A model predictive control of three‐phase grid‐connected current‐source inverter based on optimization theory

Yiwen Geng,Tengfa Zhou,Fucheng Cao,Yue Xin,Huibin Wang
DOI: https://doi.org/10.1049/pel2.12590
IF: 2
2023-09-25
IET Power Electronics
Abstract:For the control under unbalanced and harmonic grids, this paper discusses in detail about the suppression mechanism and specific implementation methods of the proposed method for grid voltage harmonics. Furthermore, the necessary parameters are designed according to the Bode diagram of the control system, and the position map of the closed‐loop pole also shows that the proposed method has good anti‐disturbance to AC‐side inductance parameters. Finally, the simulation and experimental results demonstrate the excellent performance of the proposed method. In the three‐phase grid‐connected current‐source inverters (CSIs), the resonance result from the AC‐side CL filter and the quality of the grid‐current waveform under the unbalanced and harmonic grid voltage conditions are two issues deserving attention. To solve the two problems, a continuous control set‐model predictive control (CCS‐MPC) method based on the optimization theory is proposed in the two‐phase synchronous coordinate frame in this paper. The constructed cost function takes grid‐connected current and output current of the inverter as control target, and obtains its optimal solution under the least‐squares method, where the optimal inverter‐side current reference is composed of inductor‐current proportional feedback, capacitor‐voltage proportional feedback, and inverter‐side current steady‐state value feedforward. The proposed method can easily realize the normal operation of three‐phase grid‐connected CSIs because the method can be determined by only one parameter under the unbalanced and distorted grids. Furthermore, in the proposed method, the proportional feedback of capacitor voltage can effectively suppress the CL filter resonance. Finally, simulation and experimental results verify the effectiveness of the proposed control strategy.
engineering, electrical & electronic
What problem does this paper attempt to address?