Abstract:Fiber reinforced polymer (FRP) composite structures are widely being used in aircraft wings, wind turbine blades, helicopter rotor blades and tail rotors. These structures are often exposed to external dynamic loads which shorten their lifetime. Carbon nanotubes (CNT) reinforced epoxy resin have distinctive characteristic in providing a significant increase in mechanical properties and stiffness of the FRP composite. The present study investigates the micro, macro and structural analysis of composites with and without reinforcement of multi walled carbon nanotubes (MWCNT). The carboxylic acid (COOH) functionalized MWCNT with more than 95% chemical purity having average dimensions of 17 nm outer diameter and 10 μm length were used to characterize their chemical properties and evaluate the mechanical and free and forced vibration response of composites with and without MWCNT reinforcement. Initially, the powder form of the MWCNT was taken for the identification of true density (ρ) using the gas displacement technique. The COOH-MWCNT were then randomly dispersed in low viscosity epoxy resin (LY556) through an organic solvent using the ultrasonic liquid processor. Test samples were fabricated by adding the hardener (HY951) at 10:1 ratio in the sonicated solution to obtain the Young's Modulus (E) of MWCNT using Nano Indentation. Following this, Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Fourier Transform Infrared spectroscopy (FT-IR), Thermo gravimetric analysis (TGA) were also used to quantify the dispersion, distribution, structural integrity, aspect ratio, functional group and purity level of nanotubes. Further, the impact hammer test based on ASTM E1876, tensile test based on ASTM D3039 and free and forced vibration analysis of the hybrid composite beams were carried out to identify the elastic properties, fundamental natural frequencies, damping ratio and transverse deflection of the hybrid structure. It was shown that the addition of 1 wt% of COOH-MWCNT in fiber reinforced composite beam increases the stiffness of the structure and consequently increases the natural frequencies and damping at each resonant response dominant peaks. The strong adhesion of bonding and proper dispersion of CNTs in the wide surface area of composite strengthen the polymer composites substantially than those of the Glass/epoxy composite structures without reinforcement of MWCNT.

Performance of Electromagnetic Properties of Carbon Fiber Reinforced and AuNPs Functionalized MWCNTs Doped Hybride Composites

Electromagnetic Interference Shielding Properties of Nickel-Coated Carbon Fiber Veil/Acid-Functionalized Mwcnts/Epoxy Multiscale Composites

Effect of Low-Content Carbon Nanotubes on the Dielectric and Microwave Absorption Properties of Graphite/Polymer Nanocomposites

Electromagnetic wave absorption properties of porous carbon nanocomposite prepared by explosion method derived from energetic CuFe-MOF

The excellent electromagnetic wave absorbing properties of carbon fiber composites: the effect of metal content

Performance Simulation and Fused Filament Fabrication Modeling of the Wave-Absorbing Structure of Conductive Multi-Walled Carbon Nanotube/Polyamide 12 Composite

Material and Mechanical Characterization of Multi-Functional Carbon Nanotube Reinforced Hybrid Composite Materials

High‐performance electromagnetic shielding composite materials based on carbon nanotubes and Sandwich laminate structures

EMI shielding performance of nanocomposites with MWCNTs, nanosized Fe 3 O 4 and Fe

Dielectric spectroscopy and synergistic effects in epoxy composites filled with multi‐walled carbon nanotubes and carbon‐coated copper nanoparticles

Electromagnetic Characterization of a Multiwalled Carbon Nanotubes–Silver Nanoparticles-Reinforced Polyvinyl Alcohol Hybrid Nanocomposite in X-Band Frequency

Enhanced microwave absorption of epoxy composite by constructing 3D Co–C–MWCNTs derived from metal organic frameworks

High Content of Siliconized MWCNTs and Cobalt Nanowire with E-Glass/Kenaf Fibers as Promising Reinforcement for EMI Shielding Material

Synthesis and microwave absorbing properties of Ni–Cu ferrite/MWCNTs composites

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Research on the Electromagnetic Wave Absorbing Properties of Carbon Nanotube-Fiber Reinforced Cementitious Composite

MWCNT Modified Structure-Conductive Composite and Its Electromagnetic Shielding Behavior

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

Nickel Carbon Composite with Carbon Nanotubes for Efficient Electromagnetic Wave Absorption

Effects of silver nanowires and their surface modification on electromagnetic interference, transport and mechanical properties of an aerospace grade epoxy

Ultralight hard carbon nanotubes nanofiber foam/epoxy nanocomposites for comprehensive microwave absorption performance