Simultaneous saccharification of hemicellulose and cellulose of corncob in a one-pot system using catalysis of carbon based solid acid from lignosulfonate

Qiong Wang,Longjun Chang,Wen Wang,Yunzi Hu,Jun Yue,Zhongming Wang,Cuiyi Liang,Wei Qi

DOI: https://doi.org/10.1039/d3ra05283d

IF: 4.036

2023-01-01

RSC Advances

Abstract:Simultaneous saccharification of hemicellulose and cellulose of corncob in a one-pot system.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Kinetics of cellulose enzymatic hydrolysis and simultaneous saccharification and lactic acid fermentation process

Jun Luo,Liming Xia,Jianping Lin,Wenxu Wang,Peilin Cen

1998-01-01

Abstract:By using hydrolyzate of corn cob with dilute sulfuric acid processes (residue of xylose production) as raw material, the kinetics of cellulose enzymatic hydrolysis was studied. Because of similar optimal temperature, pH value and anaerobic condition, the simultaneous saccharification and lactic acid fermentation (SSLF) process was evaluated experimentally with compatible results. A mathematic model is suggested to simulate the SSLF process with good agreement.
Carbon-Based Solid Acid Pretreatment in Corncob Saccharification: Specific Xylose Production and Efficient Enzymatic Hydrolysis

Wei Qi,Chao He,Qiong Wang,Shuna Liu,Qiang Yu,Wen Wang,Noppol Leksawasdi,Chenguang Wang,Zhenhong Yuan

DOI: https://doi.org/10.1021/acssuschemeng.7b03959

IF: 8.4

2018-01-01

ACS Sustainable Chemistry & Engineering

Abstract:In this paper, we disclose a novel saccharification technology for lignocellulosic biomass. A new carbon based solid (C-SO3H) acid catalyst was first synthesized by a simple, one-step hydrothermal carbonization method using microcrystalline cellulose and sulfuric acid. The functional group, chemical composition and structure of the catalyst were characterized. After five reuses, the solid acid catalyst still showed a high catalytic activity for corncob pretreatment. Under optimal pretreatment conditions (140 degrees C, 6 h, 0.25 g of corncob, 0.25 g of catalyst, and 25 mL of water), xylose was directly released from corncob in a high yield (78.1%). Enzymatic hydrolysis of the pretreatment residue provided an h. The structure, morphology, and components of the corncob and residues were analyzed. The high xylose and glucose yields confirmed the high catalytic activity of the synthetic carbon-based solid acid, providing green and effective lignocellulose utilization.
Hydrolysis of Corncob Using A Modified Carbon-Based Solid Acid Catalyst

Yan Xu,Xun Li,Xucheng Zhang,Wen Wang,Shuna Liu,Wei Qi,Xinshu Zhuang,Yu Luo,Zhenhong Yuan

DOI: https://doi.org/10.15376/biores.11.4.10469-10482

2016-01-01

BioResources

Abstract:Lignocellulosic biomass is a very important renewable resource that can be used to produce biofuels and various platform chemicals. The conversion of biomass to reducing sugars is an important intermediate step that can impact the economic benefits of the process. Modified carbon-based solid acid is a novel catalyst used in the hydrolysis process of lignocellulosic materials. The catalyst material was prepared through the incomplete carbonization and subsequent sulfonation of a mixture of glucose and p-toluenesulfonic acid, followed by oxidation using 30% H2O2 to promote the acidity. The hydrolysis efficiency of the solid acid catalyst thus prepared was considerably increased. The effects of the carbonization temperature, time, and the glucose/p-toluene-sulfonic acid ratio on catalytic efficiency were investigated in this study. Under the appropriate preparation conditions, the catalyst could hydrolyze corncob to produce 78% xylose. The activity of the catalyst slightly declined after five cycles of application.
Kinetics of Simultaneous Saccharification and Lactic Acid Fermentation Processes.

