Abstract:The article contains the method of reconstruction of an emergency bridge structure by installing a new span construction without stopping its operation taking into account difficult engineering and geological conditions of construction site on the example of bridge which is situated at the state significance road M-21, near the village Pultovtsy of Vinnitsa region. Have been reviewed the technical condition of short and medium-length beam bridges, which span structures are a system of string-concrete prestressed bridge beams which are often operated in Ukraine. Have been described methods for increasing the capacity of bridges, which were used in Soviet times. Have been proved the systemic nature of defects and damages of prefabricated string-concrete spans and bridge structures after widening. Have been described the rational ways to strengthen such bridges. Have been proved the low efficiency of their reinforcement by standard methods due to the critical corrosive wear of the reinforcing prestressed fibers of the main beams. Have been chosen the optimal method by replacing the superstructure from the considered methods. Have been proposed a precast-monolithic structural scheme of the bridge with increased carrying capacity according to modern requirements.Have been developed an analytical and finite element model of the stress-strain state of reinforced precast-monolithic bridge structure, taking into account the difficult engineering and geological conditions of the construction site. Have been proven the needed to strengthen existing pile foundations. Have been developed a constructive scheme for strengthening the bridge supported by installing additional rows of piles. Have been planned to be erected the construction of a new superstructure and additional rows of piles to strengthen the foundations of bridge supports in two stages without stopping of bridge structures exploitation but only with partial blockage of traffic. Have been proposed an effective technological installing diagram for this.

The Incremental Launching Method with a Floating Support of Metal Combined Bridge Superstructures

Safety Control Research of Steel U Girder of Composite Bridge with Incremental Launching Construction

Evaluation of Long Multi-Span Steel U-Shaped Girder During Incremental Launching Construction

Ultimate Bearing Capacity of Steel U-Girders under Local Load in Incremental Launching Method

A Multi-Level Structural Assessment Strategy for Reinforced Concrete Bridge Deck Slabs

Justification of the development and application of express assessment programs for road bridges when heavy vehicles pass through them

Incremental Launching Construction of a Long Span Bridge with Continuous Steel Truss Girder and Flexible Arch

A Construction Technique of Incremental Launching for a Continuous Steel Truss Girder Bridge with Suspension Cable Stiffening Chords

Study on Incremental Launching Construction Technology of Long-Span Continuous Steel Truss Bridge

The Key Technology of Multi-span Steel Plate Bridge Incremental Launching Construction

Research on the key technology of TIED-arch bridge Incremental Launching Method Construction

METHOD FOR RECONSTRUCTION OF BEAM BRIDGES WITHOUT STOPPING THEIR OPERATION BY INSTALLING A NEW FENCE-MONOLITHIC SPAN

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Specific design problems related to bridges built using the incremental launching method

The Incremental Launching Construction Technology of Pontoon Pivot Conversion of Large-span Steel Arch Bridge

Walking-Type Bidirectional Incremental Launching and Mid-Span Closure Technology for Steel Box Girders with Long Cantilevers

ON A CFST TIED ARCH BRIDGE CONSTRUCTED BY INCREMENTAL LAUNCHING METHOD

Numerical Validation of the Incremental Launching Method of a Steel Bridge Through a Small-Scale Experimental Study

The New Incremental Launching Construction Technology of Jiubao Bridge Long-span Hybrid Arch-girder Structure

Research on the Overall and Local Mechanical Behaviors of Steel Box Girder Cable-Stayed Bridge via Incremental Launching Construction

Model Test on Incremental Launching Construction Method for JIUBAO Bridge in Hangzhou