Abstract:Medium-entropy Zr–Nb–Ti (ZNT) alloys are being extensively investigated as load-bearing implant materials because of their exceptional biocompatibility and corrosion resistance, and low magnetic susceptibility. Nevertheless, enhancing their yield strength while simultaneously decreasing their elastic modulus presents a formidable obstacle, significantly constraining their broader utilization as metallic biomaterials. In this study, three medium-entropy ZNT alloys, i.e., Zr 45 Nb 45 Ti 10 , Zr 42.5 Nb 42.5 Ti 15 , and Zr 40 Nb 40 Ti 20 (denoted ZNT 10 , ZNT 15 , and ZNT 20 , respectively), were designed based on the miscibility gap in the ZNT phase diagram and prepared by annealing of cold-rolled ingots. Their microstructures, mechanical properties, wear resistance, corrosion resistance, magnetic susceptibility, and biocompatibility were systematically studied. Spinodal decomposition occurred in the cold-rolled ZNT 10 and ZNTi 15 after annealing at 650°C for 2 h and resulted in nanoscale Zr-rich β 1 and (Nb, Ti)-rich β 2 phases, which significantly improved their yield strength and reduced their elastic modulus. The wear resistance of the alloys decreased with an increase in Ti content. Dense ZrO 2 , Nb 2 O 5 , and TiO 2 oxide layers were formed during the polarization process in Hanks' solution, which enhanced the corrosion resistance of the alloys. These ZNT alloys exhibited significantly lower magnetic susceptibility than medical Ti alloys. The ZNT alloys showed a cell viability of more than 94 % toward MG-63 cells after culturing for 3 d. Overall, the spinodal ZNT 15 showed the best combination of mechanical properties, wear resistance, corrosion resistance, low magnetic susceptibility, and sufficient biocompatibility among the three alloys. Statement of Significance This work reports on medium-entropy Zr–Nb–Ti (ZNT) alloys with heterostructure. Spinodal decomposition significantly improved their mechanical strength and reduced the elastic modulus of the alloys. The wear resistance of the ZNT alloys decreased with an increase in Ti content. Dense ZrO 2 , Nb 2 O 5 , and TiO 2 oxide layers were formed during the polarization process in Hanks' solution, which enhanced the corrosion resistance of the alloys. The ZNT alloys exhibited significantly lower magnetic susceptibility than medical Ti alloys. The ZNT alloys showed a cell viability of more than 94% toward MG-63 cells after culturing for 3 d. The results demonstrate that spinodal ZNT alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, high corrosion resistance, wear resistance, low magnetic susceptibility, and sufficient biocompatibility.

Compositional-segregation-induced dual-length-scale nanotubes for enhanced surface bioactivity of Ti-rich Ti65–Zr18–Nb16–Mo1 medium-entropy alloy

Ultra-high strength TiZrNbTa high entropy alloy substrate coated by coral-like metal oxide nanotubes to enhance biocompatibility

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

New TiTaNbZrMo high-entropy alloys for metallic biomaterials

An In Vitro Evaluation of the Hierarchical Micro/Nanoporous Structure of a Ti3Zr2Sn3Mo25Nb Alloy after Surface Dealloying

Investigations on microstructure and properties of Ti-Nb-Zr medium-entropy alloys for metallic biomaterials

Microstructure and Mechanical Properties of Biomedical Ti-Zr-Nb-Ta-Sn High-Entropy Alloys

Strontium-Loaded Nanotubes of Ti-24Nb-4Zr-8Sn Alloys for Biomedical Implantation

Medium-entropy Zr–Nb–Ti alloys with low magnetic susceptibility, high yield strength, and low elastic modulus through spinodal decomposition for bone-implant applications

Cytocompatibility and osteogenic activity of Ta-Ti-O nanotubes anodically grown on Ti6Al4V alloy

Anodization and nonstructural surface characterizations of fabricated Ti–29Nb–13Ta–7.1Zr alloy for biomedical applications and its mechanical, wettability, tribological, and corrosion properties

Construction of porous micro/nano structures on the surface of Ti–Mo–Zr alloys by anodic oxidation for biomedical application

Mechanical properties and biological behavior of refractory TiZrNbTa medium-entropy and TiZrHfNbTa high-entropy alloy nanofilms on AISI 316L for bone implants

Macro-micron-nano-featured surface topography of Ti-6Al-4V alloy for biomedical applications

Optimizing the cell compatibility and mechanical properties in TiZrNbTa medium-entropy alloy/β-Ti composites through phase transformation

Mechanical properties and biocompatibility evaluation of TiZrNbTaFe high entropy alloy films deposited using a hybrid HiPIMS and RF sputtering system

Fabrication of multilevel porous structure networks on Nb-Ta-Ti alloy scaffolds and the effects of surface characteristics on behaviors of MC3T3-E1 cells

Biocompatible As-Cast and Homogenized TiNbTaZrMoV High Entropy Alloys: Mechanical Properties, Corrosion Resistance and in Vitro Studies

Structure and properties of Ti-rich Ti–Zr–Nb–Mo medium-entropy alloys

Biocompatible Nanotube‐Strontium/polydopamine‐arginine–glycine–aspartic Acid Coating on Ti6Al4V Enhances Osteogenic Properties for Biomedical Applications

Microstructure and mechanical properties of biodegradable Zn-2Cu-0.1Ti alloy for orthopedic applications