Abstract:Abstract To determine the main factors influencing dynamic pressure and large deformation roadways, a targeted set of support technologies was designed. The 2603 air inlet roadway of the Zhangcun coal mine in Lu'an, Shanxi Province, was taken as an example. The influence of the Wenwangshan South normal fault and in situ stress field on the dynamic pressure roadway was analyzed theoretically, and the main factors influencing this dynamic pressure and large deformation roadway under natural geological conditions were determined. The effect of the existing roadway support scheme was evaluated by field test methods such as nondestructive bolt testing. The influence of mining two working faces on the dynamic pressure and large deformation roadway was studied by the FLAC3D numerical simulation method. On this basis, a new grouting material was developed, a complete set of technical schemes of full-section integrated cooperative support of dynamic pressure and large deformation roadways was proposed, and the field application effect was verified. The results showed that under natural geological conditions, the 2603 air inlet roadway was located within the influence range of the Wenwangshan South normal fault, which was significantly affected and controlled by the fault. The included angle between the roadway extension direction and the maximum principal stress was 74°, which was not conducive to the stability of the roadway. The range of the roadway loose zone was large. Under the existing support conditions, the surrounding rock could not form a relatively stable structure, which was one of the main reasons for the large deformation of the surrounding rock in the dynamic pressure roadway. The 2603 air inlet roadway was affected by the mining of both the adjacent working face and the 2603 working face. The stresses were superimposed, and the roadway was greatly deformed and damaged. A new grouting material was developed. A crosslinking agent prepared by toluene diisocyanate and polyether polyol was added to the existing polyurethane material to form a new grouting material, and a complete supporting technical scheme was proposed. The field application results showed that the displacement and floor heave of both sides of the roadway were reduced by approximately 87%, the deformation and failure of the coal and rock mass of the roadway were effectively controlled, and the deformation of the dynamic pressure roadway was greatly reduced.

Deformation mechanism and treatment technology research of coal pillars in acute inclined goafs under expressway

Pressure Relief and Bolt Grouting Reinforcement and Width Optimization of Narrow Coal Pillar for Goaf-Side Entry Driving in Deep Thick Coal Seam: A Case Study

Study on small coal pillar in gob-side entry driving and control technology of the surrounding rock in a high-stress roadway

Surrounding Rock Deformation Mechanism and Control Technology for the Roadway in the Fault-Disturbed Zone under Special-Shaped Coal Pillars

Stability control of goaf‐driven roadway surrounding rock under interchange remaining coal pillar in close distance coal seams

Study on Surrounding Rock Deformation Mechanism and Control of Roadway with Large Section and Extra-Thick Top Coal

Non-uniform failure and differential pressure relief technology of roadway under irregular goafs in deep close-distance coal seams

Surrounding Rocks Deformation Mechanism and Roof Cutting-Grouting Joint Control Technology for Soft and Thick Coal Seam Roadway

Analysis of Surrounding Rock Control Technology and Its Application on a Dynamic Pressure Roadway in a Thick Coal Seam

Deformation and Failure Characteristics and Control Technology of Roadway Surrounding Rock in Deep Coal Mines

Study on surrounding rock failure mechanism and rational coal pillar width of the gob‐side coal roadway under influence of intense dynamic pressure

Research on main influencing factors and complete support technology for dynamic pressure and large deformation roadway

Failure mechanisms and reinforcement support of roadway in deep coal seam: A case study

Study on Time-Dependent Failure Mechanisms and CBAG Differential Support Technology of Roadway in Steeply Inclined Coal Seam

Study on Failure Mechanism and Control Technology of Roadway Surrounding Rock under Complex Occurrence Coal Seam

Failure Mechanisms and Reinforcement Support of Soft Rock Roadway in Deep Extra-Thick Coal Seam: A Case Study

Development of Cement-Based Grouting Material for Reinforcing Narrow Coal Pillars and Engineering Applications

Study on stress distribution law of surrounding rock of roadway under the goaf and mechanism of pressure relief and impact reduction

Investigation on rational width of coal pillar and roadway support in isolated panel of extra-thick coal seam

Control Technology of Soft Rock Floor in Mining Roadway with Coal Pillar Protection: A case study

True 3D geomechanical model test for research on rheological deformation and failure characteristics of deep soft rock roadways