Abstract:Shared mooring lines are a method to reduce the stationkeeping cost of floating offshore wind farms; however, their impacts on floating array dynamics are not yet well understood. This article presents advancements to floating wind farm simulation capabilities that allow the dynamic modeling of shared-mooring floating wind arrays—specifically, platform coupling through shared lines and proper phasing of wave loads across the array. These capabilities are demonstrated on a 10-turbine shared-mooring array featuring two staggered rows of wind turbines. A baseline array design with individually moored turbines is used as a basis for comparison. Coupled analysis using FAST.Farm shows that the shared-mooring design has smaller fluctuations in surge when compared to the baseline design. The mean and maximum platform offsets are highest in normal operating conditions, but the maximum mooring line tensions are highest in 50-year storm conditions. Power spectral density analysis of platform surge and sway motions shows that the shared mooring configuration does not introduce any significant inter-platform resonances. The tower-base bending moment statistics and the line tension damage equivalent loads indicate no consequential differences in turbine loading or mooring fatigue life. Anchor load analysis shows that the total required anchor capacity for the shared-mooring array is decreased by approximately 25% when shared anchors are used. Dynamic simulations of the shared mooring system under line failures show that remaining line tensions stay within bounds and that offsets are significantly smaller when compared to the baseline design. Overall, the results show that shared moorings do not introduce any dynamic response concerns in this floating wind array design.

Nonlinear modelling of shared mooring concepts for floating offshore wind turbines

Coupled loads analysis of a novel shared-mooring floating wind farm

Global analysis of floating offshore wind turbines with shared mooring system

Modeling of a Shared Mooring System for a Dual-Spar Configuration

Experimental comparison of a dual-spar floating wind farm with shared mooring against a single floating wind turbine under wave conditions

Numerical analysis of a tethered‐buoy mooring system for a prototype floating wind farm

Comparison study on mooring line models for hydrodynamic performances of floating offshore wind turbines

Shared mooring systems for offshore floating wind farms: A review

Experimental investigation of two shared mooring configurations for a dual-spar floating offshore wind farm in irregular waves

Effect of Mooring Parameters on Dynamic Responses of a Semi-Submersible Floating Offshore Wind Turbine

Integrated Numerical Investigation of a 15 MW Semi-Submersible Wind Turbine at Moderate Water Depth

Linearized modeling and optimization of shared mooring systems

Design and dynamic analysis of a co-existence solution between a semi-submersible offshore fish cage and a spar-type floating offshore wind turbine

Design and analysis of a ten-turbine floating wind farm with shared mooring lines

Coupled dynamic analysis on floating wind farms with shared mooring under complex conditions

Dynamic response analysis of a fully coupled aerodynamic-hydrodynamic-mooring-anchor floating offshore wind turbine

Cost-based mooring designs and a parametric study of bridles for a 15 MW spar-type floating offshore wind turbine

Mooring Analysis of a Dual-Spar Floating Wind Farm With a Shared Line

Design and costs benefits of shared anchors and shared mooring lines of floating wind turbines at farm level

Dynamics of two floating wind turbines with shared anchor and mooring lines

Floating Wind Turbine Model Test to Verify a moordyn Modification for Nonlinear Elastic Materials