Abstract:Abstract The present work has investigate the conversion of waste banana peel fiber (WBP) a raw a material in the form of food industry wastes into value added bio-polymer which can be replaced synthetic plastics. WBP represent around 85% of the total by products generated from the brewing industry and is available in large quantities throughout the year; however its primary application has been limited to animal feed. Despite this, due to its chemical composition, it has value as lignocellulosic rich material. In this paper, raw WBP has undergone physical and chemical characterisation to determine the composition analysis of extractives, cellulose and lignocellulose of WBP. WBP fiber contains a high moisture content (approx. 75 wt. %). Then, it will be process into form of composite by added of variety glycerol content (0, 10, 20, 30 and 40 grams) mixed on a dry weight basis of WBP. The solution was premixed and then heated from room temperature to 80°C, where it was maintained for 1 h while being constantly mixing. The solution was then allowed to cool at 40 °C, and then, the glycerol was added to the gelatinized suspension. The suspension was then vigorously mixing for 45 min. The mixed suspensions were immediately poured onto a aluminium-nylon mesh mold to form a composite thin film. The films were then pressed with heat press machine at 120°C for 5 minutes. The composites will dried for 24 h in an ambient room temperature in dessicator at about 37 °C until they reached a constant weight. The thickness of the films was controlled by the addition of the same weight of suspension into a dish of same size. The final thickness of the film was about 0.20 mm. This research were focus on the chemical analysis of WBP fiber where it can determine the extractives, halocellulose, lignin and α-cellulose. Then, the WBP fiber composite film were tested for physical properties analysis which were the thickness and density, moisture content, water solubility, water absorption and thickness swelling, porosity and contact angle (CA). This work shows that glycerol can strongly affect the functional properties of WBP fiber based composite

Sago pith waste: morphology, chemical composition and thermal properties

Structure analysis of three non-wood materials for liner paper

Sugarcane bagasse for sustainable development of thermoset biocomposites

Characteristics of surface modified sugarcane bagasse cellulose: application of esterification and oxidation reactions

Chemical treatment for the sodium hydroxide & epoxy resin for produce sugar cane bagasse fibre pulp rein forced epoxy composites material

Investigation of Chemical Analysis and Physical Properties of Bio-polymer Waste Banana Peel Fibre Composite

Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste

Investigation of chemical analysis and physical properties of bio-polymer waste banana peel fibre composites

Investigation of mechanical, thermal, and chemical properties of raw and NaOH-treated bagasse/halfa grass/coir fiber

FTIR, SEM and XRD analysis of activated carbon from sago wastes using acid modification

Pectin-derived Porous Materials.

Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications

Production and Characterization of Lignocellulosic Fractions from Sisal Waste

Pineapple processing waste (PPW): bioactive compounds, their extraction, and utilisation: a review

Studies on sugarcane bagasse/jute fibers reinforced bio-composites for functional thermal insulation materials

Extraction of lignocellulosic fiber and cellulose microfibrils from agro waste-palmyra fruit peduncle: Water retting, chlorine-free chemical treatments, physio-chemical, morphological, and thermal characterization

Characterization of Bio-adhesive derived from Sarawak Native Sago Starch

Synthesis and characterization of biomass-based microcrystalline cellulose extracted from Cyperus rotundus plant leaves

Synergistic effect of Hylocereus polyrhizus (dragon fruit) peel on physicomechanical, thermal, and biodegradation properties of thermoplastic sago starch/agar composites

Production of natural cellulose-based microfibres, from oil palm mesocarp fibres and pineapple leaf wastes, as porous supports for further applications

Physical–chemical characterization and thermal behavior of cassava harvest waste for application in thermochemical processes