Abstract:In this work, ReaxFF molecular simulations were performed to study the pyrolysis behavior of chemical cross-linked natural rubber (NR) under non-isothermal and isothermal conditions. Three different sulfur vulcanized NR models were established and simulated to study the effect of inner sulfur structure on NR decomposition behavior and sulfur evolution in comparison with carbon cross-linked structure. To understand the NR decomposition with temperatures, the non-isothermal simulations were performed between 300 and 3800 K at a 50 K ps-1 heating rate. The results reveal that the decomposition process can be classified into four stages: 1) Structure adjustment; 2) Decomposition of the main carbon chains; 3) Secondary decomposition of heavy tar; and 4) Deep decomposition of light tar. Based on the results of non-isothermal pyrolysis, four different temperatures were selected for the isothermal simulations. Compared with carbon cross-linked NR, sulfur cross-linked structures facilitate the generation of C2H4 and C4H6 in the gas phase at low temperatures. At higher temperatures, more heavy tar is generated. Regarding the sulfur evolution, the sulfur-containing products mainly include H2S, thiophene, sulfide, and thiol. The distribution of sulfur-containing products with temperatures follows the similar pattern with the product distribution of main compounds. At higher temperatures, most sulfur exists in the form of thiophene compounds. In particular, the structure with single CS cross-links facilitates the generation of H2S at low temperatures. The results of this work provide insight into the sulfur transformation and pyrolysis behavior of vulcanized NR.

A fundamental study on Cyclic Tetrasulfide (CTS) as a sulfur donor and co-agent for rubber crosslinking

Vulcanization of styrene-butadiene rubber with the use of polysulfide sulfur-donors of controlled structure

Reactionbetween 1,3,5-Triisopropylbenzene and Elemental Sulfur Extending the Scope of Reagents in Inverse Vulcanization.

From Nanoscale to Macroscale Characterization of Sulfur-Modified Oxidized Carbon Nanotubes in Styrene Butadiene Rubber Compounds

Thermally Activable Bistetrazoles for Elastomers Crosslinking

Synthesis of Self-emulsified Sulfur Copolymer for Green Crosslinking of Rubber Latex

Effect of Sulfur Variation on the Vulcanizate Structure of Silica-Filled Styrene-Butadiene Rubber Compounds with a Sulfide-Silane Coupling Agent

Sulfur Radical Transfer and Coupling Reaction to Benzoxazine Groups: A New Reaction Route for Preparation of Polymeric Materials Using Elemental Sulfur as a Feedstock.

Rheology, morphology and phase behavior of SRS/sulfur modified asphalt based on experimental assessment and molecular dynamics

Dual functions of inverse vulcanized copolymers as both vulcanizator and interfacial modifier for improving the mechanical properties of silica reinforced rubber composites

"Re-Think" Sulfur Curing

Sulfur Diffusion Studies Imitating Recycled Ground-Rubber-Containing Compounds

Crosslinking Diene Rubbers By Using An Inverse Vulcanised Co-Polymer

Pyrolysis of vulcanized styrene-butadiene rubber via ReaxFF molecular dynamics simulation

A Combined Experimental and Molecular Dynamics Simulation Study on the Structures and Properties of Three Types of Styrene Butadiene Rubber

The Effect of Sulfur-Containing Silane Couping Agent on Mechanical and Dynamic Mechanical Properties of Natrual Rubber/Silica Composites

Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites

Influence of the silanes on the crosslink density and crosslink structure of silica-filled solution styrene butadiene rubber compounds

Study on the Curing Properties of SBR/La-GDTC/SiO2 Composites

A ReaxFF molecular dynamic study on pyrolysis behavior and sulfur transfer during pyrolysis of vulcanized natural rubber

Closed-loop Chemically Recyclable Covalent Adaptive Networks Derived from Elementary Sulfur