Large-Scale Flexible Surface-Enhanced Raman Scattering (SERS) Sensors with High Stability and Signal Homogeneity

Xiangfu Liu,Jinming Ma,Pengfei Jiang,Jiulin Shen,Rongwen Wang,Yao Wang,Guoli Tu

DOI: https://doi.org/10.1021/acsami.0c13691

2020-09-11

Abstract:Flexible surface-enhanced Raman scattering (SERS) sensors have attracted great attention as a portable and low-cost device for chemical and bio-detection. However, flexible SERS sensors tend to suffer low signal spatial homogeneity due to the uneven distribution of active plasmonic nanostructures (hot spots) and quick degradation of their sensitivity due to low adhesion of hot spots and flexible substrates during fast sampling. Herein, a large-area (20 × 20 cm²) polyimide (PI)-based SERS sensor is exploited for trace detection with high signal homogeneity and stability. The SERS sensor is constructed from PI through in situ growth of silver and gold core–shell nanoparticles ( NPs) based on chemical reduction and galvanic replacement processes. Benefiting from the abundant carboxyl groups on the surface-cleaved PI, densely and uniformly distributed NPs are successfully prepared on the film under ambient conditions. The high Raman enhancement factor (EF) (up to 1.07 × 10⁷) and detection capability with low nanomolar (10^–9 M) detection limits are obtained for this flexible SERS sensor. The uniform Raman signals in the random region show good signal homogeneity with a low variation of 8.7%. Moreover, the flexible SERS sensor exhibited superior efficiency and durability after storage for 30 days even after 500 cycles of mechanical stimuli (bending or torsion). The residue of pesticide thiram (tetramethylthiuram disulfide, TMTD) has been rapidly traced by direct sampling from the apple surface, and a sensitivity of 10 ng/cm² for TMTD was achieved. These findings show that the PI-based SERS sensor is a very strong candidate for broad and simple utilization of flexible SERS for both laboratory and commercial applications in chemical and biomolecule detections.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13691?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13691</a>.Description of the material and characterization; calculation of the enhancement factor; a list of methods for flexible SERS substrate fabrication and SERS performance; figures as described in the text (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13691/suppl_file/am0c13691_si_001.pdf">PDF</a>)Paste–peel tests were performed on (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13691/suppl_file/am0c13691_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

The paper mainly aims to address the following issues:

1. **Improving the spatial signal uniformity and stability of flexible SERS sensors**: Traditional flexible SERS sensors suffer from low spatial signal uniformity due to the uneven distribution of plasmonic nanostructures (hotspots) and rapid sensitivity decline during fast sampling due to insufficient adhesion between hotspots and the flexible substrate.

2. **Developing low-cost, easy-to-prepare SERS sensors with good performance**: Existing SERS sensors based on metallic nanostructures typically rely on complex manufacturing techniques and equipment, resulting in high costs and cumbersome preparation processes.

To address the above issues, the research team designed and fabricated a large-area flexible SERS sensor based on polyimide (PI). This sensor is achieved through the in-situ growth of silver-gold core-shell nanoparticles (Ag@Au NPs), which are characterized by high density and uniform distribution, and exhibit strong adhesion to the PI substrate. This sensor not only enables highly uniform detection of trace chemicals but also maintains good stability and durability under mechanical stimuli (such as bending or twisting). Additionally, the sensor was successfully used for the direct sampling detection of thiram (TMTD) pesticide residues on the surface of apples, demonstrating excellent potential for practical applications.