Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Tung oil improves dimensional stability of flattened bamboo

Drying characteristics, hygroscopicity, and dimensional stability of natural tung oil dried bamboo

Synergistic effects of tung oil and heat treatment on physicochemical properties of bamboo materials

Improvement in hygroscopicity and dimensional stability of bamboo through a synthetic modification of maleic anhydride with tung oil heat treatment

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

A Novel Bamboo–Wood Composite Utilizing High-Utilization, Easy-to-Manufacture Bamboo Units: Optimization of Mechanical Properties and Bonding Performance

Study on Bamboo Longitudinal Flattening Technology

The effect of oil heat treatment on biological, mechanical and physical properties of bamboo

Upgrading Fuel Quality of Moso Bamboo Via Low Temperature Thermochemical Treatments: Dry Torrefaction and Hydrothermal Carbonization

Improving the dimensional stability of round bamboo by environment-friendly modified rosin

Effects of integrated process of flattening and densification on the gradient structure and properties of Moso Bamboo

Combined Chemical Modification of Bamboo Material Prepared Using Vinyl Acetate and Methyl Methacrylate: Dimensional Stability, Chemical Structure, and Dynamic Mechanical Properties

Bamboo flattening technique: a literature and patent review

Effects of tannin acid impregnated pretreatment on dimensional stability and chemical composition of heat-treated Chinese fir

Effects of Heat Treatment on Surface Physicochemical Properties and Sorption Behavior of Bamboo (phyllostachys Edulis)

Augmenting bamboo strength and thermal stability for sustainable construction

Multi-Scale Evaluation of the Effect of Thermal Modification on Chemical Components, Dimensional Stability, and Anti-Mildew Properties of Moso Bamboo

Study on the Properties of Transparent Bamboo Prepared by Epoxy Resin Impregnation

Effects of different pretreatment methods on the dimensional stability of steamed bamboo units

Dimensional stability and mold resistance of bamboo slivers treated by alkali