Abstract:As long as the energy consumption is intended to be more economical and more environment friendly, electrochemical energy production is under serious consideration as an alternative energy/power source. Among different energy/power storage devices, lithium-ion batteries (LIBs) are currently the best commercially available devices. However, there are safety issues to be investigated even when it is operating at room temperature since there have been various incidents reported. From that point of view, effective research has been going on to develop LIBs that are viable to operate safely at higher temperatures. In the search for better cathode materials for LIBs, researchers have been investigating a new class of iron-based compounds called polyanions such as (SO4)2−, (PO4)3,− or (AsO4)3−. Orthorhombic LiFePO4 (LFP), which has an ordered olivine structure, has attracted particular interest due to its high-power capability, non-toxicity, and thermal stability. This material has relatively high theoretical capacity of 170 mAhg−1 when compared with other cathode materials. The major drawbacks of the lithium iron phosphate (LFP) cathode include its relatively low average potential, weak electronic conductivity, poor rate capability, low Li+-ion diffusion coefficient, and low volumetric specific capacity. Hence, this chapter clearly emphasizes the role and progress of LFP as efficient cathode material for LIBs and their ways to overcome the existing drawbacks which include the optimization of their synthesis methods, controlling the diffusion rate, and modification strategies. The use of conventional electrolytes with LFP caused iron dissolution on the cathode surface, which catalyzed the electrolyte decomposition, which then contributed to the formation of thick obstructive solid electrolyte interphase (SEI) films. Use of electrolyte additives is one of the most effective methods to protect against LiFePO4 dissolution. The thermal stability of these materials can be accounted by the high Li+ ion diffusion rate and the electron transfer activity. Even at elevated temperatures up to 340 °C, charged LFP and electrolyte didn’t show any kind of chemical reactions, which makes this material thermally more feasible than other cathode materials like LiCoO2, LiNiO2, and LiMn2O4.

Open-framework iron(II) phosphate-oxalate as anode material for Li-ion batteries

Superior lithium storage in Fe<sub>2</sub>O<sub>3</sub> nanoporous arrays endowed by surface phosphorylation and bulk phosphorous doping

Mixed polyanionic manganese(II) phosphate-oxalate compound as anode material for Li-ion batteries

Fe3O4@C-500 anode derived by commercial ammonium ferric citrate for advanced lithium ion batteries

Lithium Iron Phosphate (LiFePO4) as High-Performance Cathode Material for Lithium Ion Batteries

High‐rate Lithium Iron(II) Phosphate as Cathode Material for Rechargeable Lithium Batteries

Facile Preparation of Interlocked Fe 2 O 3 /MOF Composite for Boosted Rate and Cycle Performance of Lithium-Ion Batteries

Electrochemical performance of Fe2(SO4)3 as a novel anode material for lithium-ion batteries

In-situ rooting biconical-nanorods-like Co-doped FeP @carbon architectures toward enhanced lithium storage performance

Amorphous Lithium-Phosphate-Encapsulated Fe 2 O 3 as a High-Rate and Long-Life Anode for Lithium-Ion Batteries

Coordinate regulation of amorphous carbon microspheres and crystal structure of iron oxalate for high rate lithium storage ability

Active-Site-Specific Structural Engineering Enabled Ultrahigh Rate Performance of the NaLi3Fe3(PO4)2(P2O7) Cathode for Lithium-Ion Batteries

Active-Site-Specific Structural Engineering Enabled Ultrahigh Rate Performance of the NaLi 3 Fe 3 (PO 4 ) 2 (P 2 O 7 ) Cathode for Lithium-Ion Batteries

Three-Dimensional Carbon-Coated LiFePO4 Cathode with Improved Li-Ion Battery Performance

Enabling high-performance lithium iron phosphate cathodes through an interconnected carbon network for practical and high-energy lithium-ion batteries

Robust spindle-structured FeP@C for high-performance alkali-ion batteries anode

Interfacial engineered Fe2O3@FeP nanorod arrays as capacitive storage dominated and high charge transfer anode for high-rate lithium-ion batteries

Enabling Long Cycle Life and High Rate Iron Difluoride Based Lithium Batteries by In Situ Cathode Surface Modification

Ordered mesoporous carbon-supported iron vanadate anode for fast-charging, high energy density, and stable lithium-ion batteries

Fe2O3 nanoparticles encapsulated in the inner walls of integrated 3D carbon tube grid as high-performance anode for lithium-ion batteries

Electrochemical Behavior of LiFePO4 Cathode Materials in the Presence of Anion Adsorbents