J Luo,LM Xia,JP Lin,PL Cen

DOI: https://doi.org/10.1021/bp970100h

IF: 2.9

1997-01-01

Biotechnology Progress

Abstract:After pretreatment of corn cob by dilute acid, the lignocellulosic residue was used as raw materials for the simultaneous saccharification and lactic acid fermentation (SSLF). Because of the same optimal temperature and pH requirement as well as the anaerobic condition, the lactic acid fermentation is perfectly compatible with enzymatic hydrolysis of cellulosic materials. In the SSLF processes, the final concentration of lactic acid reached 33.97 g/L with a conversion ratio of 79% based on the consumed cellulose. A mathematical model is suggested to simulate the SSLF process with good agreement.
Preparation of reducing sugars from corncob by solid acid catalytic pretreatment combined with in situ enzymatic hydrolysis

Si Lu,Qiong Wang,Xiaoman Wang,Cuiyi Liang,Juan Fu,Zihan Xu,Zhongming Wang,Zhenhong Yuan,Jun Yue,Wei Qi

DOI: https://doi.org/10.1007/s13399-021-01943-7

IF: 4.05

2021-09-17

Biomass Conversion and Biorefinery

Abstract:The efficient conversion of hemicellulose and cellulose into reducing sugars remains as one major challenge for biorefinery of lignocellulosic biomass. In this work, saccharification of corncob in the aqueous phase was effectively realized via pretreatment by magnetic carbon-based solid acid (MMCSA) catalyst, combined with the subsequent in situ enzymatic hydrolysis (occurring in the same pretreatment system after separation of MMCSA). Through the combined two-step hydrolysis of corncob, the total sugar (xylose and glucose) yield of 90.03% was obtained, including a xylose yield of 86.99% and an enzymatic digestibility of pretreatment residue of 91.24% (cellulase loading of 20 FPU/g, 24 h). Compared with the traditional enzymatic hydrolysis of pretreated residue, the presented in situ enzymatic hydrolysis system can reach a comparable enzymatic digestibility in one-third reacting time with a half cellulase loading and save about 31% water consumption, which provides a more sustainable and low-cost method for the saccharification of lignocellulose.

energy & fuels,engineering, chemical
Production of 2, 3-butanediol from corncob by simultaneous saccharification and fermentation process

Xing Jiang,XIA Li-ming

DOI: https://doi.org/10.3969/j.issn.0253-2417.2013.02.016

2013-01-01

Abstract:Production of 2, 3-Butanediol from corncob was carried out by simultaneous saccharification and fermentation (SSF) process. The optimal SSF conditions were obtained as 100-120 g/L substrates were treated by 25 FPIU/g substrate cellulose, 15 IU/g substrate cellobiase and 300 IU/g substrate xylanase under pH 6.0 and 36°C environment. The concentration, productivity and conversion rate of 2, 3-butanediol were 46.02 g/L, 1.28 g/(L·h) and 0.424 g/g (based on cellulose and hemicellulose) respectively by SSF treatment for 36 h when the substrate concentration is 120 g/L.
Enzymatic Hydrolysis of Corncob and Ethanol Production from Cellulosic Hydrolysate

Ming Chen,Liming Xia,Peijian Xue

DOI: https://doi.org/10.1016/j.ibiod.2006.07.011

2007-01-01

Abstract:Enzymatic hydrolysis of corncob and ethanol fermentation from cellulosic hydrolysate were investigated. After corncob was pretreated by 1% H2SO4 at 108°C for 3h, the cellulosic residue was hydrolyzed by cellulase from Trichoderma reesei ZU-02 and the hydrolysis yield was 67.5%. Poor cellobiase activity in T. reesei cellulase restricted the conversion of cellobiose to glucose, and the accumulation of cellobiose caused severe feedback inhibition to the activities of β-1,4-endoglucanase and β-1,4-exoglucanase in cellulase system. Supplementing cellobiase from Aspergillus niger ZU-07 greatly reduced the inhibitory effect caused by cellobiose, and the hydrolysis yield was improved to 83.9% with enhanced cellobiase activity of 6.5CBUg−1 substrate. Fed-batch hydrolysis process was started with a batch hydrolysis containing 100gl−1 substrate, with cellulosic residue added at 6 and 12h twice to get a final substrate concentration of 200gl−1. After 60h of reaction, the reducing sugar concentration reached 116.3gl−1 with a hydrolysis yield of 79.5%. Further fermentation of cellulosic hydrolysate containing 95.3gl−1 glucose was performed using Saccharomyces cerevisiae 316, and 45.7gl−1 ethanol was obtained within 18h. The research results are meaningful in fuel ethanol production from agricultural residue instead of grain starch.
Lactic Acid Production from Cellulosic Material by Synergetic Hydrolysis and Fermentation.

