From 3D to 4D Bio-Printing - Design and Fabrication of a Biomimetic Scaffold with Oriented Porous Structure and Multi-Branch Network for Myocardial Tissue Engineering
Zhang Ting,Fang Yongcong,Xia Pingjie,Zhao Yaling,Lin Feng,Sun Wei
DOI: https://doi.org/10.3389/conf.fbioe.2016.01.00759
IF: 5.7
2016-01-01
Frontiers in Bioengineering and Biotechnology
Abstract:Event Abstract Back to Event From 3D to 4D bio-printing - design and fabrication of a biomimetic scaffold with oriented porous structure and multi-branch network for myocardial tissue engineering Ting Zhang1, 2, 3, Yongcong Fang1, 2, 3, Pingjie Xia1, 2, 3, Yaling Zhao1, 2, 3, Feng Lin1, 2, 3 and Wei Sun1, 2, 3, 4 1 Tsinghua University, Biomanufacturing Center, Department of Mechanical Engineering, China 2 Beijing, Biomanufacturing and Rapid Forming Technology Key Laboratory of Beijing, China 3 Ministry of Education, Key Laboratory for Advanced Materials Processing Technology, China 4 Drexel University, Department of Mechanical Engineering, United States Rapid-prototyping techniques, also named 3D printing, which are capable of fabricating individualized, complex 3D construct, have has been widely integrated with life science, biomaterials science for further biological applications. As native myocardium has very complex structures and special contractive functions, in an attempt to mimic native cardiac extracellular matrices (ECM), we designed and developed a platform for the fabrication of a kind of biomimetic myocardial scaffold with oriented porous structure and multi-branch network for engineering myocardial tissue in vitro. A multi-hydrogel materials system and a multi-hierarchy porous structure were designed for the scaffolds in order to mimic the morphological and structural characteristics of the cardiac ECM. A branched vascular core-structure was designed and fabricated by 3D printing of soluble and biocompatible materials. Then the oriented porous scaffold was fabricated by unidirectional thermal induced phase separation technology, while putting the core-structure within it. Then the core-structure was dissolved to generate vascular networks. The mathematical model of this 3D biomimetic scaffolds was established and computational fluid dynamic analysis was performed. The fourth dimension (4D), that is the time or environment dimension, has been considered as one of the key factors for further cell development and tissue formation. In this paper, we also designed a kind of multi-functional bioreactor with cell seeding, media perfusion, mechanical stimulation and electrical stimulation. The 3D scaffolds were seeding with cardiac myocytes and cultured in the bioreactor. Further biological evaluation was performed to evaluate how the biomimetic structure (3D) and the culture environment (4D) influenced cell growth and tissue reconstruction. The results indicated that the biomimetic scaffold with oriented porous structure and multi-branch network could promote viability and function of cardiomyocytes and the multi-functional bioreactor may further promote cardiac tissue formation. This may serve as a potential method for the fabrication of cardiac tissue and other vascularized tissues. Challenges, opportunities and future trend of the techniques will also be shared at the end of presentation. National Research Foundation of China (NSFC, No. 31200729) Keywords: Biomimetic, Bioprinting, 3D scaffold, MYOCARDIAL TISSUE Conference: 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016. Presentation Type: New Frontier Oral Topic: Biomaterials in printing Citation: Zhang T, Fang Y, Xia P, Zhao Y, Lin F and Sun W (2016). From 3D to 4D bio-printing - design and fabrication of a biomimetic scaffold with oriented porous structure and multi-branch network for myocardial tissue engineering. Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress. doi: 10.3389/conf.FBIOE.2016.01.00759 Copyright: The abstracts in this collection have not been subject to any Frontiers peer review or checks, and are not endorsed by Frontiers. They are made available through the Frontiers publishing platform as a service to conference organizers and presenters. The copyright in the individual abstracts is owned by the author of each abstract or his/her employer unless otherwise stated. Each abstract, as well as the collection of abstracts, are published under a Creative Commons CC-BY 4.0 (attribution) licence (https://creativecommons.org/licenses/by/4.0/) and may thus be reproduced, translated, adapted and be the subject of derivative works provided the authors and Frontiers are attributed. For Frontiers’ terms and conditions please see https://www.frontiersin.org/legal/terms-and-conditions. Received: 27 Mar 2016; Published Online: 30 Mar 2016. Login Required This action requires you to be registered with Frontiers and logged in. To register or login click here. Abstract Info Abstract The Authors in Frontiers Ting Zhang Yongcong Fang Pingjie Xia Yaling Zhao Feng Lin Wei Sun Google Ting Zhang Yongcong Fang Pingjie Xia Yaling Zhao Feng Lin Wei Sun Google Scholar Ting Zhang Yongcong Fang Pingjie Xia Yaling Zhao Feng Lin Wei Sun PubMed Ting Zhang Yongcong Fang Pingjie Xia Yaling Zhao Feng Lin Wei Sun Related Article in Frontiers Google Scholar PubMed Abstract Close Back to top Javascript is disabled. Please enable Javascript in your browser settings in order to see all the content on this page.