Trim and Engine Power Joint Optimization of a Ship Based on Minimum Energy Consumption over a Whole Voyage

Yanyun Yu,Hongshuo Zhang,Zongbao Mu,Yating Li,Yutong Sun,Jia Liu
DOI: https://doi.org/10.3390/jmse12030475
IF: 2.744
2024-03-11
Journal of Marine Science and Engineering
Abstract:Trim optimization is an available approach for the energy saving and emission reduction of a ship. As a ship sails on the water, the draft and trim undergo constant changes due to the consumption of fuel oil and other consumables. As a result, the selection of the initial trim is important if ballasting or shifting liquid among the tanks is not considered during a voyage. According to the characteristics of ship navigation and maneuvering, a practical trim optimization method is proposed to identify the Optimal Trim over a Whole Voyage (OTWV) which makes the fuel consumption of the voyage minimum. The calculations of speed vs. draft and trim surfaces are created according to hull resistance data generated by CFD, model tests, or real ship measurements, and these surfaces are used to calculate the OTWV. Ultimately, a trim and Main Engine (ME) power joint optimization method is developed based on the OTWV to make the total fuel consumption minimum for a voyage with a fixed length and travel time. A 307000 DWT VLCC is taken as an example to validate the practicality and effect of the two proposed optimization methods. The trim optimization example indicates that the OTWV could save up to 1.2% of the total fuel consumption compared to the Optimal Trim at Initial Draft (OTID). The trim and ME power joint optimization results show that the proposed method could steadily find the optimal trim and ME power combination, and the OTWV could save up to 1.0% fuel consumption compared to the OTID in this case.
oceanography,engineering, marine, ocean
What problem does this paper attempt to address?
### Problems the Paper Attempts to Solve This paper aims to address the issue of how to achieve the lowest energy consumption for ships during their entire voyage by optimizing hull trim and Main Engine Power (ME Power). Specifically, the paper focuses on two main problems: 1. **Optimal Trim over the Whole Voyage (OTWV) with Fixed Main Engine Power**: - Without changing ballast water or redistributing cargo, different initial trims for a given voyage length result in different fuel consumptions. Therefore, it is necessary to find an initial trim that minimizes the total fuel consumption for the entire voyage. This optimal initial trim is referred to as the "Optimal Trim over the Whole Voyage" (OTWV). 2. **Joint Optimization of Trim and Main Engine Power with Fixed Voyage Length and Time**: - For a given voyage length and time, both the initial trim and the main engine power are variables. Different initial trim values require different main engine power values to meet the voyage length and time requirements. By adjusting these two parameters, an optimal combination can be found that minimizes fuel consumption while meeting the voyage requirements. ### Solutions 1. **Optimal Trim over the Whole Voyage with Fixed Main Engine Power**: - By establishing the relationship between hull resistance, trim, and draft, and using these relationships to calculate the voyage distance for different initial trims. Then, an optimization model is used to determine the initial trim that minimizes total fuel consumption. 2. **Joint Optimization of Trim and Main Engine Power with Fixed Voyage Length and Time**: - By adjusting the main engine power and initial trim, ensuring the voyage is completed within the given length and time, and on this basis, finding the optimal combination that minimizes fuel consumption. This involves complex optimization algorithms, including the calculation of spline curves and surfaces. ### Experimental Validation The paper validates the effectiveness and practicality of the proposed optimization methods using a 307,000 DWT Very Large Crude Carrier (VLCC) as an example. The experimental results show that by optimizing the initial trim, up to 1.2% of total fuel consumption can be saved; and by jointly optimizing trim and main engine power, an additional 1.0% of fuel consumption can be saved. ### Conclusion The methods proposed in this study can effectively reduce fuel consumption during the entire voyage of a ship, thereby reducing carbon emissions and improving operational economy. This is of great significance for promoting the development of a low-carbon economy in the shipping industry.