Xueliang Shen,Liming Xia

DOI: https://doi.org/10.1385/abab:133:3:251

2006-01-01

Applied Biochemistry and Biotechnology

Abstract:The hydrolysis process on corncob residue was catalyzed synergetically by the cellulase from Trichoderma reesei and the immobilized cellobiase. The feedback inhibition to cellulase reaction caused by the accumulation of cellobiose was eliminated efficiently. The hydrolysis yield of corncob residue was 82.5%, and the percentage of glucose in the reducing sugar reached 88.2%. The glucose in the cellulosic hydrolysate could be converted into lactic acid effectively by the immobilized cells of Lactobacillus delbrueckii. When the enzymatic hydrolysis of cellulose and the fermentation of lactic acid were coupled together, no glucose was accumulated in the reaction system, and the feedback inhibition caused by glucose was also eliminated. Under the batch process of synergetic hydrolysis and lactic acid fermentation with 100 g/L of cellulosic substrate, the conversion efficiency of lactic acid from cellulose and the productivity of lactic acid reached 92.4% and 0.938 g/(L·h), respectively. By using a fed-batch technique, the total concentration of cellulosic substrate and lactic acid in the synergetic process increased to 200 and 107.5 g/L, respectively, whereas the dosage of cellulase reduced from 20 to 15 IU/g of substrate in the batch process. The results of the bioconversion of renewable cellulosic resources were significant.
Efficient high-solids enzymatic hydrolysis of corncobs by an acidic pretreatment and a fed-batch feeding mode

Xue Cai,Chang-Hui Hu,Jing Wang,Xu-Hao Zeng,Jia-Xing Luo,Mian Li,Zhi-Qiang Liu,Yu-Guo Zheng

DOI: https://doi.org/10.1016/j.biortech.2021.124768

IF: 11.4

2021-04-01

Bioresource Technology

Abstract:Corncob is an abundant and renewable resource that could be enzymatically hydrolyzed to fermentable sugar. A major impediment in corncob utilization is the low hydrolysis efficiency at high-solids content. This study attempted different pretreatment methods and fed-batch modes to achieve a 25% solids content hydrolysis with high yields. Natural corncobs were compared with acid-treated and acid-alkali-treated corncobs in terms of kinetics parameters, conversion rate and glucose titer. By feeding in batches, a "low amount and high frequency" mode (10%-3%-3%-3%-3%-3%, every 5 h) was confirmed to be optimal for a 25% high-solids hydrolysis system with a cellulase loading of 12 mg/g (7.3 FPU/g), resulted with an 84.4% glucose yield at 96 h. Our results demonstrated that combination of both optimized pretreatment method and fed-batch mode were a favored process model for high-solids hydrolysis of lignocellulose, boosting cellulose hydrolysis efficiency and sugar yields on an industrial scale.

energy & fuels,biotechnology & applied microbiology,agricultural engineering
Simultaneous Saccharification and Fermentation of Corncobs with Genetically Modified Saccharomyces Cerevisiae and Characterization of Their Microstructure During Hydrolysis

Hui-Ting Song,Shi-Hui Liu,Yuan Gao,Yi-Min Yang,Wen-Jing Xiao,Wu-Cheng Xia,Zi-Lu Liu,Rong Li,Xiang-Dong Ma,Zheng-Bing Jiang

