Abstract:Plastic injection molding is widely used in many industrial applications. Plastic products are mostly used as disposable parts or as portable parts for fast replacements in many devices and machines. However, mass production is always adopted as an ideal method to cover the huge demands and customers’ needs. The problems of warpage due to thermal stresses, non-uniform pressure distribution around cavities, shrinkage, sticking and overall products quality are some of the important challenges. The main objective of this work is to analyze the stress distribution around the cavities during the molding and demolding to avoid their effects on the product quality. Moreover, diagnosing the critical pressure points around and overall the cavity projection area, which is subjected to high pressure will help to determine the optimum pressure distribution and ensure filling all cavities at the same time, which is another significant objective. Computer-aided design (CAD) and CATIA V5R20 are adopted for design and modeling procedures. The computer-aided engineering (CAE) commercial software ABAQUS 6141 has been dedicated as finite element simulation packages for the analysis of this process. Simulation results show that stress distribution over the cavities depends on both pressure and temperature gradient over the contact surfaces and can be considered as the main affecting factor. The acceptable ranges of the cavity stresses were determined according to the following values: the cavity and core region temperature of 55–65 °C, filling time of 10–20 s, ejection pressure 0.85 % of injection pressure, and holding time of 10–15 s. Also, theoretical results reveal that the uniform pressure and temperature distribution can be controlled by adjusting the cavities layout, runner, and gate size. Moreover, the simulation process shows that it is possible to facilitate and identify many difficulties during the process and modify the prototype to evaluate the overall manufacturability before further investing in tooling. Furthermore, it is also concluded that tooling iterations will be minimized according to the design of the selected process

ANALYSIS OF MACHINING PROCESS IN INJECTION MOULDING USING PLC AND PROCESS PARAMETERS

Research and Application of Advanced Process Control for Plastic Injection Molding Machine Temperature

A Closed-Loop Multivariable Quality Control Scheme for Injection Molding Process

The Design of the Injection Molding Machine Control System Based on PLC Controller

ANALYSIS OF LOAD CHARACTERISTICS AND CONTROL OF WATER HYDRAULIC SYSTEM FOR WAIM

Packing Pressure Control for Energy-Saving Servo Injection Molding Based on Fuzzy-PID Controller

Packing Pressure Control in a High-accuracy Plastic Injection Molding Machine Based on CMAC and PID Compound Controller

Plastic Injection Mold Processing

Overall Control System for Injection Molding Process

Development of a PLC Based Automation Cell for Industry

Industry 4.0 In-Line AI Quality Control of Plastic Injection Molded Parts

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Intelligent Injection Molding on Sensing, Optimization, and Control

Analysis of the main factors affecting mass production in the plastic molding process by using the finite element method

Intelligent Methods for the Process Parameter Determination of Plastic Injection Molding

Integrated Direct/Indirect Adaptive Robust Control for Electrical Driven Injection Machine Mold Closing with Accurate Parameter Estimations.

Automated Process Parameters Tuning for an Injection Moulding Machine with Soft Computing

Automation of Sustainable Industrial Machine using PLC

Designs of Soft-PLC and Fieldbus Type Control System for All-electronic Injection Molding Machine

Dynamics and Control of Surface and Mold Temperatures in Injection Molding

Study of PLC Based Automatic Pipe Bending Machine