Abstract:The synthesis and properties of RPUF‐P and RPUF‐PPOA. Two types of bio‐based RPUFs (RPUF‐P and RPUF‐PPOA) were prepared that contained ethanol‐modified polyols (Polyol‐E) and one contained an epoxidized polyol modified with phosphoric acid (Polyol‐P), and the other contained epoxidized polyol modified with phenylphosphonic acid (Polyol‐PPOA). The cell morphologies, thermal and mechanical properties, and flame retardancy characteristics of the RPUF, RPUF‐P, and RPUF‐PPOA were studied by scanning electron microscopy (SEM), thermogravimetric analysis(TGA), compression tests, limiting oxygen index (LOI), and cone calorimetry test (CCT). The porous structures revealed that the cell sizes of both RPUF‐P and RPUF‐PPOA increased first and then decreased, and the number of pores decreased first and then increased. Furthermore, the apparent density showed a similar trend of increasing before decreasing. The compressive strengths of the RPUF‐P and RPUF‐PPOA were higher than that of the RPUF, and the compressive strength of the RPUF‐P was better than that of the RPUF‐PPOA, because the hydroxyl value of the Polyol‐P was much higher than that of the Polyol‐PPOA. The crosslinking density of the RPUF‐P prepared by the PM‐200 reaction was much higher than that of the RPUF‐PPOA. The LOI values of the RPUF‐P4 and RPUF‐PPOA4 were 21.68 and 23.10, respectively. Furthermore, the value of the peak of the heat release rate (HRR) was reduced by 40.3% compared with that of pure RPUF. The total heat release (THR), smoke produce rate (SPR), and total smoke release (TSR) decreased with increased Polyol‐P and Polyol‐PPOA addition. The flame‐retardancy residues micrographs showed that the carbon layers generated from the combustion of the RPUF‐P4 and the RPUF‐PPOA4 lacked perforated structures and exhibited better densification than the pure RPUF. Based on the analysis and discussion, the flame retardancy of RPUF‐P and RPUF‐PPOA were improved mainly through a condensed and gas phases mechanism.

Preparation and Performance Study of a Novel Flame Retardant Polyurethane Phase Change Materials

Highly-efficient Reinforcement and Flame Retardancy of Rigid Polyurethane Foam with Phosphorus-Containing Additive and Nitrogen-Containing Compound

Aluminum Hypophosphite in Combination with Expandable Graphite As A Novel Flame Retardant System for Rigid Polyurethane Foams

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

The improvement of fire safety performance of flexible polyurethane foam by Highly-efficient P-N-S elemental hybrid synergistic flame retardant

Preparation of flame‐retardant rigid polyurethane foam with bio‐based phosphorus‐containing polyols and expandable graphite

Phosphorus and Nitrogen-Containing Polyols: Synergistic Effect on the Thermal Property and Flame Retardancy of Rigid Polyurethane Foam Composites

Highly Efficient Flame Retardancy and Fire Spread Behavior of Rigid Polyurethane Foams with extremely low content of Flame Retardant

Preparation and properties investigation of flame‐retardant rigid polyurethane foam composites based on alkylphosphate oligomer

Preparation and mechanism study of intrinsic hard segment flame‐retardant polyurethane foam

Thermal stability and combustion properties of polyurethane foam modified with manganese phytate and expandable graphite

Reactive flame-retardants prepared by transesterification between erythritol and dimethyl methyl phosphonate for rigid polyurethane foams

Preparation of a polyurethane‐coated expandable graphite and its flame retardant application in rigid polyurethane foams

Thermal and Combustion Properties of Biomass-Based Flame-Retardant Polyurethane Foams Containing P and N

Enhanced Fire Safety of Rigid Polyurethane Foam via Synergistic Effect of Phosphorus/Nitrogen Compounds and Expandable Graphite

Synthesis of Phosphorus–Sulfur-Containing Polyols for Intrinsic Flame Retardant Flexible Polyurethane Foams with Enhanced Mechanical Properties

Thermal Stability and Flame Retardancy of Rigid Polyurethane Foam Composites Filled with Phase-Change Microcapsule

Novel Glycerol-Based Polymerized Flame Retardants with Combined Phosphorus Structures for Preparation of High Performance Unsaturated Polyester Resin Composites

Fabrication of Fire Safe Rigid Polyurethane Foam with Reduced Release of CO and NOx and Excellent Physical Properties by Combining Phosphine Oxide-Containing Hyperbranched Polyol and Expandable Graphite

A reactive melamine-DOPO based flame retardant for superior thermal stability and flame retardancy in rigid polyurethane foam

Strategy for Constructing Phosphorus-Based Flame-Retarded Polyurethane Elastomers for Advanced Performance in Long-Term