Abstract:The feasibility of a solar-ORC system for domestic combined heat and power generation (CHP) is deeply affected by both the time-varying ambient conditions (e.g. solar irradiance, temperature, wind speed) and the thermal and electrical load profiles variability of the final application. The definition of a proper control strategy is proven to be a major design-challenge for successful operation of solar-ORC systems, with the main goal of assuring that the thermal power demand for space heating and Domestic Hot Water (DHW) production and the electricity needs are simultaneously satisfied. The rising demand for energy-autonomous systems also calls for the inclusion of a storage system within the base-layout, that could assure the electricity demand is properly matched after sunset or in very-low irradiance conditions, such as cloudy days. A comprehensive model accounts for the dynamic of the plant-integrated unit, featuring an ORC-based plant that bottoms a flat plate solar thermal collector: a parametric study is presented, and an off-design analysis is performed to properly assess the energy performance of the system. The heat availability to the ORC heat exchanger is evaluated, based on solar availability, thermal losses in the pipes and plant requirements, in terms of operating temperature and pressures and organic fluid mass flowrate. R245fa is selected as working fluid in the ORC-section. Sliding vanes machines expander and pump – are considered as rotary equipment. Flat plate heat exchangers complete the base layout, the analysis accounts for. Due to the need for DHW production, a storage unit for hot water is present, upstream the recovery branch: dependently on the ability the fluid at the collector outlet has to meet the ORC requirements for proper operation (about 110°C), the ORC evaporator is fed and the recovery section enabled. Both continuous and unsteady operation underwent an in-depth analysis, as well as the benefits associated with different discharge times for the storage unit. A dedicated control strategy is defined, dependently on whether the electrical output or the thermal one need to be maximized, and accounts for either a flash or a progressive tank discharge. A virtual platform allowed the setting-up of a pilot plant, for direct performance assessment, in presence of different amounts of tank discharges per day and different lower temperatures at the storage tank.

Design and Implementation of a Control Strategy for a Dynamic Organic Rankine Cycle Based Power System in the Context of Industrial Waste Heat Recovery.

Integrated Operation Design and Control of Organic Rankine Cycle Systems with Disturbances

Fast Economic Nonlinear Model Predictive Control Strategy of Organic Rankine Cycle for Waste Heat Recovery: Simulation-based Studies

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Parametric Study on Dynamic Behaviours of Basic Organic Rankine Cycle Recovering Waste Heat with Thermal Power Fluctuations

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Thermoeconomic Optimization Design of the ORC System Installed on a Light-Duty Vehicle for Waste Heat Recovery from Exhaust Heat

Optimizing Waste Heat Recovery with Organic Rankine Cycles: A Novel Graphical Approach Based on Exergy-Enthalpy Diagrams

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Optimal Design of Organic Rankine Cycles for Exhaust Heat Recovery from Light-Duty Vehicles in View of Various Exhaust Gas Conditions and Negative Aspects of Mobile Vehicles

Modified hierarchical strategy for transient performance improvement of the ORC based waste heat recovery system

Data-driven Identification and Fast Model Predictive Control of the ORC Waste Heat Recovery System by Using Koopman Operator

Recent developments of control strategies for organic Rankine cycle (ORC) systems

Data-Driven Model Identification and Efficient MPC Via Quasi-Linear Parameter Varying Representation for ORC Waste Heat Recovery System

Multi-Variable Control and Optimization Strategy for Domestic Solar-ORC Combined Heat and Power Generation System

Dynamic behaviour and performance evaluation of a biomass-fired organic Rankine cycle combined heat and power (ORC-CHP) system under different control strategies

System Design and Control for Waste Heat Recovery of Automotive Engines Based on Organic Rankine Cycle

Thermodynamic Analysis and Performance Optimization of an Orc (organic Rankine Cycle) System for Multi-Strand Waste Heat Sources in Petroleum Refining Industry

Parametric Design and Off-Design Analysis of Organic Rankine Cycle (ORC) System