Abstract:Incorporating mine tailings with industrial waste residues (IWRs) is used to manufacture filling materials, which provides an eco-friendly disposal method for IWRs and alleviate their impact on the environment. In this study, steel slag (5, 10, 15, 20 wt%), fly ash (5, 10 wt%) and blast furnace slag (52, 57, 65, 74 wt%) as the precursor, carbide slag (16, 18, 20 wt%) and desulfurization gypsum (0, 2, 3 wt%) as the activator were reutilized to synthesize the IWRs-based binder for cemented ultrafine tailings backfill (CUFTB). Experimental tests were conducted to determine the setting time, hydration heat release, mechanical behavior, and microstructure characteristics. The hydration kinetics and solidification mechanism were expounded correspondingly. Results elucidate that the initial and final setting time of CUFTB are respectively 12.08–13.92 h and 16.92–20 h <24 h much longer than the transport time in pipeline and meets the operational requirements of mine site. Hydration process of CUFTB includes initial dissolution, induction, acceleration, deceleration, and decline stages. As the hydration proceeds, the initial stage of CUFTB is regulated by nucleation and crystal growth (NG), and gradually shifted to interactions at phase boundaries (I) or diffusion (D). The high content of CS (20 wt%) promotes the hydration reaction, resulting in the increase of heat release. IWRs-based binder hydrates to form calcite, ettringite, hydroaluminite, and gehlenite. Especially, the gel products are mainly C-A-S-H, C-(Al,Na)-S-H, C-(Al,K)-S-H with Ca/Si ratio <1, demonstrating a fundamental distinction from Portland cement. Under the bonding and padding of hydration products, tailings particles are solidified well. After curing of 28 days, CUFTB exhibit high UCS values exceeding 2.0 MPa, presenting an evident improvement of 26.70% ~ 39.20% compared to those made of Portland cement. These findings are referential for preparation of cemented paste backfill by reutilizing IWRs in mine filling field.

Preparation of nickel–cobalt tailings-based cementing materials by mechano-chemical activation: Performance and mechanism

Preparation of Cementitious Materials for Backfilling by Using Nickel Slag

Pollution control performance of solidified nickel-cobalt tailings on site: Bioavailability of heavy metals and microbial response

Optimization of Cementitious Material with Thermal-Activated Lead–Zinc Tailings Based on Response Surface Methodology

Preparation of Cementitious Materials from Mechanochemically Modified Copper Smelting Slag Compounded with High-Aluminum Fly Ash

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Experimental Study on Cemented Tailings Backfill Based on Microbially Induced Calcite Precipitation

Experimental Study on the Utilization of Metallic Tailings As Cement Active Admixture

Mechanical activation of siliceous tailings and its application as cement admixtures

Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete

Experimental Study on the Preparation of Cementitious Materials Through the Activation of Lead—Zinc Tailings

Recycling multisource industrial waste residues as green binder for cemented ultrafine tailings backfill: Hydration kinetics, mechanical properties, and solidification mechanism

Recycling of ferronickel slag tailing in cementitious materials: Activation and performance

Study on the modification effect and mechanism of tailings powder on coal gangue-based mining cementitious filling material

Preliminary Study of Preheated Decarburized Activated Coal Gangue-Based Cemented Paste Backfill Material

Early-age reactivity and strength development in high volume mine tailings-based alkali activated binders and their application potential

Preparation and Application of Nano-Calcined Excavation Soil as Substitute for Cement

Mechanical property and microstructure of cemented tailings backfill containing fly ash activated by calcium formate

Preparation and application of alkali-activated cementitious materials in solidification/stabilization of chromite ore processing residue

Innovative methodology for comprehensive utilization of iron ore tailings: part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material.