Abstract:We report a class of high-voltage organic solar cells (OSCs) processed by the environmentally friendly solvent tetrahydrofuran (THF), where four benzotriazole (BTA)-based p-type polymers (PE31, PE32, PE33, and J52-Cl) and a BTA-based small molecule BTA5 are applied as p-type and n-type materials, respectively, according to "Same-A-Strategy" (SAS). The single-junction OSCs based on all four material blends exhibit a high open-circuit voltage (VOC) above 1.10 V. We systematically study the impact of the three different substituents (−OCH3, −F, −Cl) on the BTA unit of the polymer donors. Interestingly, PE31 containing the unsubstituted BTA unit shows the efficient hole transfer and more balanced charge mobilities, thus leading to the highest power conversion efficiency (PCE) of 10.08% with a VOC of 1.11 V and a JSC of 13.68 mA cm–2. Due to the upshifted highest electron-occupied molecular orbital (HOMO) level and the weak crystallinity of the methoxy-substituted polymer PE32, the resulting device shows the lowest PCE of 7.40% with a slightly decreased VOC of 1.10 V. In addition, after the chlorination and fluorination, the HOMO levels of the donor materials PE33 and J52-Cl are gradually downshifted, contributing to increased VOC values of 1.16 and 1.21 V, respectively. Our results prove that an unsubstituted p-type polymer can also afford high voltage and promising performance via non-halogenated solvent processing, which is of great significance for simplifying the synthesis steps and realizing the commercialization of OSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03757?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03757</a>.Test methods; synthesis of materials; 1H nuclear magnetic resonance spectrum and mass spectrum of compound 2 and compound M1; UV–vis curves of the pure polymers in solution and the four blend films; CV curves of the four polymers; JSC and VOC values versus the light intensity of the PSCs; optical and electrochemical parameters of the four compounds; photovoltaic performance of PE31/PE32/PE33/J52-Cl:BTA5 under different donor/acceptor weight ratios and at different thermal annealing temperatures; and relative data of blend films from the GIWAXS measurement (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03757/suppl_file/am1c03757_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Two-Pronged Effect of Warm Solution and Solvent-Vapor Annealing for Efficient and Stable All-Small-Molecule Organic Solar Cells

Solvent Annealing Enables 15.39% Efficiency All‐Small‐Molecule Solar Cells through Improved Molecule Interconnection and Reduced Non‐Radiative Loss

Tuning the Phase Separation by Thermal Annealing Enables High-Performance All-Small-Molecule Organic Solar Cells

Dual-Additive-Driven Morphology Optimization for Solvent-Annealing-Free All-Small-Molecule Organic Solar Cells

Deciphering the Role of Side‐Chain Engineering and Solvent Vapor Annealing for Binary All‐Small‐Molecule Organic Solar Cells

Efficient Large Area All‐Small‐Molecule Organic Solar Cells Fabricated by Slot‐Die Coating with Nonhalogen Solvent

Efficiency Boost in All‐Small‐Molecule Organic Solar Cells: Insights from the Re‐Ordering Kinetics

Gradual Optimization of Molecular Aggregation and Stacking Enables Over 19% Efficiency in Binary Organic Solar Cells

Miscibility Regulation and Thermal Annealing Induced Hierarchical Morphology Enables High‐Efficiency All‐Small‐Molecule Organic Solar Cells Over 17%

A Mixed‐Pure Planar Heterojunction Structure of Active Layers for Efficient Sequential Blade‐Coating Organic Solar Cells

Regulating the reorganization energy and crystal packing of small-molecule donors enables the high performance of binary all-small-molecule organic solar cells with a slow film growth rate

Mixed Solvent as a Critical Factor in Optimizing Phase Separation of All Small Molecule Organic Solar Cells

Morphology Controlling of All‐Small‐Molecule Organic Solar Cells: from Donor Material Design to Device Engineering

Highly Efficient All‐Small‐Molecule Organic Solar Cells with Appropriate Active Layer Morphology by Side Chain Engineering of Donor Molecules and Thermal Annealing

Introducing Siloxane-Terminated Side Chains in Small Molecular Donors for All-Small-Molecule Organic Solar Cells: Modulated Molecular Orientation and Enhanced Efficiency

Fabrication of High V OC Organic Solar Cells with a Non-Halogenated Solvent and the Effect of Substituted Groups for “Same-A-Strategy” Material Combinations

Equally high efficiencies of organic solar cells processed from different solvents reveal key factors for morphology control

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

Design of All-Small-Molecule Organic Solar Cells Approaching 14% Efficiency via Isometric Terminal Alkyl Chain Engineering

All green solvent and additive combination enables efficient non‐fullerene organic solar cells via sequentiao deposition strategy

Fine-Tuning Miscibility and π–π Stacking by Alkylthio Side Chains of Donor Molecules Enables High-Performance All-Small-Molecule Organic Solar Cells