Abstract:Abstract The paper describes the results of the first multistage hydraulic fracturing operations in Russia on the Caspian Sea shelf in the gas condensate and oil deposits of the Aptian formation of V. Filanovsky field. In addition to the small productive formation depth, long horizontal sections with a complex trajectory and high collapse gradients due to large zenith angles when passing the Albian and Aptian deposits of poorly consolidated sandstones are an additional challenge for choosing a multistage hydraulic fracturing assembly. The above features require the use of modern sand control screens with enhanced frac sleeves. A design was developed which includes frac sleeves and sand control screens that can withstand multiple cycles of hydraulic impact during hydraulic fracturing, as well as many opening/closing cycles. A seawater-based frac fluid system was applied. The frac fleet was located on a pontoon, the coiled tubing – on a platform. For the first time in Russia, a 2-5/8 inch coiled tubing with a complex-type friction reducing system was used to switch coupling/sleeves in conditions of very long horizontal sections, complex trajectories, and high friction coefficients. The minimum distances between the screen's sliding sleeves and frac sleeves did not prevent from performing manipulations in complex environment. For well cleaning, the frac assemblies of reverse rotary-pulse and rotary-directional types were used. At the first stage of the project, the development of an optimal method of well completion was successfully implemented. Due to the close interaction of the operating company, service company, and science & engineering team of the operator, for the first time in Russia the design of downhole equipment with the use of advanced technologies of sand control screens, frac sleeves was presented. This solution has proved its effectiveness – the downhole equipment has retained its operational properties after a long period of well operation and further in the process of hydraulic fracturing. At the second stage of the project, 32 MSHF operations were performed at four wells. To reduce nonproductive time and operational risks, a satellite communication complex was additionally deployed on the pontoon to join the engineering centers of Astrakhan, Moscow, and Houston. After finishing the well development, the design indicators for formation fluid rates were achieved, which proved the effectiveness of the stimulation of the field's target objects – this opens great prospects for further development of low-permeability reservoirs at offshore sites in the Caspian Sea. The successful project implementation and the achievement of the design values of oil flow rates has expanded the possibilities of commercial operation of the low-permeable Aptian formation, complicated by the presence of a gas cap and underlying water. A solution was presented for working in extended horizontal well sections with 2-5/8 inch coiled tubing together with a complex-type mechanical friction reducing system. The economic effect was achieved when solving tasks of manipulating mechanical screen couplings and frac port sleeves without the involvement of downhole tractors. The use of new solutions in the completion assembly made it possible to eliminate additional sand ingress problems.

Specifics of the research program for offshore fields: The case of the Piltun-Astokh oil and gas condensate field of the Sakhalin II project

Environmental status of continental shelf in the Pechora Sea: analysis and recommendations

Perspectives for Asian countries for entering into Oil and Gas assets of Sakhalin island Shelf and Arctic shelf of Russia

First Multistage Hydraulic Fracturing in Russian Offshore: Integrated Approach to Completion and Stimulation of Apt Deposits of V.Filanovsky Field

Oil and Gas Potential of the West Kamchatka Coast and Its Relation to the Structural and Tectonic Setting of the Sea of Okhotsk Region Based on Geophysical Data

Basic Principles (Indicators) for Assessing the Technical and Economic Potential of Developing Arctic Offshore Oil and Gas Fields

Application of the synthetic aperture radar for monitoring activity and environmental parameters during oil-platform installation

Forecast of oil and gas reservoirs of the Sea of Okhotsk based on interpretation processing of seismic material

Water Legal Protection During Offshore Oil Production in Polar Conditions (Experience of Norway and Russia)

Methodological Tools for the Implementation of Oil and Gas Projects on the arctic and Continental Shelf

Theoretical and methodological approaches to identifying deep accumulations of oil and gas in oil and gas basins of the Russian Federation

Collaborative and Multidiscipline Field Development Planning – A Caspian Case Study

On Geodynamic Stability and Safety of the Facilities for the Development of Deposits of the Arctic Coastal Shelf

Geology, Oil and Gas Potential, Hydrocarbon Resources and Directions of Geological Exploration in the Northeastern Continental Margin of the Siberian Platform (Anabar–Khatanga and Lena–Anabar OGA)

Strategic management challenges in the development of Arctic oil and gas fields

Exploring technological advancements in oilfield services: Prospects for the development of Arctic oil and gas fields

On Development Prospects of the Energy Industry in the Russian Far North

Geochemistry Of Oils And Gases From The Verkhnechonskoye Field, East Siberian Basin: Application Of Analytical Results To Reservoir Characterisation

Increasing the efficiency and environmental safety of the development of oil and gas resources in the Arctic and Subarctic zones of the Earth in a changing climate

Prospectivity of Pliocene-Miocene deposits of the Khasilat field of the Absheron oil and gas bearing region according to surface and well seismic data

MATERIALS AND ANTICORROSION DEVELOPMENTS IN OFFSHORE AND SUBSEA OIL AND GAS PRODUCTION