DOI: https://doi.org/10.1080/21655979.2016.1178424

2016-01-01

Bioengineered

Abstract:ABSTRACT Cellulose is an abundant natural polysaccharide that is universally distributed. It can be extracted from corncobs, which are inexpensive, easily accessible, renewable, and environmentally friendly. A common strategy for effectively utilizing cellulose is efficient heterogeneous expression of cellulase genes in Saccharomyces cerevisiae. However, the improvement of cellulose utilization is a relevant issue. Based on our previous findings, we constructed an integrated secretion expression vector, pHBM368-pgk, containing a constitutive promoter sequence. Three genetically modified S. cerevisiae strains containing heterologous β-glucosidase, exoglucanase, and endoglucanase genes were constructed. The results of a 1-L bioreactor fermentation process revealed that the mixed recombinant S. cerevisiae could efficiently carry out simultaneous saccharification and fermentation (SSF) by using corncobs as the sole carbon source. The ethanol concentration reached 6.37 g/L after 96 hours of fermentation, which was about 3 times higher than that produced by genetically modified S. cerevisiae with the inducible promoter sequence. To investigate the microstructure characteristics of hydrolyzed corncobs during the fermentation process, corncob residues were detected by using a scanning electron microscope. This study provides a feasible method to improve the effect of SSF using corncobs as the sole carbon source.
GLUCOSE-DERIVED CARBONACEOUS SOLID ACID CATALYST FOR CELLOOLIGOSACCHARIDES HYDROLYSIS IN AN AQUEOUS REACTION SYSTEM

Wan-Yu Liu,Wei Qi,Shu-Na Liu,Qiong Wang,Jin-Song Zhou,Zhen-Hong Yuan,Xin-Shu Zhuang

2017-01-01

Cellulose Chemistry and Technology

Abstract:An amorphous carbon based catalyst was prepared by carbonation and sulfonation of several typical biomass materials, including glucose, microcrystalline cellulose, sugarcane bagasse, eucalyptus, switchgrass and microalgae. Preliminary experimental results on cellobiose hydrolysis indicated that the catalyst prepared from glucose exhibited the highest catalytic activity. Thus, methods, including SEM, XRD, FT-IR, NH3-TPD and elemental analysis, were employed to characterize the catalyst before and after sulfonation. Compared with other conventional solid acid catalysts, the catalyst bearing -SO3H, -COOH, and -OH groups exhibited remarkable activity in the hydrolysis of beta-1,4-glycosidic bonds and no other by-reactions were detected in further hydrolysis experiments. After the hydrolysis reaction, the solid acid catalyst could be readily separated from the saccharide solution for reuse without any significant loss of activity.
High concentration ethanol production from corncob residues by fed-batch strategy.

Kai Liu,Xiaohui Lin,Jun Yue,Xuezhi Li,Xu Fang,Mingtian Zhu,Jianqiang Lin,Yinbo Qu,Lin Xiao

DOI: https://doi.org/10.1016/j.biortech.2009.11.013

IF: 11.4

2010-01-01

Bioresource Technology

Abstract:Ethanol production from corncob residues (CCR) pretreated by different methods was studied. The structure features of these CCR were analyzed by Fourier transform-infrared spectrum (FT-IR), X-ray diffraction (XRD), and field emission scanning electron microscope (SEM). Simultaneous saccharification and fermentation (SSF) was performed by adding crude cellulase preparations from Penicillium decumbens JUA10-1 at 30°C. The results suggested that different pretreatments resulted in different composition and structure of residues; these changes had a significant influence on ethanol productivity and concentration. The fed-batch method was combined with SSF to enhance ethanol concentration further and reduce enzyme dosage. Moreover, the absorption and desorption phenomena of cellobiohydrolase I (CBH I) (70kDa) were observed to be related to lignin contents in residues. These results demonstrated that despite the application of low enzyme dosage, high concentration ethanol could be produced from pretreated corncobs by combining fed-batch method with SSF.
Preparation of Core-Shell Structure Magnetic Carbon-Based Solid Acid and its Catalytic Performance on Hemicellulose in Corncobs

