Characteristics of In Situ Desorption Gas and their Relations to Shale Components: A Case Study of the Wufeng-Longmaxi Shales in Eastern Sichuan Basin, China
Taotao Cao,Mo Deng,Anyang Pan,Qingtao Wang,Qinggu Cao,Hu Liu,Xiao Juanyi
DOI: https://doi.org/10.2113/2023/8015444
2023-02-18
Lithosphere
Abstract:In situ desorption gas measurement can be used to evaluate shale gas potential, sweet spot prediction, and production strategy optimization. However, gas contents and carbon isotope compositions of in situ desorption gas and the relationship to reservoir properties and shale compositions are not systematically studied from the actual production situation. In this study, 63 core shales of Wufeng-Longmaxi formation from the YY1 well in the eastern Sichuan Basin were subjected to TOC (total organic carbon), solid bitumen reflectance (Rb), maceral fractions of kerogen analysis, and X-ray diffraction (XRD) analysis to obtain shale compositions, and 10 selected samples were conducted on low-pressure N2/CO2 (N2/CO2GA), mercury injection capillary pressure (MICP), and field emission scanning electron microscopy (FE-SEM) tests to acquire reservoir properties. Meanwhile, 60 samples were also subjected to in situ desorption tests to obtain shale gas content, and 5 selected samples were used to investigate variations in shale gas compositions and carbon isotopes during the desorption process. Results indicated that transient rates of shale gas during desorption process are significantly controlled by desorption time and temperature. In terms of in situ desorption process, total gas is divided into desorbed gas and lost gas. Desorbed gas is mainly comprised of CH4, N2, CO2, and C2H6, with desorption priorities of N2 > CH4 > CO2 ≈ C2H6, which are consistent with their adsorption capacities. The δ13CH4 values tend to become heavier during desorption process, varying from -37.7‰ to -16.5‰, with a maximum increase amplitude of 18.8‰, whereas the change of δ13C2H6 value, from -38.2‰ to -34.8‰, is minor. Desorbed gas shows carbon isotope reversals, due to that preferential desorption of 12C-CH4 during desorption process results in δ13C value less negative in CH4. The tested desorbed gas, lost gas, and total gas ranged 0.088 to 1.63 cm3/g, 0.15 to 3.64 cm3/g, and 0.23 to 5.20 cm3/g, respectively. Shale gas content, i.e., desorbed gas and lost gas, is controlled primarily by TOC content and organic matter (OM)-hosted nanometer-size pores. Clay mineral content is negatively correlated with shale gas content, due to that, clay mineral pores are more easily compacted during burial and occupied by water molecules. Compared with shale gas reservoirs in North America, the studied shale reservoir has high brittle mineral content and permeability, which is considered to have great potential of shale gas resource and to be the next commercial development zone in south China.
geochemistry & geophysics,geology