Abstract:Since its beginnings, diffraction-limited ground-based adaptive optics (AO) imaging has been limited to wavelengths in the near IR ({\lambda} > 1 micron) and longer. Visible AO ({\lambda} < 1 micron) has proven to be difficult because shorter wavelengths require wavefront correction on very short spatial and temporal scales. The pupil must be sampled very finely, which requires dense actuator spacing and fine wavefront sampling with large dynamic range. In addition, atmospheric dispersion is much more significant in the visible than in the near-IR. Imaging over a broad visible band requires a very good Atmospheric Dispersion Corrector (ADC). Even with these technologies, our AO simulations using the CAOS code, combined with the optical and site parameters for the 6.5m Magellan telescope, demonstrate a large temporal variability of visible ({\lambda}=0.7 micron) Strehl on timescales of 50 ms. Over several hundred milliseconds, the visible Strehl can be as high at 50% and as low as 10%. Taking advantage of periods of high Strehl requires either the ability to read out the CCD very fast, thereby introducing significant amounts of read-noise, or the use of a fast asynchronous shutter that can block the low-Strehl light. Our Magellan VisAO camera will use an advanced ADC, a high-speed shutter, and our 585 actuator adaptive secondary to achieve broadband (0.5-1.0 micron) diffraction limited images on the 6.5m Magellan Clay telescope in Chile at Las Campanas Observatory. These will be the sharpest and deepest visible direct images taken to date with a resolution of 17 mas, a factor of 2.7 better than the diffraction limit of the Hubble Space Telescope.

First light simultaneous triple-channel optical observations of the OPTICAM system at the OAN-SPM

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

CAMO-S: A meteor-tracking spectrograph at the Canadian Automated Meteor Observatory

CCAT: Prime-Cam Optics Overview and Status Update

Optical design of the SOXS spectrograph for ESO NTT

The Navy Precision Optical Interferometer: Two years of development towards large-aperture observations

The Navy Precision Optical Interferometer: Large-Aperture Observations and Infrastructure Improvements

Vision: A Six-Telescope Fiber-Fed Visible Light Beam Combiner for the Navy Precision Optical Interferometer

Final design and development status of the acquisition and guiding system for SOXS

The mechanical design of SOXS for the NTT

The Simons Observatory: Deployment and current configuration of the Observatory Control System for SAT-MF1 and data access software systems

Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling

On-sky, real-time optical gain calibration on MagAO-X using incoherent speckles

The Simons Observatory: Overview of data acquisition, control, monitoring, and computer infrastructure

Final Alignment and Image Quality Test for the Acquisition and Guiding System of SOXS

SOXS NIR: Optomechanical integration and alignment, optical performance verification before full instrument assembly

The Simons Observatory: Deployment of the observatory control system and supporting infrastructure

Simons Observatory: Observatory Scheduler and Automated Data Processing

Enabling Technologies for Visible Adaptive Optics: The Magellan Adaptive Secondary VisAO Camera

Optical design and fabrication of a common-aperture multispectral imaging system for integrated deep space navigation and detection

The Simons Observatory: Development and Validation of the Large Aperture Telescope Receiver