Modeling the Evolution of Grain Texture during Solidification of Laser-Based Powder Bed Fusion Manufactured Alloy 625 Using a Cellular Automata Finite Element Model

Carl Andersson,Andreas Lundbäck

DOI: https://doi.org/10.3390/met13111846

IF: 2.695

2023-11-04

Metals

Abstract:The grain texture of the as-printed material evolves during the laser-based powder bed fusion (PBF-LB) process. The resulting mechanical properties are dependent on the obtained grain texture and the properties vary depending on the chosen process parameters such as scan velocity and laser power. A coupled 2D Cellular Automata and Finite Element model (2D CA-FE) is developed to predict the evolution of the grain texture during solidification of the nickel-based superalloy 625 produced by PBF-LB. The FE model predicts the temperature history of the build, and the CA model makes predictions of nucleation and grain growth based on the temperature history. The 2D CA-FE model captures the solidification behavior observed in PBF-LB such as competitive grain growth plus equiaxed and columnar grain growth. Three different nucleation densities for heterogeneous nucleation were studied, 1 × 1011, 3 × 1011, and 5 × 1011. It was found that the nucleation density 3 × 1011 gave the best result compared to existing EBSD data in the literature. With the selected nucleation density, the aspect ratio and grain size distribution of the simulated grain texture also agrees well with the observed textures from EBSD in the literature.

materials science, multidisciplinary,metallurgy & metallurgical engineering