Abstract:This paper presents a multi-layered Kretschmann configuration-based Surface Plasmon Resonance (SPR) biosensor for the detection of urine glucose. The modelling, simulation, and analysis have been done by using Silver (Ag) and Gold (Au) layer on the low refractive index prism BK-7 separately, which created two structures: structure-I (BK7/Ag/Bio-sample) and structure-II (BK7/Au/Bio-sample). Urine samples from a non-diabetic person (0–15 mg/dL) and a diabetic person (.625 gm/dL, 1.25 gm/dL, 2.5 gm/dL, 5 gm/dL, and 10 gm/dL) with the corresponding refractive indices of 1.335, 1.336, 1.337, 1.338, 1.341, and 1.347, respectively, have been used as a bio-sample that has been put on the top layer of the sensor. An investigation was conducted to improve the performance parameters of the proposed plasmonic biosensor by layering different 2-D nanomaterials (graphene, BP) and TMDC materials (MoS 2 , MoSe 2 , WS 2 , and WSe 2 ) over the silicon (Si) layer in both structures at a visible wavelength of 633 nm, using Transfer Matrix Method (TMM). With layer thickness optimization, Structure-I (BK7/Ag (56 nm/Si (3 nm)/WS2 (.8 nm)/Bio-sample) shows a sensitivity of 200 °/RIU which is enhanced up to 1.7 times that of the conventional biosensor (BK7/Ag/Bio-sample) and 1.3 times that of the BK7/Ag (56 nm)/Si (3 nm)/Bio-sample based biosensor. Whereas in Structure-II (BK7/Au (50 nm)/Si (3 nm)/BP (.53 nm)/Bio-sample) with optimised layer thickness, we obtained a sensitivity of 273.4°/RIU, which is enhanced up to 2.2 times that of the conventional biosensor (BK7/Au/Bio-sample) and 1.3 times that of the BK7/Au (50 nm)/Si (3 nm)/Bio-sample. Other performance parameters such as detection accuracy for Structure-I and Structure-II are .5617 degree −1 and .134 degree −1 respectively. The Figure of merit for Structure-I and Structure-II are 112.35/RIU and 36.89/RIU respectively. Therefore, we expect Structure-I (BK7/Ag (56 nm/Si (3 nm)/WS2 (.8 nm)/Bio-sample) and Structure-II (BK7/Au (50 nm)/Si (3 nm)/BP (.53 nm)/Bio-sample) have the potential to detect the glucose concentration with quick response and high sensitivity in terms of the resonance angle shift in SPR curves.

Sensitivity enhancement of optical plasmon-based sensor for detection of the hemoglobin and glucose: a numerical approach

A Symmetrical Optical Waveguide Based Surface Plasmon Resonance Biosensing System

A Highly Sensitive Long-Range Surface Plasmon Resonance Biosensor for the Determination of Hemoglobin Content in Human Blood

Numerical Study of Surface Plasmon Resonance Biosensor Employing Bismuth Ferrite, Black Phosphorus, and Zinc Telluride for Blood Group Detection

Numerical Investigation on High-Performance Cu-Based Surface Plasmon Resonance Sensor for Biosensing Application

Hybrid Structure–Based SPR Sensor for Chemical Sensing with Enhanced Sensitivity

Highly sensitive detection of infected red blood cells (IRBCs) with plasmodium falciparum using surface plasmon resonance (SPR) nanostructure

Enhancing Bimetallic SPR Sensor's Performance: The Role of 2D and TMDC Nanomaterials

Sensitivity Enhancement of SPR Sensor with the Black Phosphorus and Graphene with Bi-layer of Gold for Chemical Sensing

An ultra-sensitive surface plasmon resonance biosensor with PtSe2 and BlueP/WS2 heterostructure

Effect of 2-D nanomaterials on sensitivity of plasmonic biosensor for efficient urine glucose detection

Nanosensors Based on Bimetallic Plasmonic Layer and Black Phosphorus: Application to Urine Glucose Detection

Sensitivity enhancement of refractive index-based surface plasmon resonance sensor for glucose detection

Design and analysis of SPR-based refractive index sensor with enhanced sensitivity based on graphene/BP heterostructure

Optical biosensor based on enhanced surface plasmon resonance: theoretical optimization

Nanohole array integrated metal insulator metal (MIM) based structure employing dual mode SPR sensor for detection of Hemoglobin (Hb) in blood

Detection of Blood Plasma Concentration Theoretically Using SPR-Based Biosensor Employing Black Phosphor Layers and Different Metals

High performance SPR biosensor using Cu-Pt bimetallic layers and 2D materials

Numerical analysis of an advanced surface plasmon resonance biosensor utilizing nitride material-tungsten ditelluride-black phosphorus

Plasmon-Enhanced Refractive Index Sensing of Biomolecules Based on Metal-Dielectric-Metal Metasurface in the Infrared Regime

Highly Sensitive SPR Biosensor for Malaria Detection Employing ZnO, Fe2O3, and Black Phosphorous