Xucheng Zhang,Xuesong Tan,Yan Xu,Wen Wang,Longlong Ma,Wei Qi

DOI: https://doi.org/10.15376/biores.11.4.10014-10029

2016-01-01

BioResources

Abstract:Solid acid catalysts show good catalytic depolymerization behavior for lignocellulose. A stable core-shell structured magnetic solid acid catalyst (MSAC), Fe3O4/C-SO3H, was prepared from glucose, concentrated sulfuric acid, and modified magnetic particles of Fe3O4, which was used as the core. The effects of the carbonization and sulfonation processes on the activity of the catalyst were investigated. The results showed that preparation conditions had great influence on the quantity of the acidic groups (sulfonic, carboxyl, and hydroxyl groups) and the stability of magnetic catalysts. The best preparation conditions for MSAC were 3 h of carbonization time, 450 degrees C as the carbonization temperature, 9 h of sulfonation time, and 90 degrees C as the sulfonation temperature. Its surface topography, functional group, chemical composition, and magnetic properties were characterized by analysis instrument. Furthermore, the catalyst was stably dispersed in the reaction system, quickly separated from the reaction system using an external field, and reused many times; 44.3% of xylose yield was obtained at 160 degrees C for 16 h. The catalyst was used repeatedly more than 3 times, and the recovery over 89%. The depolymerization of corncobs was achieved by magnetic catalyst, representing the depolymerization characteristics of real lignocellulose. This data can be used as a reference for the subsequent use of biomass resource.
A Combined Process for Production of Fumaric Acid and Xylooligosaccharides from Corncob

Xin Li,Lei Yang,Ximei Gu,Chenhuan Lai,Caoxing Huang,Qiang Yong

DOI: https://doi.org/10.15376/biores.13.1.399-411

2018-01-01

BioResources

Abstract:Production of fumaric acid and xylooligosaccharides from corncob was investigated using a combined process. Corncob was fractionated into a cellulose-rich fraction and a hemicellulose-rich fraction by an alkali pretreatment. The cellulose-rich fraction was converted into fumaric acid by Rhizopus oryzae in fed-batch simultaneous saccharification and fermentation (SSF). Maximal fumaric acid concentration reached 35.22 g/L at a final 15% (w/v) solid loading in the fed-batch SSF. The hemicellulose-rich fraction was converted into xylooligosaccharides (XOSs) by endo-beta-1,4-xylanase. The yield of XOSs was 62.35% after 24 h of xylanase hydrolysis. Xylobiose, xylotriose, and xylotetraose were the three major components in the XOSs. A mass balance analysis demonstrated that 100.6 g of fumaric acid and 148.1 g of XOSs were produced from 1000 g of dry corncob matter. The production of fumaric acid and XOSs by the combined process could make the utilization of corncob more efficient and more promising.
Saccharification of sugarcane bagasse by magnetic carbon-based solid acid pretreatment and enzymatic hydrolysis

Si Lu,Qiong Wang,Zheng Liang,Wen Wang,Cuiyi Liang,Zhongming Wang,Zhenhong Yuan,Ping Lan,Wei Qi

DOI: https://doi.org/10.1016/j.indcrop.2020.113159

IF: 6.449

2021-01-01

Industrial Crops and Products

Abstract:•A sustainable and green two-step hydrolysis of sugarcane bagasse was established.•Hemillulose was directly converted into xylose catalyzed by homemade solid acid.•The enzymatic digestibility of pretreated sugarcane bagasse was increased by 50 %.
Selective conversion of corncob hemicellulose to xylose via hydrothermal treatment with Fe2(SO4)3 and NaCl

