Abstract:Low-specific speed centrifugal pump as turbines (PATs) are widely applied in fields with high head and small flow rate inlet conditions to recover excess hydraulic energy of chemical and mining industries because they are easy to produce, install, operate, and maintain. However, given their low efficiency, the energy recovery system is unsatisfactory compared with the traditional hydraulic turbine in terms of economics. To deeply reveal the energy loss characteristics of PATs, the entropy generation analysis model is adopted to visualize the high energy loss regions and quantify the energy loss in the key domains of PATs. The relationship between entropy generation and local flow characteristic is established using the regularized helical method, flow section diagnosis method, and outflow condition of impeller analysis method. Results show that the wall entropy generation rate has the greatest contribution to the irreversible hydraulic loss at the domains except for the outlet duct, and the proportion of direct entropy generation rate is remarkably smaller than those of the other components of entropy generation rate and can be ignored. The leakage flow of the front chamber wear ring greatly influences the wall entropy generation rate of the outlet duct, and the local wall entropy generation of the chamber and impeller is proportional to the velocity of its upstream inlet. In the volute, the entropy generation is primarily caused by large-scale vortices induced by the backflow, impact between fluids, and high-velocity gradients. The high values of the turbulent entropy generation rate distribution in the impeller are mainly concentrated at the inlet of the flow channel, trailing edge of the blade, mid-posterior of the pressure side, and throat of the blade. The vortex-breaking baffle could improve the uniformity of axial velocity effectively and decline the divergent flow angle to stabilize the flow in the outlet duct of PATs. The results of this study indicate that the proposed approach can improve the efficiency and stabilize the operation of PATs.

Analyses of energy loss characteristics of a low-specific speed centrifugal pump as turbines (PATs) based on entropy generation analysis model