Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

Stabilized weighted reduced order methods for parametrized advection-dominated optimal control problems governed by partial differential equations with random inputs

Stabilized Weighted Reduced Order Methods for Parametrized Advection-Dominated Optimal Control Problems governed by Partial Differential Equations with Random Inputs

A Streamline Upwind Petrov-Galerkin Reduced Order Method for Advection-Dominated Partial Differential Equations Under Optimal Control

POD-based Reduced Order Optimal Control of Parabolic PDE Systems Via Diffusivity-Interior-boundary Actuation

Sequential Linear Quadratic Control of Bilinear Parabolic PDEs Based on POD Model Reduction

Boundary Stabilization of a Class of Reaction–advection–diffusion Systems Via a Gradient-Based Optimization Approach

POD-based reduced order methods for optimal control problems governed by parametric partial differential equation with varying boundary control

Residual-based stabilized reduced-order models of the transient convection-diffusion-reaction equation obtained through discrete and continuous projection

Stabilized POD Reduced Order Models for convection-dominated incompressible flows

Projection-based Reduced Order Modelling for Unsteady Parametrized Optimal Control Problems in 3D Cardiovascular Flows

An optimisation-based domain-decomposition reduced order model for the incompressible Navier-Stokes equations

Modeling Advection-Dominated Flows with Space-Local Reduced-Order Models

Space-time POD-Galerkin approach for parametric flow control

A Priori Error Analysis of Stabilized Mixed Finite Element Method for Reaction-Diffusion Optimal Control Problems

A POD approach to identify and control PDEs online through State Dependent Riccati equations

Model Reduction for Parametrized Optimal Control Problems in Environmental Marine Sciences and Engineering

Numerical analysis of a stabilized optimal control problem governed by a parabolic convection--diffusion equation

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

A reduced-order model for advection-dominated problems based on Radon-Cumulative-Distribution Transform

Local-global model reduction method for stochastic optimal control problems constrained by partial differential equations