Abstract:This study proposes a direct synthesis-based two-degree-of-freedom (2-DOF) controller for various types of integrating processes with time delays. This 2-DOF controller includes a proportional-integral-derivative (PID) controller to enhance load disturbance rejection performance and a set-point filter to improve servo response performance. The main PID controller parameters are expressed as process model parameters and a single adjustment variable, while the set-point filter is composed of PID controller parameters with weighted factors. The adjustment variable is tuned to achieve an optimal balance between response performance and robustness, based on the maximum magnitude of the sensitivity function (Ms). Controller parameters for various Ms values and guidelines for setting these parameters are provided in a consistent formulaic form using a curve-fitting method. These parameter-setting formulas facilitate the accurate implementation of PID controllers with specified Ms values and allow the controller design to be extended to processes with larger dimensionless time delays for a given Ms value. Although a 2-DOF controller was proposed, the adjustment variable for setting the parameters of the main PID controller and the set-point filter was solely the desired time constant. The proposed method was applied to various integrating processes with time delays, and its performance was compared with existing methods reported in the literature, based on performance indices such as settling time, overshoot, integral of absolute error, total variation in input usage, and global performance index. Simulations were conducted using six examples of various integrating processes with time delays to verify the effectiveness and applicability of the proposed controller.

Two-Degrees-of-Freedom PID Control with Kalman Filter for Engraving Machine System

A De Based Pid Controller For Two Dimensional Overhead Crane

On PID Controllers Based on Simulated Annealing Algorithm

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Fuzzy PID controller for 2D differential geometric guidance and control problem

Application of PID Controller to 2D Differential Geometric Guidance and Control Problem

Application of Strong Tracking Filter in PID Controllers

Research on Quadrotor Control Based on Genetic Algorithm and Particle Swarm Optimization for PID Tuning and Fuzzy Control-Based Linear Active Disturbance Rejection Control

On Tracking and Antidisturbance Ability of PID Controllers

Two-degrees-of-freedom PID Controller Tuning Method

Hybrid PID Control with Iterative Learning Based on Disturbance Observer for Non-circular Part CNC Machining

Deterministic Learning-Based Neural PID Control for Nonlinear Robotic Systems

Reduced-order improved generalized proportional integral observer based tracking control for full-state constrained systems with multi-uncertainties

An Approach for Setting Parameters for Two-Degree-of-Freedom PID Controllers.

Optimization of PID Control Parameters for Belt Conveyor Tension Based on Improved Seeker Optimization Algorithm

Tracking performance of PID for nonlinear stochastic systems

Parameter Analysis of DDE-Based PID Controller Tuning Method

Automatic PID Tuning Via Differential Evolution for Quadrotor UAVs Trajectory Tracking

Online PID Tuning Strategy for Hydraulic Servo Control Systems via SAC-Based Deep Reinforcement Learning

An ADRC‐based PID Tuning Rule

DS based 2-DOF PID controller for various integrating processes with time delay