Abstract:The development of the Li-ion battery (LIB) has led to a portable electronics revolution during last couple of decades, however, the traditional LIB seems to be insufficient for practical application in some emerging markets due to the limited specific energy of the cell. For mass market conversion to electric vehicles, high specific energy (> 300 Wh kg-1) rechargeable battery systems of low-cost for energy storage are required. Among all alternatives, the lithium/sulfur cell has been considered most promising due to its low cost, high abundance, ultrahigh theoretical specific energy (2,566 Wh kg-1) and theoretical energy density (4,260 Wh L-1) which far exceed those of conventional lithium-ion cells. Nevertheless, after extensive study of both sulfur cathodes and lithium sulfide cathodes, neither of these technologies has been commercialized due to poor long-term cycle life and low demonstrated specific energy of lithium/sulfur cells. Practical applications require high sulfur loading electrodes together with the lowest “dead weight” possible in the cell while maintaining good performance. This is quite challenging because commercial current collectors have mechanical limitations in electrode loading and sulfur utiliation. Due to the insulating nature of S and Li2S, the addition of a significant amount of a conductive additive into the high loading electrodes is required and introduces more surface area, and thus more electrolyte is needed which further leads to more dead weight. Recently, lithium sulfide was proposed to be a more desirable electrode material because it permits the cell to be assembled in discharged state and avoids problems associated with volume expansion of sulfur during discharge. Disadvantages of lithium sulfide include challenging issues due to its sensitivity toward moisture and solubility in many organic solvents. In order to achieve high specific energy, we have developed a novel Li2S/KB@Cf electrode (Li2S content: 74 %,) using a robust 3-dimensional (3-D) current collector with a high Li2S loading up to 11.29 mg cm-2 (S loading: 7.85 mg cm-2), which can deliver an areal capacity of 7 mAh cm-2 after 50 cycles with an Electrolyte/Sulfur ratio of 5.5 (see Fig. 1). We will present our recent progress in high S loading cells and more detailed information about active material development, electrode composition and modifications of the electrolyte and cell configuration. Figure 1

Lithium Sulfide –Carbon Composite Use as Positive Electrode in Post Lithium Ion Batteries Technology

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Nanostructured Li₂S-C Composites As Cathode Material for High-Energy Lithium/sulfur Batteries.

Preparation and Electrochemical Evaluation of Porous Carbon-Sulfur Composite Cathode Materials for High Performance Lithium/Sulfur Cells

Synthesis of Lithium Sulfide (li2s) Wrapped Carbon Nano Composite for Binder-Free Li2S Cathode

Recent Progress in Sulfur Cathodes for Application to Lithium–sulfur Batteries

Cathode Nanostructuring and Separator Modification for High-Performance Lithium-Sulfur Batteries

(Invited) High Lithium Sulfide-Loading Electrode for Practical Li/S Cells

In situ synthesis of lithium sulfide–carbon composites as cathode materials for rechargeable lithium batteries

Low-Cost Synthesis Route for High-Performance S/C Composite with 90% S Content

Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

New approaches for high energy density lithium-sulfur battery cathodes

Enhanced Sulfur Transformation by Multifunctional FeS2/FeS/S Composites for High‐Volumetric Capacity Cathodes in Lithium–Sulfur Batteries

Lithium-sulfur battery cathode enabled by lithium-nitrile interaction

Sulfur Cathode Based on Layered Carbon Matrix for High-Performance Li–S Batteries

Three-Dimensional Reticulated Fe-Co Sulfide/Graphene/CNTs Composites As Functional Interlayer Capturing and Converting Polysulfide for High-Performance Lithium-Sulfur Batteries

Room-temperature Operation of Lithium Sulfide Positive and Silicon Negative Composite Electrodes Employing Oxide Solid Electrolytes for All-solid-state Battery

High-Rate and Long-Term Cycle Stability of Li-S Batteries Enabled by Li2S/TiO2-Impregnated Hollow Carbon Nanofiber Cathodes.

Review of Carbon Materials for Advanced Lithium–sulfur Batteries

Si/C Composites as Negative Electrode for High Energy Lithium Ion Batteries