Dong Li,Yong Sun,Ruiling Li,Tianjie Ao,Xiaofeng Liu,Yiping Luo

DOI: https://doi.org/10.1007/s13399-020-01170-6

IF: 4.05

2021-01-06

Biomass Conversion and Biorefinery

Abstract:A new catalyst (Fe2(SO4)3-NaCl) was employed for the selective conversion of corncob hemicellulose to xylose via hydrothermal treatment. The optimal conditions included Fe2(SO4)3-NaCl treatment for 2 h at 140 °C to achieve the selective conversion of hemicellulose (92.4 wt%) and a xylose yield of 106.8 wt%, which is based on the hemicellulose content in corncobs. These conditions led to a cellulose and lignin dissolution of 7.9 and 21.2 wt%, respectively. Fe2(SO4)3 was found to play an important role, rather than NaCl, in the disruption of interactions among the three major components, while the conversion of lignin and cellulose was inhibited by NaCl and Fe2(SO4)3, respectively. The co-addition of Fe2(SO4)3 and NaCl promoted the selective dissolution of hemicellulose, leaving most of the cellulose and lignin unreacted in the solid residue. Additionally, Fe2(SO4)3 inhibited the formation of formic and acetic acids. A second hydrothermal treatment on the hemicellulose-free residue with the same catalytic system at 140 °C for 2 h resulted in 42.2 wt% cellulose conversion and a fructose yield of 79.7 wt% based on converted cellulose. Therefore, a potential route for the comprehensive utilization of corncobs is proposed.

energy & fuels,engineering, chemical
Simultaneously Saccharification and Lactic Acid Fermentation for Using Cellulosic Material As Raw Material in a Coupling Bioreactor

SHEN Xue-liang,XIA Li-ming

DOI: https://doi.org/10.3321/j.issn:1003-9015.2005.03.013

2005-01-01

Abstract:The enzymatic saccharification of cellulose and the fermentation of lactic acid were carried out simultaneously in a coupling bioreactor. The glucose from cellulose hydrolysis could be converted to lactic acid effectively by the immobilized Lactobacillus delbrueckii cells, and the yield and productivity of lactic acid were 70.3% and 0.713 g?(L?h)?1, respectively. The hydrolysis process of cellulose could be enhanced by adding cellobiase to the cellulase system of Trichoderma reesei. When an immobilized cellobiase column was joined into the coupling bioreactor, the accumulation of cellobiose disappeares and its feed back inhibition to the cellulase reaction is completely eliminated. The yield and productivity of lactic acid may be improved to 90.6% and 0.986 g?(L?h)?1, respectively. The bioreactor is quite stable, and the average lactic acid yield of repeated 10 batches is 89.6%. Under fed-batch process the final concentration of cellulosic substrate increases to 200 g?L?1, and the lactic acid concentration and productivity reach 105.2 g?L?1 and 1.315 g?(L?h)?1, respectively. The research results are helpful to advance the bioconversion of renewable resource.
Efficient Corncob Biorefinery for Ethanol Initiated by a Novel Pretreatment of Densifying Lignocellulosic Biomass with Sulfuric Acid

Shuangmei Liu,Yang Yu,Zhaoxian Xu,Sitong Chen,Guannan Shen,Xinchuan Yuan,Qiufeng Deng,Wenyuan Shen,Shizhong Yang,Chengcheng Zhang,Xiangxue Chen,Mingjie Jin

DOI: https://doi.org/10.3390/fermentation8110661

2022-01-01

Abstract:Corncob is a potential feedstock for biorefineries to produce cellulosic ethanol and other chemicals. Densifying lignocellulosic biomass with chemicals followed by autoclave (DLCA) has been confirmed an efficient and economical pretreatment method, and it was applied in the present work for conversion of corncob to bioethanol. The dosage of sulfuric acid, solid loading of biomass, and autoclave time for pretreatment were investigated. Enzymatic hydrolysis at 25-35% solids loadings resulted in 91-97% sugar conversions. Fermentation of the resulted hydrolysates went well with the highest ethanol titer reaching 75.71 g/L at 35% solid loading. Simultaneous saccharification and co-fermentation was applied to further improve xylose consumption at high solids loadings and the ethanol titer was enhanced to 82.0 g/L at 35% solid loading with an ethanol yield of 21.67 kg/100 kg corncob. This study demonstrated DLCA provided a highly digestible and highly fermentable corncob for biorefinery.
One step catalytic conversion of cellulose to sustainable chemicals utilizing cooperative ionic liquid pairs

Jinxing Long,Bin Guo,Xuehui Li,Yanbin Jiang,Furong Wang,Shikchi Tsang,Lefu Wang,Kai Man Kerry Yu

DOI: https://doi.org/10.1039/c1gc15597k

IF: 9.8

2011-01-01

Green Chemistry

Abstract:A 100% conversion of cellulose to industrially useful chemicals is, for the first time, achieved in a single pot reaction by the use of cooperative ionic liquid pairs for combined dissolution and catalytic degradation of cellulose, which overcomes the long intrinsic phase problem in the conversion of biomass to chemicals.
Catalytic Hydrothermal Pretreatment of Corncob into Xylose and Furfural Via Solid Acid Catalyst.

