Abstract:The paper presents research results and a comparative analysis of the load-bearing deformability and crack resistance of basalt concrete beams brought to the limit state (ULS) in previous tests. The beams were reinforced with prestressed metal clips under high-level static and low-cycle alternating loads. The work performed comparative calculations of reinforced building structures using proprietary methods and existing regulatory methods. A comparison of the experimental and calculated values of the bearing capacity of damaged experimental beam samples showed their unsatisfactory convergence because the well-known regulatory and proprietary methods provide for the calculation of the bearing capacity of damaged reinforced concrete structures along a dangerous inclined crack under the predominant action of transverse force, i.e. the top of a dangerous inclined crack and clamps and vertical elements of external reinforcement. However, experimental and theoretical studies have shown that the destruction of prototype beams with large and medium shear spans under a variable low-cycle load occurs along dangerous inclined through cracks, from the overwhelming action of bending moments, in the longitudinal reinforcement elements of the frame, in the longitudinal tensile reinforcement, as well as transverse beam beams and yield stress cages. That is, the real physical picture of the operation of the system “damaged reinforced concrete beam – prestressed metal reinforcement cage” under alternating transverse load at high levels differs significantly from the physical model of previously existing regulatory and proprietary methods. All existing regulatory and proprietary methods provide for the calculation of the bearing capacity of damaged reinforced concrete structures along a dangerous inclined crack under the predominant action of transverse force, that is, the components of the bearing capacity of inclined sections on concrete above the top of a dangerous inclined crack and clamps and external elements are taken into account. Experimental and theoretical studies have shown that the destruction of prototype beams with large and medium shear spans, under alternating low-cycle loads, occurs along dangerous inclined through cracks from the overwhelming action of bending moments in the longitudinal tensile reinforcement, as well as in the transverse rods of the beam and the cage yield strength.

Experimental studies of the strength of bent reinforced concrete elements with crimp couplings of reinforcement

Experimental Study on CFNRST Members under Combined Compression and Bending

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Experimental and theoretical studies of plug joints reinforced concrete columns under transverse force

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beams

STRESS-STRAIN STATE OF BENT REINFORCED CONCRETE ELEMENTS OF CONTINUOUS AND COMPOSITE CROSS-SECTION BASED ON A REFINED NONLINEAR CALCULATION METHOD

Experimental and Theoretical Investigations on Crack Spacing and Stiffness of Textile-Reinforced Concrete–strengthened Reinforced Concrete Beams

Load distribution and passive confinement in reinforced concrete: Development of a mechanical model

Investigation of the Influence of Local Low Strength Concrete on the Bearing Capacity of Bending Reinforced Concrete Beams

Investigation of the performance of grouted couplers in vehicle impacted reinforced concrete ABC bridge piers

Reinforced Concrete Columns with Local Prestressing Rebars: A Calculation Theory and an Experimental Study

EFFECTIVE OPTION OF REINFORCEMENT FOR REINFORCED CONCRETE TAPERED ELEMENTS

New Connection System for Confined Concrete Columns and Beams. II: Theoretical Modeling

Numerical and experimental studies of deflections of conventional and strengthened reinforced concrete bendable elements under short-term dynamic loading

Experimental study on the mechanical properties of concrete canvas and CFRP jointly confined circular concrete columns under axial compression

RESEARCH OF THE STRESS-STRAIN STATE OF PRECAST REINFORCED CONCRETE HOLLOW CORE SLABS UNDER THE ACTION OF A CONCENTRATED AND UNIFORMLY DISTRIBUTED LOAD

Experimental and analytical investigation on the confinement behavior of low strength concrete under axial compression

Testing of Coupling Beams with Equal End Rotations Maintained and Local Joint Deformation Allowed

New design concepts for strengthening of continuous reinforced-concrete beams

Comparative analysis of the load-bearing capacity of experimental damaged reinforced concrete elements reinforced with metal clips