Abstract:This paper presents a multifunctional coil technique to enhance the transfer efficiency of an inductively-coupled wireless power transfer (WPT) system, regardless of the alignment condition and size ratio between the transmitter (Tx) and receiver (Rx) coils. The technique incorporates an auxiliary coil on the Tx side, where current is induced through coupling from the primary coil. Since the Tx coil consists of two coils, transmission to the Rx occurs through the coil with the higher coupling coefficient, determined by the misalignment state. Additionally, by controlling this current using a varactor placed on the auxiliary coil, an optimal magnetic flux is generated based on the alignment condition and/or the size of the Rx coil. In perfect alignment, the auxiliary coil focuses the flux from the Tx to the Rx coil, maximizing transfer efficiency. In misalignment scenarios, the current on the auxiliary coil is adjusted to shift the effective center of the Tx coil, achieving the strongest alignment of the magnetic flux traversing the Rx coil. This adjustment, which can be controlled adaptively based not only on the degree of misalignment but also on the size of the Rx coil, enables virtually null-free operation across varying misalignment conditions and for different Rx sizes. Furthermore, as this multifunctionality of the proposed system is achieved with a minimal number of additional components-just a single auxiliary coil and a single varactor-the impact on the overall quality factor (Q) of the system is minimized, contributing to the higher efficiency. In a size-symmetric system, where the Tx and Rx coils have the same size, the efficiency reaches 98.1% in perfect alignment and remains above 60% with up to 135% misalignment relative to the largest coil dimension. In a size-asymmetric system, with the Rx coil reduced to a quarter of the Tx coil, the efficiency is 96.1% in perfect alignment and remains above 60% up to 95% misalignment. Despite its enhanced practicality through a simple structure featuring only one auxiliary coil and an asymmetric configuration integrated solely on the Tx side, the proposed technique surpasses previous methods by delivering significantly superior performance. Moreover, it demonstrates unprecedented tolerance to both misalignment and smaller Rx coil sizes, which is frequently encountered in practical applications.

Separation-Misalignment Insensitive WPT System Using Two-Plane Printed Inductors

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

A Reconfigurable Resonant Topology of Wireless Power Transfer Systems with Large Coupling Ranges

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Basic Principles of Point-to-Point Omnidirectional Wireless Power Transfer System

A Misalignment Resilient System for Magnetically Coupled Resonant Wireless Power Transfer

Reconfigurable Resonant Topology Linking Two-, Three-, and Four-Coil Modes for WPT with Large Coupling Range and Fixed Frequency

A Wireless Power Transfer System With High Misalignment Tolerance Based on Dual Side Variable Inductor Control

Modified Coupler With Reduced Misalignment Issues for Wireless Power Transfer System

A Single-Transmitter Multi-Receiver Wireless Power Transfer System with High Coil Misalignment Tolerance and Variable Power Allocation Ratios

Dual-Transmitter Inductive Power Transfer System with Improved Misalignment Tolerance and High Compatibility with Different-Sized Receivers

Reconfigurable detuned dual‐frequency series–series compensated WPT system for high anti‐misalignment tolerance

A Misalignment Tolerant Design for a Dual-Coupled LCC-S-Compensated WPT System With Load-Independent CC Output

Optimized Design of Passive Array Coils for HighEfficiency and Anti-Misalignment WPT System

Misalignment‐tolerant coupling cell of 2‐D modular WPT system for charging area simplified extension

Self-Decoupled and Integrated Coils for Modular Multitransmitter Wireless Power Transfer Systems

Multifunctional coil technique for alignment-agnostic and Rx coil size-insensitive efficiency enhancement for wireless power transfer applications

A Three-Resonator Wireless Power Transfer System with Constant-Output Feature Within a Misalignment Range

Strong misalignment tolerance wireless power transfer with active adjustment of magnetic shielding

A New Hybrid Magnetic Coupler in Inductive Power Transfer System for High Misalignment Tolerance

Contactless Measurement of Current and Mutual Inductance in Wireless Power Transfer System Based on Sandwich Structure