Abstract:In construction and architectural industries, multi-material additive manufacturing is gaining more interest because of obtaining the combined material properties in a single additive process by multiple materials. The present work concentrates on developing functionally gradient multi-material composite using Poly Lactic Acid (PLA), and novel extruded walnut shell particle reinforced Poly Lactic Acid (WPLA) by Fused Filament Fabrication technology. This work followed single and multi-gradient material deposition approaches, and their mechanical, thermal, and tribological properties were compared with standard 3D printed PLA and walnut shell-reinforced PLA composite. Among the 3D printed functional graded multi-materials, the composites with single-gradient PW configuration exhibits better compressive and D shore hardness value of 63.68 MPa and 76.2 compared with the neat PLA composite. The results show that considering the tensile and flexural samples the single gradient PLA samples shows better values when compared with all other multi gradient prepared composites. The highest heat deflection temperature of 56 °C was observed on the WPLA composite and for gradient materials PW composite which is PLA (50%) and walnut shell reinforced PLA (50%) sample exhibits the maximum heat deflection temperature of 54.4 °C. Furthermore, considering the tribological and thermal properties, the multi-gradient composite of WPW configured with PLA of 40% as inner core exhibits the lowest thermal conductivity of 0.087 W/mK and a specific wear rate of 1.631 × 10 −6 mm 3 /Nm when compared with neat PLA composite. Therefore, among the novel functional graded multi-material, the sample PW with PLA (50%) and walnut shell reinforced PLA (50%) composite will be more suitable for semi-structural applications, and the composite with WPW designation (PLA of 40% as inner core) will suit the high wear-resistant and constructional building panel material for thermal proofing applications.

Fabrication and mechanical behavior of structurally graded material (ceramic-reinforced polylactic acid/polylactic acid) for integrated engineering application

Fabrication of structurally graded material (pure PLA/WFPC): Mechanical and microscopic aspects

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

Performance evaluation of structurally graded material fabricated through additive manufacturingLeistungsbewertung additiv gefertigter strukturell graduierter Werkstoffe

Investigation of mechanical properties on functionally graded material reinforced with graphene nanoplatelets for biomedical applications

Numerical Modeling of Mechanical Behavior of Functionally Graded Polylactic Acid–Acrylonitrile Benzidine Styrene Produced via Fused Deposition Modeling: Experimental Observations

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Development of functional gradient multi-material composites using Poly Lactic Acid and walnut shell reinforced Poly Lactic Acid filaments by fused filament fabrication technology

On the Mechanical Performance of Polylactic Material Reinforced by Ceramic in Fused Filament Fabrication

An innovative multilayered material fabricated through additive manufacturing for structural applications: method and mechanical properties

Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling

Investigation of the structure and mechanical properties of a novel dental graded glass/zirconia ceramic

Effect of density grading on the mechanical behaviour of advanced functionally graded lattice structures

3D printed polylactide based zirconia toughened alumina composites: fabrication, mechanical and in vitro evaluation

Impact and torsional behavior of additive layer‐manufactured biopolymer: An advancement for orthopedic applications

Fabrication, mechanical, finite element and In vitro evaluation of 3D printed polylactide/biphasic calcium phosphate composite blends

Mechanical Behaviour of Polylactic Acid Parts Fabricated via Material Extrusion Process: A Taguchi-Grey Relational Analysis Approach

Effect of Infill Patterns with Machine Learning Techniques on the Tensile Properties of Polylactic Acid-Based Ceramic Materials with Fused Filament Fabrication

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Mechanical behavior and failure mode of body-centered cubic, gyroid, diamond, and Voronoi functionally graded additively manufactured biomedical lattice structures

The mechanics of extruded polylactic acid: An investigation into the effects of its multiple recycling and the inclusion of fly ash