Huiling Li,Aojie Deng,Junli Ren,Changyu Liu,Qi Lu,Linjie Zhong,Feng Peng,Runcang Sun

DOI: https://doi.org/10.1016/j.biortech.2014.02.059

IF: 11.4

2014-01-01

Bioresource Technology

Abstract:Selectively catalytic hydrothermal pretreatment of corncob into xylose and furfural has been developed in this work using solid acid catalyst (SO42-/TiO2-ZrO2/La3+). The effects of corncob-to-water ratio, reaction temperature and residence time on the performance of catalytic hydrothermal pretreatment were investigated. Results showed that the solid residues contained mainly lignin and cellulose, which was indicative of the efficient removal of hemicelluloses from corncob by hydrothermal method. The prepared catalyst with high thermal stability and strong acid sites originated from the acid functional groups was confirmed to contribute to the hydrolysis of polysaccharides into monosaccharides followed by dehydration into furfural. Highest furfural yield (6.18 g/100 g) could be obtained at 180 degrees C for 120 min with 6.80 g/100 g xylose yield when the corncob/water ratio of was 10:100. Therefore, selectively catalytic hydrothermal pretreatment of lignocellulosic biomass into important platform chemicals by solid acids is considered to be a potential treatment for biodiesel and chemical production. (C) 2014 Elsevier Ltd. All rights reserved.

Simultaneous saccharification of hemicellulose and cellulose of corncob in a one-pot system using catalysis of carbon based solid acid from lignosulfonate

Kinetics of cellulose enzymatic hydrolysis and simultaneous saccharification and lactic acid fermentation process

Carbon-Based Solid Acid Pretreatment in Corncob Saccharification: Specific Xylose Production and Efficient Enzymatic Hydrolysis

Hydrolysis of Corncob Using A Modified Carbon-Based Solid Acid Catalyst

Kinetics of Simultaneous Saccharification and Lactic Acid Fermentation Processes.

Preparation of reducing sugars from corncob by solid acid catalytic pretreatment combined with in situ enzymatic hydrolysis

Production of 2, 3-butanediol from corncob by simultaneous saccharification and fermentation process

Enzymatic Hydrolysis of Corncob and Ethanol Production from Cellulosic Hydrolysate

Lactic Acid Production from Cellulosic Material by Synergetic Hydrolysis and Fermentation.

Efficient high-solids enzymatic hydrolysis of corncobs by an acidic pretreatment and a fed-batch feeding mode

Simultaneous Saccharification and Fermentation of Corncobs with Genetically Modified Saccharomyces Cerevisiae and Characterization of Their Microstructure During Hydrolysis

GLUCOSE-DERIVED CARBONACEOUS SOLID ACID CATALYST FOR CELLOOLIGOSACCHARIDES HYDROLYSIS IN AN AQUEOUS REACTION SYSTEM

High concentration ethanol production from corncob residues by fed-batch strategy.

Preparation of Core-Shell Structure Magnetic Carbon-Based Solid Acid and its Catalytic Performance on Hemicellulose in Corncobs

A Combined Process for Production of Fumaric Acid and Xylooligosaccharides from Corncob

Saccharification of sugarcane bagasse by magnetic carbon-based solid acid pretreatment and enzymatic hydrolysis

Selective conversion of corncob hemicellulose to xylose via hydrothermal treatment with Fe2(SO4)3 and NaCl

Simultaneously Saccharification and Lactic Acid Fermentation for Using Cellulosic Material As Raw Material in a Coupling Bioreactor

Efficient Corncob Biorefinery for Ethanol Initiated by a Novel Pretreatment of Densifying Lignocellulosic Biomass with Sulfuric Acid

One step catalytic conversion of cellulose to sustainable chemicals utilizing cooperative ionic liquid pairs

Catalytic Hydrothermal Pretreatment of Corncob into Xylose and Furfural Via Solid Acid Catalyst.