Abstract:Abstract This paper presents static and transient solutions for the pressurized water reactor (PWR) MOX/UO2 transient benchmark by Serpent 2 Monte Carlo (MC) code and open nodal core simulator called Abu Dhabi Polytechnic Reactor Simulator (ADPRES). The presence of mixed oxide (MOX) fuels and burn-up variation in the benchmark pose challenges for reactor simulators due to severe flux gradient across fuel assemblies. In this work, the two-step method was used, in which the assembly level two-group constants were generated from single assembly calculations with zero net current boundary conditions using Serpent 2 Monte Carlo code, and later the core calculation was performed using ADPRES open nodal core simulator. Two types of diffusion coefficients were generated: the conventional B1 leakage corrected and the cumulative migration method (CMM). Finally, the solutions of Serpent 2/ADPRES, including multiplication factor, power distribution, control rod (CR) worth, and critical boron concentration (CBC) using both diffusion coefficients, were compared against solutions from heterogeneous Serpent 2 calculations where the fuel and cladding are explicitly modeled. The reactor power during transients was also compared qualitatively against other nodal core simulators. The results showed that Serpent 2/ADPRES were able to predict the heterogeneous Monte Carlo solutions very well with reasonable differences. The transient solutions were also quite accurate compared to other nodal core simulators. For the diffusion coefficients comparison, it was found that the CMM diffusion coefficient provides more accurate solutions for the benchmark compared to the B1 leakage corrected diffusion coefficients.

BURNUP CALCULATION CAPABILITY IN THE PSG2 / SERPENT MONTE CARLO REACTOR PHYSICS CODE

A Serpent/OpenFOAM coupling for 3D burnup analysis

The Effect of Serpent 2 Calculation Parameters on Evaluated Spent Nuclear Fuel Source Term

Pressurized water reactor spent nuclear fuel data library produced with the Serpent2 code

Development of Burnup Methods and Capabilities in Monte Carlo Code RMC

ICONE19-43353 DEVELOPMENT AND VALIDATION OF BURNUP FUNCTION IN REACTOR MONTE CARLO RMC

Monte Carlo Simulation of the UK’s First EPR Nuclear Reactor Startup Core Using Serpent

Pressurized Water Reactor Mixed Oxide/UO2 Transient Benchmark Calculations Using Monte Carlo Serpent 2 Code and Open Nodal Core Simulator ADPRES

Assessment of the Photon and Neutron Source Term for the NPP Krško Spent Fuel

BEAVRS Full Core Burnup Calculation in Hot Full Power Condition by RMC Code

A Monte Carlo study on burnup treatment in sodium-cooled reactor with Th fuel

Evaluation of Kinetic Parameters RSG-GAS Reactor Equilibrium Silicide Core Using Continuous-Energy Monte Carlo Serpent 2 Code

Burnup-Dependent Core Neutronics Analysis of Plate-Type Research Reactor Using Deterministic and Stochastic Methods

Neutronic Analysis of the Fusion Reactor ARC: Monte Carlo Simulations with the Serpent Code

Monte Carlo Investigation of the UK’s First EPR Nuclear Reactor Startup Core Using Serpent

Development of MCBurn and its application in the analysis of SCWR physical characteristics

RMC Capability of Multi-cycle HFP Full Core Burnup Simulation

SCALE capabilities for high temperature gas-cooled reactor analysis

Propagation of Nuclear Data Uncertainties for ELECTRA Burn-up Calculations

Preservation of kinetics parameters generated by Monte Carlo calculations in two-step deterministic calculations

Development of the point-depletion code DEPTH