Abstract:This paper presents a demonstration of the trot-to-gallop transition and subsequent stable gallop in a robotic quadruped. The MIT Cheetah I, a planar quadruped platform for high-speed running, achieves these tasks with a speed of 3.2 m/s (Froude number of 2.1) on a treadmill. The controller benefits from clues from biological findings and it incorporates (1) a gait pattern modulation that imposes predefined gait patterns with a proprioceptive touchdown feedback, (2) tunable equilibrium-point foot-end trajectories for four limbs that intentionally modulate ground reaction forces, and (3) programmable leg compliance that provides instantaneous reflexes to leg–ground interaction. An inertial measurement unit sensor is integrated with the controller in order to regulate leg angles of attack at touchdown. We reduce the dimension of the control parameters which describe temporal/spatial characteristics of quadruped locomotion, and the values are tuned via dynamic simulation and then experiment. Given a pre-defined virtual leg compliance and a desired angle of attack of legs, the equilibrium-point foot-end trajectories and phase relationships between four legs for stable trot and gallop gaits are found independently. We propose a simple throw-and-catch gait transition strategy which connects two stable limit cycles, the trot and the gallop, by linearly varying control parameters during the transition period. Successful gait transition is achieved in both simulation and experiment. Comprehensive analysis on the characteristics of the MIT Cheetah I experimental trot-to-gallop transition is provided. The phase portraits imply that stable limit cycles are achieved with the proposed controller in both trot and gallop, which enables the trot-to-gallop gait transition at high speed.

MIT Cheetah 3: Design and Control of a Robust, Dynamic Quadruped Robot

Towards dynamic trot gait locomotion: Design, control, and experiments with Cheetah-cub, a compliant quadruped robot

Dynamic Locomotion in the MIT Cheetah 3 Through Convex Model-Predictive Control

Design and Development of a Cheetah Robot under the Neural Mechanism Controlling the Leg's Muscles

System Design of A Cheetah Robot Toward Ultra-High Speed

Bio-Inspired Controller for A Robot Cheetah with A Neural Mechanism Controlling Leg Muscles

Design Of A Mammal-Kike Hexapod Walking Robot

Acinonyx jubatus-Inspired Quadruped Robotics: Integrating Neural Oscillators for Enhanced Locomotion Control

Implementation of trot-to-gallop transition and subsequent gallop on the MIT Cheetah I

Bionic Lightweight Design of Limb Leg Units for Hydraulic Quadruped Robots by Additive Manufacturing and Topology Optimization

Design and Dynamic Locomotion Control of Quadruped Robot with Perception-Less Terrain Adaptation

Research on Cheetah Bionic Quadruped Robot Technology

Highly Dynamic Quadruped Locomotion via Whole-Body Impulse Control and Model Predictive Control

Design and Control of a Quadruped Robot with Changeable Configuration

The Moco-Minitaur: A Low-Cost Direct-Drive Quadruped Robot for Dynamic Locomotion

Multi-task Control for a Quadruped Robot with Changeable Leg Configuration

Adaptive Walking of a Quadrupedal Robot Based on Layered Biological Reflexes

Behavior-Based Control Of A Hybrid Quadruped Robot

Control of a Quadruped Robot with Bionic Springy Legs in Trotting Gait

Bionic Control of Cheetah Bounding with a Segmented Spine

Efficient Dynamic Locomotion of Quadruped Robot Via Adaptive Diagonal Gait