Abstract:All Solid State Lithium based Batteries (ASSLB) using a stable inorganic solid state electrolyte are envisaged as the most promising answer to solve the safety issues of Li-ion batteries using inflammable organic liquid electrolyte. Garnet Li 7 La 3 Zr 2 O 7 showing high ionic conductivity and high stability versus metallic lithium is currently the most appealing solid electrolyte to be used in oxide based ASSLB. However, its high reactivity with moisture and sensitivity to all energetic process lead to strong difficulties in obtaining stable fully dense pellets while mandatory to ensure its role as mechanical barrier to avoid the short-circuit caused by Li-dendrites [1-2]. In this work, Spark Plasma Sintering is used as both a characterization and a fast sintering techniques to determine the influence of side products and efficiency of applied processes to remove them in reaching dense pellets with high ionic conductivity. Commercial Ta-doped LLZO powder is fully characterized using conventional techniques to identify chemical and thermal stability. SPS experiments are conducted to determine the influence of the side products on the sintering. The efficiency of powder pretreatment designed to remove side products is determined based on data collected during SPS experiments. SPS parameters (applied pressure, temperature ramping, densification dwell ...) are then optimized allowing reaching in a reproducible way pellets with high density (>97 %) and high mechanical strength. Analysis using XPS, SEM and XRD of obtained pellets shows that decomposition occurs only at the surface while the core of the pellet is made of pure cubic phase Ta-doped LLZO. Impedance spectroscopy is used to evidence the influence of side products on the electrical properties and confirms high ionic conductivity (0.5 mS/cm) and very low electronic conductivity of optimized electrolyte. The sintering temperature and dwell time are then optimized by advanced sintering techniques (high pressure, Flash SPS) allowing to prevent the chemical instability usually observed between LLZO and active materials (LiCoO 2 or Li[Ni 1-x-y Co x Mn y ]O 2 (NCM)) and to obtain a cathodic half-cell (LLZO/positive electrode) in one step. References : [1] H. Yamada, T. Ito, R. Basappa, Electrochimica Acta 222 (2016) 648–656. [2] M. Kotobuki, M.Koishi, Journal of Alloys and Compounds 826 (2020) 15421.

Recent development on low temperature synthesis of cubic-phase LLZO electrolyte particles for application in all-solid-state batteries

Accelerating the Development of LLZO in Solid‐State Batteries Toward Commercialization: A Comprehensive Review

Garnet-type Solid-state Electrolyte Li7La3Zr2O12: Crystal Structure, Element Doping and Interface Strategies for Solid-state Lithium Batteries

Practical development and challenges of garnet-structured Li7La3Zr2O12 electrolytes for all-solid-state lithium-ion batteries: A review

Garnet-type solid-state electrolytes: crystal structure, interfacial challenges and controlling strategies

Recent developments in garnet based solid state electrolytes for thin film batteries

Low-Temperature Manufacture of Cubic-Phase Li7La3Zr2O12 Electrolyte for All-Solid-State Batteries by Bed Powder

Crystal Structure and Preparation of Li7La3Zr2O12 (LLZO) Solid-State Electrolyte and Doping Impacts on the Conductivity: An Overview

Elucidating the Role of Multi-Scale Microstructures in Li7La3Zr2O12 Based All-Solid-state Lithium Batteries

Challenges and Perspectives of Garnet Solid Electrolytes for All Solid-State Lithium Batteries

Recent progress for all solid state battery using sulfide and oxide solid electrolytes

Compositional and Structural Control in LLZO Solid Electrolytes

Improvement of Ionic Conductivity in Li7La3Zr2O12 (LLZO) Solid Electrolyte By Doping with Aluminum/Tungsten

Ta-LLZO Garnet Processed By Spark Plasma Sintering for All Solid State Batteries

Review of Garnet-Based Solid Electrolytes for Li-Ion Batteries (LIBs)

Garnet‐Type Solid‐State Electrolytes: Crystal‐Phase Regulation and Interface Modification for Enhanced Lithium Metal Batteries

Elucidating the Importance of Quaternary Dopants in Stabilizing Cubic LLZO at Low Temperature

Development of Lithium-Stuffed Garnet-Type Oxide Solid Electrolytes with High Ionic Conductivity for Application to All-Solid-State Batteries

Effect of Sintering on Structural Modification and Phase Transition of Al-Substituted LLZO Electrolytes for Solid State Battery Applications

Ultrafast One‐Step Synthesis of Garnet‐Type Solid Electrolytes With Modified Surface and Microstructure for Solid‐State Lithium‐Metal Batteries

Prospects of LLZO type solid electrolyte: From material design to battery application