Abstract:Signal preprocessing and feature extraction are decisive factors in determining the frequency of bearing faults. The presence of noise interference in the status signal of rolling bearings often hampers accurate fault detection. Although there are various methods for preprocessing vibration signals in rolling bearings, they need further improvement in terms of enhancing fault feature expression and localizing fault frequency bands. This limitation significantly hinders the accuracy of fault frequency determination. In order to enhance the representation of fault information on the frequency spectrum, this study proposes a combined approach that incorporates sparse stacked autoencoder (SSAE), wavelet packet decomposition (WPD), and adaptive spectrum amplitude modulation (ASAM). The resulting method is referred to as SSAE-WPD-ASAM. Firstly, the bearing vibration signal is decomposed by wavelet packet according to the scale and frequency band of the signal. On this basis, the signal reconstruction is realized based on the wavelet packet coefficient and energy distribution in different frequency bands. Secondly, for the whole life cycle signal, the reconstructed signal is self-encoded by sparse stacked autoencoder to achieve dimensionality reduction of the reconstructed signal. Then, the spare reconstructed signal is subjected to adaptive spectrum amplitude modulation (ASAM). Finally, through envelope demodulation, peak detection of fault frequency and empirical fault frequency comparison, the specific fault types of rolling bearings are determined. The proposed method is verified by theoretical simulation and three groups of practical experiments. The results show that the proposed method has a significant improvement in diagnostic efficiency and accuracy compared with traditional diagnostic methods.

Bearing fault diagnosis of rail vehicles traction motor based on adaptive periodic segment matrix and singular value decomposition

Research of Singular Value Decomposition Based on Slip Matrix for Rolling Bearing Fault Diagnosis

Slip Hankel Matrix Series-Based Singular Value Decomposition and Its Application for Fault Feature Extraction

Fault Diagnosis Method for the Rolling Bearing of Railway Vehicle Based on Wavelet Packet Transform and BP Neural Network

A Method of Bearing Fault Feature Extraction Based on Improved Wavelet Packet and Hilbert Analysis

A Multi-sensor Approach Integrating Cyclostationary Analysis and Evidence Theory for Explainable Bearing Fault Diagnosis

Adaptive Spectrum Amplitude Modulation Method for Rolling Bearing Fault Frequency Determination

Short-time matrix series based singular value decomposition for rolling bearing fault diagnosis

Time-varying Singular Value Decomposition for Periodic Transient Identification in Bearing Fault Diagnosis

Periodical Sparse Low-Rank Matrix Estimation Algorithm for Fault Detection of Rolling Bearings

A Fast and Adaptive Varying-Scale Morphological Analysis Method for Rolling Element Bearing Fault Diagnosis

Rolling Bearing Fault Diagnosis Method Base on Periodic Sparse Attention and LSTM

Bearing Fault Diagnosis with Impulsive Noise Based on EMD and Cyclic Correntropy

Bearing Fault Diagnosis Using Singular Value Decomposition and Hidden Markov Modeling

Application of the AVMD-AIMCKD method to the enhancement of rolling bearing fault features

Rolling bearing fault diagnosis based on component screening singular value decomposition

A local transient feature extraction method via periodic low rank dynamic mode decomposition for bearing incipient fault diagnosis

Rolling Bearing Fault Diagnosis Method with Adaptive CEEMD and Cyclic Spectrum Coherence

A Time-Frequency Spectral Amplitude Modulation Method and Its Applications in Rolling Bearing Fault Diagnosis

Multi-fault Detection of Rolling Element Bearings under Harsh Working Condition Using IMF-based Adaptive Envelope Order Analysis.

Two-Step Adaptive Chirp Mode Decomposition for Time-Varying Bearing Fault Diagnosis