Abstract:The shaft-seal water system (SSWS), as one of the critical systems for slurry pump protection, is widely used to provide shaft-seal water in cutter suction dredger. In general, the shaft-seal water obtained from gravity clarifier always accompanies with numerous sand with large size (> 10 mu m), resulting in the inevitable intense wear of components in the slurry pump, especially, the shaft sleeve and L-shaped rubber ring in back shaft seal. Even worse, the high temperature caused by unstable shaft rotation in the present of sand will aggravate the degree of this wear. To address the above thorny problems, in this study, water-sealed hydrocyclone (WSH) was un-precedentedly applied to optimize SSWS for high-efficiency sand centrifugal separation. The dimension and structure of WSH were designed and optimized before final industrial application. High-efficiency separation zone (the separation efficiency > 90%) with Re ranged of 1.88 x 10(4)-2.23 x 10(4) was also confirmed by introducing the optimal structure of the WSH (5 degrees of cone angle and 10 mm of bottom apex diameter). For the improved SSWS in the actual application, the D-v(50) of the shaft-seal water decreased from 38.0 mu m to 9.1 mu m, and the corresponding solid concentration declined from 0.51 g/L to 0.051 g/L. Furthermore, it was verified that the optimized SSWS could significantly reduce the wear of the shaft sleeve and L-shaped rubber ring, and extend the service life of L-shaped rubber ring, up to 4 months. This finding provided a new insight for the optimization of the SSWS for slurry pump, which could improve the operational stability and reliability of cutter suction dredger in the construction of marine infrastructure.

Design and Optimization of Slurry Conveying System for Small-sized Cutter Suction Dredger

Optimal design of slurry transportation system onvery large cutter suction dredger

Study on Impeller Configuration Strategy of Dredger Pump with Different Conveying Distance

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Application and Design of an Efficient Siphon Dewatering System for Debris Flow Mitigation: A Case Study of a Small Catchment in Zhejiang Province, China

Reform Design and Application for the Propulsion System of 4 500 M3 Trailing Suction Hopper Dredger

The Optimization of A Low Specific Speed Pipeline Pump

Optimal Scheduling on Dredging for River Network of West Hangzhou

Optimization Design of a Winch Suction Underwater Dredging Robot Using Orthogonal Experimental Design

Working Points Online Dynamic Optimization Method for Dredge Slurry Pipeline Transport System

Optimization of Shaft-Seal Water System of Cutter Suction Dredger Based on High-Efficiency Centrifugal Separation Technology

Research on the Design of Dredging Ship Special Mud Pump Gearbox

Energy-saving Mechanism and Control Strategy of Dredging Slurry Pipeline Transport System

Internal flow field analysis and optimization for dredging head of trailing suction hopper dredger

Mathematic modeling and CFD simulation of the sedimentation process in a TSHD

Three-dimensional Numerical Analysis on a New Design of Hydraulic Structure for Water Treatment

A new approach for determining compressibility and permeability characteristics of dredged slurries with high water content

Multi-objective Optimization of Parameters of Slurry Shield Slag Agitating and Discharging System

Design of Integrated System for Sediment Comprehensive Utilization in the Yellow River:Design of Sediment Pumping Device And Conveying System

Improving Consolidation of Dredged Slurry by Vacuum Preloading Using Prefabricated Vertical Drains (pvds) with Varying Filter Pore Sizes

Automatic Monitoring and Control of Cutter Suction Dredger