Abstract:A thermodynamic model for open combined Brayton and inverse Brayton cycles is established considering the pressure drops of the working fluid along the flow processes and the size constraints of the real power plant using finite time thermodynamics in this paper. There are 11 flow resistances encountered by the gas stream for the combined Brayton and inverse Brayton cycles. Four of these, the friction through the blades and vanes of the compressors and the turbines, are related to the isentropic efficiencies. The remaining flow resistances are always present because of the changes in flow cross-section at the compressor inlet of the top cycle, combustion inlet and outlet, turbine outlet of the top cycle, turbine outlet of the bottom cycle, heat exchanger inlet, and compressor inlet of the bottom cycle. These resistances control the air flow rate and the net power output. The relative pressure drops associated with the flow through various cross-sectional areas are derived as functions of the compressor inlet relative pressure drop of the top cycle. The analytical formulae about the relations between power output, thermal conversion efficiency, and the compressor pressure ratio of the top cycle are derived with the 11 pressure drop losses in the intake, compression, combustion, expansion, and flow process in the piping, the heat transfer loss to the ambient, the irreversible compression and expansion losses in the compressors and the turbines, and the irreversible combustion loss in the combustion chamber. The performance of the model cycle is optimized by adjusting the compressor inlet pressure of the bottom cycle, the air mass flow rate and the distribution of pressure losses along the flow path. It is shown that the power output has a maximum with respect to the compressor inlet pressure of the bottom cycle, the air mass flow rate or any of the overall pressure drops, and the maximized power output has an additional maximum with respect to the compressor pressure ratio of the top cycle. When the optimization is performed with the constraints of a fixed fuel flow rate and the power plant size, the power output and efficiency can be maximized again by properly allocating the fixed overall flow area among the compressor inlet of the top cycle and the turbine outlet of the bottom cycle.

Effect of non-ideal gas working fluid on power and efficiency performances of an irreversible Otto cycle

Optimal Criteria for Different Parameters of an Irreversible Regenerative Intercooled Brayton Cycle under Maximum Power and Maximum Ecological COP Conditions

Efficient Power Characteristic Analysis and Multi-Objective Optimization for an Irreversible Simple Closed Gas Turbine Cycle

Power, Efficiency, Entropy-Generation Rate and Ecological Optimization for a Class of Generalized Irreversible Universal Heat-Engine Cycles

Performance Analysis and Parametric Optimum Criteria of a Regeneration Bose–Otto Engine

Power and Thermal Efficiency Optimization of an Irreversible Steady-Flow Lenoir Cycle

A new approach to the thermodynamic analysis of gas power cycles

Discussions of gas power cycle performance analysis method in the course of Engineering Thermodynamics

Performance Optimizations with Single-, Bi-, Tri-, and Quadru-Objective for Irreversible Diesel Cycle

Power Density Analysis and Multi-Objective Optimization for an Irreversible Dual Cycle

Power and efficiency optimization for combined Brayton and inverse Brayton cycles

Performance analysis and multi-objective optimization based on a modified irreversible Stirling cycle

Analysis of finite time thermodynamics on a real combined power cycle

Performance Analysis and Four-Objective Optimization of an Irreversible Rectangular Cycle

Optimal operating protocol to achieve efficiency at maximum power of heat engines

Power and efficiency optimizations of an irreversible regenerative organic Rankine cycle

Areal Closed Intercooled Reheating Regenerated Brayton Cycle Power Optimization

Power Optimization of a Closed Brayton Cycle with Endo-reversible Intercooling and Regenerative Heating

Performance analysis of quantum harmonic Otto engine and refrigerator under a trade-off figure of merit

Effect of Flow Losses in Heat Exchangers on the Performance of Organic Rankine Cycle

Endoreversible Otto engines at maximal power