Abstract:Water polluted with microorganisms and pathogens is one of the most significant hazards to public health. Potential microorganisms unsafe to human health can be destroyed through effective disinfection. To stop the re-growth of microorganisms, it is also advisable to take care of the residual disinfectant in the water distribution networks. The most frequently used cleanser material is chlorine. When the chlorine dosage is too low, there will be a deficiency of enough residues at the end of the water network system, leading to re-growth of microorganisms. Addition of an excessive amount of chlorine will lead to corrosion of the pipeline network and also the development of disinfection by-products (DBPs) including carcinogens. Thus, to determine the best rate of chlorine dosage, it is essential to model the system to forecast chlorine decay within the network. In this research study, two major modeling and optimization strategies were employed to assess the optimum dosage of chlorine for municipal water disinfection and also to predict residual chlorine at any predetermined node within the water distribution network. Artificial neural network (ANN) modeling techniques were used to forecast chlorine concentrations in different nodes in the urban water distribution system in Muscat, the capital of the Sultanate of Oman. One-year dataset from one of the distribution system was used for conducting network modeling in this study. The input factors to RSM model considered were pH, chlorine dosage and time. Response variables for RSM model were fixed as total organic carbon (TOC), Biological oxygen demand (BOD) and residual chlorine An Artificial neural network (ANN) model for residual chlorine was created with pH, inlet-concentration of chlorine and initial temperature as input parameters and residual chlorine in the piping network as an output parameter. The ANN model created using these data can be employed to forecast the residual chlorine value in the urban water network at any given specific location. The results from this study utilizing the uniqueness of an ANN model to predict residual chlorine and water quality parameters have the potential to detect complex, higher-order behavior between input and output parameters exist in urban water distribution system.

Optimization of chlorine consumption in water distribution networks by using the new ant colony optimization (ACOR) algorithm

Ant Algorithm Based Optimization Of Neural Network Model Of Water Distribution System

Multi-objective Optimization of Water Quality Performance Considering THM in Water Distribution Systems

Joint Majorization of Waterworks and Secondary Chlorination Points Considering the Chloric Odor and Economic Investment in the DWDS Using Machine Learning and Optimization Algorithms.

Max-min Ant Colony Optimization for Design of Water Distribution System

Ant Colony Optimization Algorithms for Direct Optimal Scheduling of Water Distribution System

Optimal scheduling and analysis of booster chlorination in water distribution network based on desired chlorine residual mass concentration

Homologous coverage based stable control of chlorine concentration in water distribution systems

Optimal Operation of Residual Chlorine Concentration in Multi-Source Water Distribution System

Ant Colony Optimization For Fire Test Location Of Water Distribution Model Calibration

Calibration of water quality model for distribution networks using genetic algorithm, particle swarm optimization, and hybrid methods

An Adaptive Convergence-Trajectory Controlled Ant Colony Optimization Algorithm with Application to Water Distribution System Design Problems

Optimization and Assessment of Residual Chlorine using Response Surface Methodology (RSM) and Artificial Neural Network (ANN) Modeling

Optimizing the number, locations, and chlorine dosages of booster chlorination stations in water distribution networks

Field Application of Least Cost Design Model on Water Distribution Systems using Ant Colony Optimization Algorithm

An Efficient Constraint-Based Pruning Method to Improve Chlorine Dosage Optimization

Chlorine dosage management in drinking water systems: comparing Bayesian optimization to evolutionary algorithms

Disinfectant control in drinking water networks: Integrating advection-dispersion-reaction models and byproduct constraints

Control Node Placement and Structural Controllability of Water Quality Dynamics in Drinking Networks

A Deterministic Approach for Optimization of Booster Disinfection Placement and Operation for A Water Distribution System in Beijing