Abstract:Transition metal selenide (TMS) is recognized as a prospective alternative anode material for the sodium ion battery application because of its high conductivity and high theoretical capacity. Herein, a simple hydrothermal method was used to prepare the ZIF-8 cubes and then followed by a selenization process to fabricate ZnSe nanoparticles decorated with hollow N-doped carbon (ZnSe/HNC) nanocubes. Our selenides exhibit good electrochemical sodium storage properties. It delivers a high initial discharge and charge capacities of 526.9 and 319.5 mAh g−1 at a current density of 100 mA g−1. The reversible capacity of as-prepared ZnSe/HNC nanocube electrode can be maintained at 335.7 mAh g−1 after 50 cycles at the current density of 100 mA g−1. As for rate capacity, the high reversible capacities of ZnSe/HNC nanocube electrode are 323.6, 306.9, 290.2, 262.0, 202.4, 173.6 and 115.4 mAh g−1 at different current densities of 100, 200, 500, 1000, 2000, 3000, 5000 mA g−1, respectively. In addition, the stability of the ZnSe/HNC nanocube electrode at high current density was also obtained. It can release a high and stable capacity of 251.1 mAh g−1 after 500 cycles at a current density of 500 mA g−1. The electrochemical sodium storage process and the reaction mechanism of the ZnSe/HNC nanocube electrode were confirmed by Ex-situ XRD study. Meanwhile, kinetic analysis of the electrochemical Na+ storage characteristics of the ZnSe/HNC nanocube demonstrates that the behavior of the external pseudocapacitor significantly contributes to good rate performance and good long cycle life. The good sodium storage performance of our ZnSe/HNC nanocube anode material can be attributed to the confinement of charge and discharge products for as-prepared ZnSe/HNC nanocube electrode material and the alleviation of volume change effect for our electrode material during cyclic process. This method can be used to adjust other TMS morphologies and structures to develop a new kind of anode materials for sodium ion battery applications.

Trash to treasure: Carbon-free ZnSe derived from waste zinc foil as a high-rate and long-life anode material enabling fast-charging sodium-ion batteries

Sn-C Bonding Riveted SnSe Nanoplates Vertically Grown on Nitrogen-Doped Carbon Nanobelts for High-Performance Sodium-Ion Battery Anodes

A low-cost NiSe2 derived from waste nickel foam as a high-performance anode for sodium ion batteries

ZnSe with nanostructure embedded in graphene nanosheets with elevated electrochemical performance for anode material of sodium ion battery

Facile Development of Disused Nickel Foams into Low-Cost and High-Performance Electrode Materials for Sodium-Ion Batteries

Hollow CoSe2-ZnSe Microspheres Inserted in Reduced Graphene Oxide Serving As Advanced Anodes for Sodium Ion Batteries

Construction of Ultrafine ZnSe Nanoparticles On/in Amorphous Carbon Hollow Nanospheres with High-Power-density Sodium Storage

Ultrathin CuSe nanosheets as the anode for sodium ion battery with high rate performance and long cycle life

Pomegranate-inspired Porous SnSe/ZnSe@C Anode: A Stress-Buffer Nanostructure for Fast and Ultrastable Sodium-Ion Storage

ZnSe nanoparticles decorated with hollow N-doped carbon nanocubes for high-performance anode material of sodium ion batteries

Assembly of Snse Nanoparticles Confined in Graphene for Enhanced Sodium-Ion Storage Performance

In-situ Rooting ZnSe/N-doped Hollow Carbon Architectures As High-Rate and Long-Life Anode Materials for Half/full Sodium-Ion and Potassium-Ion Batteries

3D Ordered Porous Hybrid of ZnSe/ N ‐doped Carbon with Anomalously High Na + Mobility and Ultrathin Solid Electrolyte Interphase for Sodium‐Ion Batteries

SnSe2 Nanocrystals Coupled with Hierarchical Porous Carbon Microspheres for Long-Life Sodium Ion Battery Anode

Mesoporous ZnS-Sb/C Reduced Graphene Oxide Nanostructures as Anode Materials for Sodium-Ion Batteries

Nitrogen-Doped carbon coated zinc selenide nanoparticles derived from metal−organic framework as high-rate and long-life anode materials for half/full sodium-ion batteries

Recycling the spent electronic materials to construct a high-performance Cu1.94S/ZnS heterostructure anode of sodium-ion batteries

Tannic acid etching construction of hollow heterogeneous CoSe2-FeSe2@nitrogen-doped carbon rhombic dodecahedron for high-performance sodium storage

ZnSe Modified Zinc Metal Anodes: Toward Enhanced Zincophilicity and Ionic Diffusion

g-C3N4 confined Sb2Se3 as high-performance anode towards rapid and stable Na-ion storage

Rich-oxygen-doped FeSe2 Nanosheets with High Pseudocapacitance Capacity As a Highly Stable Anode for Sodium Ion Battery