Abstract:Abstract In this study, a closed-form analytical solution is derived to compute the stress formulations for a thick cylindrical pressure vessel made of functionally graded material (FGM) with varying parameters, which are mechanical and thermal boundary conditions. The assumed mechanical boundary condition is the time-dependent pressure acting on the internal surface of the cylinder, while the assumed thermal boundary condition is the transient temperature distribution over the cylinder thickness. The material properties are considered to be graded exponentially in the radial direction, except Poisson’s ratio which is assumed to be constant. The stress and displacement formulations are evaluated using Mathematica software for the uncoupled thermo-mechanical analysis. The results of radial, hoop, and axial stress are plotted at various times for two FGM cylinders, the SS304-Alumina FGM cylinder and the TZM-SIC FGM cylinder, to study the impact of using different materials for the same boundary conditions on the results. The results obtained in this study are beneficial as these contribute to the design and modeling of cylinders that are exposed to time-dependent internal pressure and transient temperature profiles.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the stress analysis of thick - walled cylindrical pressure vessels made of functionally graded materials (FGM) under transient thermal boundary conditions and time - varying mechanical boundary conditions with different mechanical and thermal boundary conditions. Specifically, the research aims to: 1. **Derive a closed - form analytical solution**: For thick - walled cylindrical pressure vessels made of functionally graded materials, considering the exponential variation of material properties along the radial direction, derive a closed - form analytical solution for calculating stress and displacement. 2. **Evaluate stress and displacement**: Use Mathematica software to evaluate the radial, hoop and axial stresses under different times and different material conditions (such as SS304 - Alumina FGM and TZM - SiC FGM), and present the results through charts. 3. **Compare the effects of different materials**: Study the influence of using different materials on the stress results under the same boundary conditions to optimize design and modeling. ### Research Background - **Applications of functionally graded materials (FGM)**: Functionally graded materials are widely used in various engineering fields due to their excellent properties, especially in cases where high - temperature environments and mechanical loads coexist. - **Existing research**: There have been many studies on the stress analysis of FGM cylinders under different loading conditions, but most of them focus on a single transient thermal boundary condition or a time - varying mechanical boundary condition. This study considers the effects of both boundary conditions simultaneously. ### Main Methods 1. **Problem identification**: - Assume that the inner radius of the cylinder is \( R_i \) and the outer radius is \( R_o \). - The inner surface is subjected to a time - varying pressure \( P(t) \). - Material properties (such as Young's modulus, coefficient of thermal expansion and thermal conductivity) vary exponentially along the radial direction, and Poisson's ratio is assumed to be constant. 2. **Formulate the governing equations and equilibrium equations**: - Using the infinitesimal strain theory, establish the equilibrium equations and strain - displacement relationships of an axisymmetric cylinder under axisymmetric loads. - Consider the superposition effect of thermal stress and mechanical stress. 3. **Transient temperature distribution**: - Calculate the transient temperature distribution within the cylinder wall through the one - dimensional heat conduction equation. 4. **Thermo - elastic analysis**: - Apply the linear elastic uncoupled thermo - dynamic conduction conditions to solve the mechanical stress and thermal stress separately. - Obtain the general equation of displacement by solving the second - order non - homogeneous differential equation, and further solve the stress and strain. ### Results and Numerical Examples - **Numerical examples**: Through numerical calculations, show the radial, hoop and axial stresses within the cylinder wall at different times, as well as the von Mises equivalent stress and axial strain. - **Material comparison**: Compare the stress and strain results of different materials (such as SS304 - Alumina FGM and TZM - SiC FGM) under the same boundary conditions to evaluate the influence of material selection on design. ### Conclusions - This study provides a valuable reference for the design and modeling of functionally graded material cylindrical pressure vessels by simultaneously considering transient thermal boundary conditions and time - varying mechanical boundary conditions. - The selection of different materials has a significant impact on the stress and strain of the cylinder. Selecting appropriate materials can effectively reduce the stress value and improve the safety and reliability of the structure.

Analysis of a thick cylindrical FGM pressure vessel with variable parameters using thermoelasticity

Magneto-Thermo-Elastic Theoretical Solution for Functionally Graded Thick-Walled Tube under Magnetic, Thermal and Mechanical Loads Based on Voigt Method

Semi-analytical Vibration Analysis of FGM Cylindrical Shells Surrounded by Elastic Foundations in a Thermal Environment

Finite element analysis of a generalized rotating FGM vessel subjected to thermo-mechanical loadings: Effect of Poisson ratio and inhomogeneity parameters

Thermo-mechanical Analysis of a Multilayer Hollow Cylindrical Thermal Protection Structure with Functionally Graded Ultrahigh-Temperature Ceramic to Be Heat Resistant Layer

Numerical analysis of the elastic-plastic behavior of a tubular structure in FGM under pressure and defect presence

Novel Semi-Analytical Solutions For The Transient Behaviors Of Functionally Graded Material Plates In The Thermal Environment

A Semi-Analytical State-Space Approach for 3d Transient Analysis of Functionally Graded Material Cylindrical Shells

Stress analysis of a thick-walled cylinder composed of incompressible hyperelastic materials subjected to internal and/or external pressure: analytical and finite element analysis

Thermoelastic analysis of FG-CNTRC cylindrical shells with various boundary conditions and temperature-dependent characteristics using quasi-3D higher-order shear deformation theory

A general analytical approach to the thermoelastic analysis of asymmetric anisotropic nanoplate with polygonal holes

Three-dimensional Analysis of a Thick FGM Rectangular Plate in Thermal Environment

Thermal Vibration of Thick FGM Conical Shells by Using Third-Order Shear Deformation Theory

Unsteady temperature distribution in a cylinder made of functionally graded materials under circumferentially-varying convective heat transfer boundary conditions

Analysis of FGM micro cylindrical shell with variable thickness using Cooper Naghdi model: Bending and buckling solutions

A simple method for mechanical analysis of pressurized functionally graded material thick-walled cylinder

Thermal buckling analysis of annular FGM plate having variable thickness under thermal load of arbitrary distribution by finite element method

3D Thermoelasticity Solutions for Functionally Graded Thick Plates

Semianalytical Three-Dimensional Solutions for the Transient Response of Functionally Graded Material Rectangular Plates

Hygrothermal buckling analysis of thin rectangular FGM plate with variable thickness

A novel approach to stress analysis of pressurized FGM cylinders, disks and spheres