Particle Based On The Lattice Boltzmann Method

Direct Numerical Simulation of Turbulent Flow and Heat Transfer in a Spatially Developing Turbulent Boundary Layer Laden with Particles

Effect of Stefan Flow on the Drag Force of Single Reactive Particle Surrounded by a Sea of Inert Particles

Drag Force and Heat Transfer Coefficient for Stefan Flow-Affected Non-Spherical Particles in Supercritical Water

Influence of Stefan Flow on the Drag Coefficient and Heat Transfer of a Spherical Particle in a Supercritical Water Cross Flow

Drag Coefficient Correction for Spherical and Nonspherical Particles Suspended in Square Microducts

Investigation of Drag Properties for Flow Through and Around Square Arrays of Cylinders at Low Reynolds Numbers

Numerical investigation of nanofluid particle migration and convective heat transfer in microchannels using an Eulerian–Lagrangian approach

Direct Numerical Simulation of Flow Past a Reactive/inert Mixed Particle Pair

Impact of Stefan Flow on the Interphase Scalar Transfer in Flow Past Random Particle Arrays

Natural convection flow in a fluid-saturated non-Darcy porous medium within a complex wavy wall reactor

Steady flow of non-Newtonian fluids: Momentum and heat transfer around a rectangular cylinder

Pore-scale numerical simulation and LTNE analysis for fully-developed forced convective heat transfer in packed beds of mono-sized rough spheres covering near-wall and core regions

Enhancing the Thermal Performance of Slender Packed Beds through Internal Heat Fins